Pioneer DEH-P3500MP manual

Pioneer DEH-P3500MP
5.6 · 1
PDF manual
 · 8 pages
English
manualPioneer DEH-P3500MP
60°
5
6
Fig. 1
Abb. 1
Afb. 1
Fig. 2
Abb. 2
Afb. 2
53
182
1
2
3
4
<KSNZX/02L00000>

DEH-P3500MP

Printed in
Imprimé en
<CRD3675-A/JS> EW
This product conforms to new cord colors.
Los colores de los cables de este producto se confor-
man con un nuevo código de colores.
Dieses Produkt entspricht den neuen kabelfarben.
Le code de couleur des câbles utilisé pour ce produit
est nouveau.
Questo prodotto è conforme ai nuovi codici colori.
De kleuren van de snoeren van dit toestel zijn gewijzigd.
Fig. 3
Abb. 3
Afb. 3

INSTALLATION MANUAL

MANUEL D’INSTALLATION

7
Fig. 4
Abb. 4
Afb. 4
8
9
11
13
12
Fig. 5
Abb. 5
Afb. 5
Fig. 6
Abb. 6
Afb. 6
10
Fig. 7
Abb. 7
Afb. 7
14
Fig. 8
Abb. 8
Afb. 8
15
Fig. 9
Abb. 9
Afb. 9
Fig. 10
Abb. 10
Afb. 10
Fig. 11
Abb. 11
Afb. 11
CRD3675A 02.10.21 11:18 AM Page 1

View the manual for the Pioneer DEH-P3500MP here, for free. This manual comes under the category car radios and has been rated by 1 people with an average of a 5.6. This manual is available in the following languages: English. Do you have a question about the Pioneer DEH-P3500MP or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandPioneer
ModelDEH-P3500MP
Productcar radio
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer DEH-P3500MP below.

What is the difference between FM and AM?

FM stands for Frequency Modulation and AM stands for Amplitude Modulation. The biggest difference between FM radio stations compared to AM radio stations is the sound quality.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

My car radio does not turn on, now what?

If your car radio does not turn on, it will not receive any power. Check that the red wire is connected to the contact power supply and the yellow wire to the constant power supply.

How can I best clean my car radio?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

How do I troubleshoot back-up (or accessory) connections for the Pioneer DEH-P3500MP car radio?

To troubleshoot back-up (or accessory) connections for the Pioneer DEH-P3500MP car radio, follow these steps: 1. Identify the back-up (or accessory) connection wires. In most cases, the wires will be colored yellow and red. 2. Ensure that the yellow wire is connected to a terminal that always receives power, regardless of the ignition switch position. 3. Connect the red wire to an electric terminal controlled by the ignition switch. This terminal provides power when the ignition is turned on. 4. Connect the black wire to the vehicle's metal body to establish a proper ground connection. 5. If you are using a cellular telephone, connect it via the Audio Mute lead on the cellular telephone. If not, leave the Audio Mute lead free of any connections. 6. Double-check all the connections, making sure that leads of the same color are connected to each other. 7. If you are using additional accessories such as a power amp or multi-CD player, refer to the specific installation instructions for those devices and make the necessary connections. 8. Test the back-up (or accessory) connections by turning on the car radio and verifying that all functions and accessories are working properly. By following these steps, you can troubleshoot back-up (or accessory) connections for the Pioneer DEH-P3500MP car radio.

What should I do if I am having trouble connecting cords with RCA pin plugs to the car radio?

To troubleshoot connecting cords with RCA pin plugs to the Pioneer DEH-P3500MP car radio, follow these steps: 1. Ensure that you have the correct cords with RCA pin plugs. These cords are sold separately. 2. Identify the RCA input jacks on the car radio. They are usually labeled as "RCA input" or "Aux input." 3. Connect the RCA plugs of the cords to the corresponding RCA input jacks on the car radio. The colors of the plugs should match the colors of the jacks (e.g., red plug to red jack, white plug to white jack). 4. Make sure the connections are secure and tight to ensure proper audio transmission. 5. If you are connecting external devices such as a CD player or MP3 player, ensure that those devices are properly connected to the other end of the cords. 6. Double-check all the connections and ensure that there are no loose or disconnected cords. 7. Test the audio output by playing music or audio from the connected device. Adjust the volume and settings on the car radio as needed. By following these steps, you can troubleshoot connecting cords with RCA pin plugs to the Pioneer DEH-P3500MP car radio.

