Pioneer DDJ-WEGO2 manual

Pioneer DDJ-WEGO2
7.4 · 1
PDF manual
 · 22 pages
English
manualPioneer DDJ-WEGO2

DJ Controller

DDJ-WEGO2

Operating Instructions

http://pioneerdj.com/support/

The Pioneer DJ support site shown above offers FAQs, information on software and various other types of
information and services to allow you to use your product in greater comfort.

View the manual for the Pioneer DDJ-WEGO2 here, for free. This manual comes under the category DJ gear and has been rated by 1 people with an average of a 7.4. This manual is available in the following languages: English. Do you have a question about the Pioneer DDJ-WEGO2 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Pioneer DDJ-WEGO2 is a dj gear with two scratcher platters featuring built-in platter backlight. This device does not have a built-in optical drive or display. With a Signal-to-Noise Ratio (SNR) of 101 dB and Total Harmonic Distortion plus Noise (THD+N) of 0.006%, the Pioneer DDJ-WEGO2 ensures high-quality audio output. It is equipped with a USB port and is powered via USB. The device has one USB port and is compatible with Apple docking for iPad 4, iPad mini, iPhone 5, and iPod Touch 5. The Pioneer DDJ-WEGO2 is a compact and portable dj gear designed for easy use on the go. It allows DJs to seamlessly mix and scratch tracks with precision. The device's high SNR and low THD+N ensure clear and distortion-free sound quality during performances. The built-in platter backlight enhances visibility in low-light conditions, making it ideal for use in various settings. The Pioneer DDJ-WEGO2 is a reliable and versatile dj gear that caters to the needs of both beginner and experienced DJs. Its user-friendly design and compatibility with Apple devices make it a convenient choice for those looking to elevate their DJing experience.

General
BrandPioneer
ModelDDJ-WEGO2 | DDJ-WEGO2-K
ProductDJ gear
EAN12562907918, 4988028234927, 4988028234941, 4988028234965, 4988028235047, 4988028235061, 884938234931, 0884938234931, 0012562907918
LanguageEnglish
FiletypeUser manual (PDF)
Technical details
Number of scratcher platters2
Platter backlightYes
Mixer section-
Built-in optical driveNo
USB direct playback-
Signal-to-Noise Ratio (SNR)101 dB
Total Harmonic Distortion plus Noise (THD+N)0.006 %
Frequency range20 - 20000 Hz
Product colorBlack
Display
Built-in displayNo
Ports & interfaces
USB portYes
USB connector typeUSB Type-B
USB ports quantity1
Apple docking compatibilityiPad 4, iPad mini, iPhone 5, iPod Touch 5
Power
Power supply typeUSB
System requirements
Windows operating systems supportedWindows 7 Home Basic, Windows 7 Home Premium, Windows 7 Professional, Windows 7 Starter, Windows 7 Ultimate, Windows 8, Windows 8 Enterprise, Windows 8 Pro, Windows Vista Business, Windows Vista Enterprise, Windows Vista Home Basic, Windows Vista Home Premium, Windows Vista Ultimate, Windows XP Home, Windows XP Professional
Mac operating systems supportedMac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion
Minimum processorIntel Pentium 4, AMD Athlon XP
Minimum RAM512 GB
Minimum display resolution requirement1024 x 768 pixels
Minimum storage drive space50 MB
Weight & dimensions
Width380 mm
Depth250.6 mm
Height65 mm
Weight1800 g
Packaging content
Cables includedLightning, USB
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer DDJ-WEGO2 below.

What is the weight of the Pioneer DDJ-WEGO2?

The Pioneer DDJ-WEGO2 has a weight of 1800 g.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

What is the height of the Pioneer DDJ-WEGO2?

The Pioneer DDJ-WEGO2 has a height of 65 mm.

What is the width of the Pioneer DDJ-WEGO2?

The Pioneer DDJ-WEGO2 has a width of 380 mm.

What is the depth of the Pioneer DDJ-WEGO2?

The Pioneer DDJ-WEGO2 has a depth of 250.6 mm.

What type of USB connection does the Pioneer DDJ-WEGO2 have?

The Pioneer DDJ-WEGO2 has a USB Type-B connection.

Does the Pioneer DDJ-WEGO2 have a built-in optical drive?

No, the Pioneer DDJ-WEGO2 does not have a built-in optical drive. This means users will need to rely on digital music sources when using this DJ gear.

How many scratcher platters does the Pioneer DDJ-WEGO2 have?

The Pioneer DDJ-WEGO2 has 2 scratcher platters, providing users with more versatility and control during their DJ performances.

What is the Signal-to-Noise Ratio (SNR) of the Pioneer DDJ-WEGO2?

