View the manual for the Pioneer DJM-750-K here, for free. This manual comes under the category DJ gear and has been rated by 1 people with an average of a 8.8. This manual is available in the following languages: English. Do you have a question about the Pioneer DJM-750-K or do you need help? Ask your question here




The Pioneer dj gear DJM-750-K features two scratcher platters, a mixer section with four channels, and a crossfader for seamless transitions. The mixer has a signal-to-noise ratio of 106 dB and a total harmonic distortion plus noise of 0.004%. It has a sample rate of 96 kHz and a USB port with version 2.0 for connectivity. The built-in display allows for easy navigation and control of the various effects, including the innovative "BOOST COLOR FX," which enhances different parts of the music based on the speed of knob rotation. The DJM-750-K does not have a built-in optical drive or Apple docking compatibility. It is designed to provide DJs with a versatile and intuitive tool for mixing and manipulating audio. With its high-quality sound and user-friendly interface, it is suitable for both professional and aspiring DJs looking to enhance their performance. Overall, the Pioneer DJM-750-K is a reliable and feature-rich option for those in the market for a high-performance DJ mixer. Its advanced technology and effects capabilities make it a valuable addition to any DJ setup.
| Brand | Pioneer |
| Model | DJM-750-K | DJM-750-K |
| Product | DJ gear |
| EAN | 4988028216398 |
| Language | English |
| Filetype | User manual (PDF) |
| Number of scratcher platters | 2 |
| Mixer section | Yes |
| Number of mixer channels | 4 channels |
| Crossfader | Yes |
| Built-in optical drive | No |
| USB direct playback | - |
| Signal-to-Noise Ratio (SNR) | 106 dB |
| Total Harmonic Distortion plus Noise (THD+N) | 0.004 % |
| Frequency range | 20 - 20000 Hz |
| Sample rate | 96 kHz |
| Product color | Black |
| Built-in display | Yes |
| USB port | Yes |
| USB version | 2.0 |
| Apple docking compatibility | Not supported |
| Microphone in | Yes |
| Number of microphone inputs | 1 |
| Microphone connectivity | XLR |
| XLR in | Yes |
| Audio (L/R) in | 4 |
| Audio (L/R) out | 4 |
| Booth (L, R) out | Yes |
| Record (L, R) out | Yes |
| Master (XLR) out | 1 |
| Master (L, R) out | 1 |
| Power supply type | AC |
| Width | 320 mm |
| Depth | 376 mm |
| Height | 108 mm |
| Weight | 7600 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer DJM-750-K below.
The Pioneer DJM-750-K has a weight of 7600 g.
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.
The Pioneer DJM-750-K has a height of 108 mm.
The Pioneer DJM-750-K has a width of 320 mm.
The Pioneer DJM-750-K has a depth of 376 mm.
Yes, the Pioneer DJM-750-K has a mixer section. This means that it allows users to control and adjust the audio levels and effects of multiple audio sources.
The Pioneer DJM-750-K has 4 channels. This means that users can connect and mix up to 4 different audio sources simultaneously.
Yes, the Pioneer DJM-750-K has a crossfader. This allows users to smoothly transition between audio sources and perform DJ techniques such as scratching.
No, the Pioneer DJM-750-K does not have a built-in optical drive. This means that users cannot directly play audio CDs or DVDs on the mixer. However, they can connect external devices such as CDJ players or laptops via the available USB port.
Yes, the Pioneer DJM-750-K has a built-in display. This allows users to easily navigate and access various settings and features of the mixer.
To enable the BOOST COLOR FX and SOUND COLOR FX effects on the Pioneer DJM-750-K DJ gear, follow these steps: 1. Press the [COLOR FX] selection button that is flashing to cancel the BOOST COLOR FX effect. 2. When the [BOOST] button is pressed and turned off, the function switches to SOUND COLOR FX. 3. Turn the beat effect selector switch to select the type of effect you want to use. Refer to the manual for the available types of effects. 4. Turn the effect channel selector switch to select the channel to which the effect will be applied. You can choose from channels 1 to 4, MIC channel, CF.A (left) or CF.B (right) side of the crossfader, or the MASTER channel. 5. Press the [BEAT c, d] button to set the beat fraction for synchronizing the effect sound. The effect time corresponding to the beat fraction will be set automatically. 6. Press the [ON/OFF] button for [BEAT EFFECTS] to apply the effect to the sound. The effect's time parameter can be adjusted by turning the [TIME] control, and the effect's quantitative parameter can be adjusted by turning the [LEVEL/DEPTH] control. 7. To input the BPM manually, tap the [TAP] button at least 2 times in rhythm with the beat of the sound being played. The average value of the interval at which the [TAP] button was tapped will be set as the BPM. By following these steps, you will be able to enable the BOOST COLOR FX and SOUND COLOR FX effects on the Pioneer DJM-750-K DJ gear.