How can I troubleshoot power amp connections for the Pioneer DEH-P3500MP car radio?

To troubleshoot power amp connections for the Pioneer DEH-P3500MP car radio, follow these steps: 1. Before starting the installation, make sure to disconnect the battery cable to avoid shorts in the electrical system. 2. Refer to the owner's manual for specific instructions on connecting the power amp and other units. Make sure to follow the instructions correctly. 3. Identify the power amp and locate the system control terminal on it. 4. Connect the blue/white lead from the car radio to the system control terminal of the power amp. This lead sends a control signal to the power amp. 5. Ensure that the power amp is properly grounded. Connect the black lead of the car radio to the vehicle's metal body. 6. If you are using an external antenna, connect the blue/white lead to the auto-antenna relay control terminal. 7. Double-check all the connections to ensure they are secure and properly connected. 8. If you are using speakers with the power amp, make sure they are high-power types with a minimum rating of 50W and an impedance of 4 to 8 ohms. 9. Test the power amp connections by turning on the car radio and checking the audio output. Adjust the volume and settings as needed. By following these steps, you can troubleshoot power amp connections for the Pioneer DEH-P3500MP car radio.

What should I do if I am experiencing issues with the front and rear speaker connections of the car radio?

To troubleshoot issues with the front and rear speaker connections of the Pioneer DEH-P3500MP car radio, follow these steps: 1. Check the speaker connections at the back of the car radio. Ensure that the speaker wires are securely connected to the corresponding speaker output terminals. 2. Verify that the speaker wires are properly stripped and inserted into the terminals. Make sure there are no loose strands of wire that could cause a poor connection. 3. Ensure that the positive (+) and negative (-) terminals of the speakers are correctly connected to the corresponding positive and negative terminals on the car radio. 4. Double-check the impedance rating of the speakers. The Pioneer DEH-P3500MP car radio is compatible with speakers that have an impedance of 4 to 8 ohms. Make sure the speakers meet this requirement. 5. If you are using external amplifiers, ensure that the speaker outputs from the car radio are connected to the inputs of the amplifiers correctly. 6. Test the speaker connections by playing audio through the car radio. Check if all the speakers are producing sound and if the sound quality is clear and balanced. 7. If you are still experiencing issues with the speaker connections, consult the owner's manual for further troubleshooting steps or consider seeking professional assistance. By following these steps, you can troubleshoot issues with the front and rear speaker connections of the Pioneer DEH-P3500MP car radio.

How do I troubleshoot the installation process and fix the front panel of the Pioneer DEH-P3500MP car radio?

To troubleshoot the installation process and fix the front panel of the Pioneer DEH-P3500MP car radio, follow these steps: 1. Begin by disconnecting the negative terminal of the vehicle's battery to prevent any electrical mishaps during the installation process. 2. Refer to the owner's manual for specific instructions on installing the car radio. Follow the provided guidelines carefully. 3. Fasten the unit to the factory radio mounting bracket using the appropriate screws. Ensure that the screw holes of the bracket align with the screw holes of the head unit. 4. Attach the holders to both sides of the front panel and replace the front panel onto the unit. 5. Flip the holders into an upright position and fix the front panel to the unit using the supplied fixing screws. 6. Double-check all the connections and ensure that they are secure and properly tightened. 7. Before finalizing the installation, temporarily connect the wiring to ensure that everything is properly connected and functioning. 8. Install the unit in a location that does not obstruct the driver's view and does not pose a safety hazard to passengers. 9. Test the functionality of the front panel by operating the various controls and verifying that they work as intended. By following these steps, you can troubleshoot the installation process and fix the front panel of the Pioneer DEH-P3500MP car radio.

Is the manual of the Pioneer DEH-P3500MP available in English?

Yes, the manual of the Pioneer DEH-P3500MP is available in English .

Is your question not listed? Ask your question here

No results