If the sound quality of the Pioneer DJM-750-K DJ gear is not as expected, you can troubleshoot the issue by following these steps: 1. Check the connection: Ensure that the DJM-750-K and your audio source are properly connected. Use the included USB cable to connect the unit to your computer if you are using it as an audio source. 2. Verify audio output device settings: Make sure that you have selected the DJM-750-K as the audio output device in your application's settings. Refer to your application's operating instructions for guidance on how to make these settings. 3. Set the input selector switch: Set the input selector switch on the DJM-750-K to the appropriate position based on the input source you are using. For example, if you are using a computer, set it to the "USB" position. 4. Check the effect settings: If you are using the BOOST COLOR FX or SOUND COLOR FX effects, ensure that the effect channel selector switch is set to the proper position. Also, make sure that the COLOR control is set to an appropriate position. 5. Adjust the sound levels: Use the MASTER LEVEL control to adjust the sound level output from the master channel. Additionally, adjust the TRIM control for each channel to ensure that the input levels are properly set. By following these troubleshooting steps, you can address any issues with the sound quality of the Pioneer DJM-750-K DJ gear.
To connect the Pioneer DJM-750-K DJ gear to your computer for use with DJ software, follow these steps: 1. Disconnect the USB cable that connects the DJM-750-K to your computer if it is currently connected. 2. Install the driver software for the DJM-750-K on your computer. Insert the included CD-ROM into your computer's CD drive and follow the on-screen instructions to install the driver software. Make sure to read and agree to the software end user license agreement. 3. After the driver software installation is complete, connect the DJM-750-K to your computer using a USB cable. Ensure that you are using a USB 2.0 compatible port on your computer. 4. Power on the DJM-750-K by pressing the [POWER] button. 5. Wait for your computer to recognize the DJM-750-K. You may see a message indicating that the device driver software is being installed. Wait until the message "Your devices are ready for use" appears. 6. Open your DJ software on your computer and access the settings or preferences menu. 7. In the settings or preferences menu, select the DJM-750-K as the audio device or sound card for input and output. By following these steps, you will be able to connect the Pioneer DJM-750-K DJ gear to your computer for use with DJ software.
If the BEAT EFFECTs on the Pioneer DJM-750-K DJ gear are not working properly, you can troubleshoot the issue by following these steps: 1. Check the BEAT EFFECT settings: Ensure that the BEAT EFFECT is turned on by pressing the [ON/OFF] button for [BEAT EFFECTS]. Also, make sure that the SND/RTN setting is set to ON. 2. Verify the connection of external effector: If you are using an external effector, ensure that it is properly connected to the SEND or RETURN terminal on the DJM-750-K. 3. Adjust the audio output level of the external effector: If you are experiencing distorted sound from the external effector, check if the audio output level of the effector is set to an appropriate level. Adjust the output level accordingly. 4. Check the audio input level: If the tempo (BPM) cannot be measured or the measurement value is implausible, verify if the audio input level is too high or too low. Adjust the TRIM control for the channel so that the level indicator lights at about 0 dB at the peak level. 5. Manually input the tempo: If the tempo (BPM) measurement is not possible for some tracks, use the TAP button to manually input the tempo. 6. Verify MIDI settings: If MIDI control does not work, ensure that the MIDI channel is turned on by pressing the [ON/OFF] button for [MIDI]. Also, check if the MIDI settings are properly configured according to the instructions provided by your DJ software. 7. Reinstall the driver software: If the unit is not recognized after connecting it to a computer, reinstall the driver software. Make sure that the driver software is properly installed on your computer. By following these troubleshooting steps, you can address any issues with the BEAT EFFECTs on the Pioneer DJM-750-K DJ gear.
To adjust the settings of the 24 bit/96 kHz STEREO 4-IN 4-OUT SOUND CARD on the Pioneer DJM-750-K DJ gear, follow these steps: 1. Connect the DJM-750-K to your computer using a USB cable. 2. Install the driver software for the DJM-750-K on your computer. You can find the driver software on the Pioneer DJ website. 3. Open the settings or preferences menu of your DJ software on your computer. 4. In the settings or preferences menu, locate the audio settings or sound card settings. 5. Select the DJM-750-K as the audio device or sound card for input and output. 6. Adjust the sample rate of the sound card to 24 bit/96 kHz. This can usually be done within the audio settings of your DJ software. 7. Set the input and output channels of the sound card according to your needs. The DJM-750-K supports 4-in and 4-out channels, allowing you to route audio from different sources. 8. Save the settings and exit the settings or preferences menu. By following these steps, you will be able to adjust the settings of the 24 bit/96 kHz STEREO 4-IN 4-OUT SOUND CARD on the Pioneer DJM-750-K DJ gear for optimal audio performance.
Yes, the manual of the Pioneer DJM-750-K is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Pioneer and is the answer not in the manual?
Question and answer
Number of questions: 2Hi, I just bought a brand-new Pioneer DJM-750-K and when I turn it on it just has a rapidly blinking 'SETUP' light. Do I need to take this back to the store? What's up with it?
I have a problem how to solve it in Pioneer djm750k when setup light is continuously Blinking plz can u solve my problem