The Signal-to-Noise Ratio (SNR) of the Pioneer DDJ-WEGO2 is 101 dB, which is relatively high and indicates good audio quality compared to other DJ gear in its class.

Is the Pioneer DDJ-WEGO2 compatible with Apple devices?

Yes, the Pioneer DDJ-WEGO2 is compatible with Apple devices such as iPad 4, iPad mini, iPhone 5, and iPod Touch 5, giving users the option to easily connect and play music from their Apple devices.

What is the minimum display resolution requirement for the Pioneer DDJ-WEGO2?

The minimum display resolution requirement for the Pioneer DDJ-WEGO2 is 1024 x 768 pixels, ensuring users have a clear and detailed view of the DJ software interface while using this gear.

How do I connect the DDJ-WEGO2 to my computer and set it up as a controller for other DJ software?

To connect the Pioneer DDJ-WEGO2 to your computer and set it up as a controller for other DJ software, follow these steps: 1. Connect the DDJ-WEGO2 to your computer using a USB cable. 2. Make sure your computer has a built-in MIDI-compatible DJ software installed. 3. Open the DJ software on your computer. 4. In the DJ software's settings, locate the audio and MIDI settings. 5. Configure the DJ software to recognize the DDJ-WEGO2 as a MIDI controller. 6. Set the audio output of the DJ software to the DDJ-WEGO2. 7. Verify that the MIDI messages from the DDJ-WEGO2 are being received by the DJ software. 8. Test the connection by playing music files in the DJ software and checking if the sound is output from the DDJ-WEGO2. Please note that the specific steps may vary depending on the DJ software you are using. Refer to the operating instructions of your DJ software for detailed information on configuring it with the DDJ-WEGO2.

What should I do if the DDJ-WEGO2 is not recognized by my computer when I connect it?

If the Pioneer DDJ-WEGO2 is not recognized by your computer when you connect it, follow these steps to troubleshoot the issue: 1. Check if the power supply switch on the DDJ-WEGO2 is set to "ON". Make sure it is turned on. 2. Ensure that the USB cable included with the DDJ-WEGO2 is properly connected between the controller and your computer. 3. Avoid using a USB hub. Connect the DDJ-WEGO2 directly to your computer using the included USB cable. 4. If you have an iPhone or iPad connected to the DDJ-WEGO2, disconnect it. 5. Verify that the controls and sliders on the DDJ-WEGO2 and the DJ software you are using are synchronized. If they are not, adjust the controls on the DDJ-WEGO2 accordingly. 6. If you are unable to play music files, check if the files are damaged. Use undamaged music files. 7. If you experience distorted sound, ensure that the audio level input to the microphone terminal is set to an appropriate level. Adjust the audio level accordingly. 8. If you are using unbalanced output with a monaural cable, set the output level to a suitable level using the "MASTER VOL" control. 9. If the sound is interrupted while using DJ software, connect your computer to an AC power supply instead of using battery power. Adjust the driver software's latency value if necessary. 10. If there is no sound produced, make sure the USB cable is properly connected. Clean any dirt off the terminals and plugs before connecting. Check the driver software settings and ensure that the connected components and amplifiers are properly set. 11. If you hear noise or a booming sound in the sound, move any mobile phones away from the DDJ-WEGO2. If using an iPhone or iPad, switch it to flight mode. 12. If the "SYNC" function does not work properly, manually edit the beat grid if the analysis of the music files is incorrect. 13. If the sound is interrupted when the ASIO driver is set, make sure to set the ASIO driver before launching the DJ software. 14. Note that samples cannot be saved in sampler slots 7 or 8 unless you upgrade to VIRTUALDJ PRO FULL. By following these troubleshooting steps, you should be able to resolve the issue of the DDJ-WEGO2 not being recognized by your computer.

How can I troubleshoot MIDI connection issues with the DDJ-WEGO2?

To troubleshoot MIDI connection issues with the Pioneer DDJ-WEGO2, follow these steps: 1. Check if the power supply switch on the DDJ-WEGO2 is set to "ON". Ensure it is turned on. 2. Make sure the included USB cable is properly connected between the DDJ-WEGO2 and your computer. 3. Avoid using a USB hub. Connect the DDJ-WEGO2 directly to your computer using the included USB cable. 4. If you have an iPhone or iPad connected to the DDJ-WEGO2, disconnect it. 5. Verify that the controls and sliders on the DDJ-WEGO2 and the DJ software you are using are synchronized. Adjust the controls on the DDJ-WEGO2 accordingly. 6. If you are unable to play music files, check if the files are damaged. Use undamaged music files. 7. If you experience distorted sound, ensure that the audio level input to the microphone terminal is set to an appropriate level. Adjust the audio level accordingly. 8. If you are using unbalanced output with a monaural cable, set the output level to a suitable level using the "MASTER VOL" control. 9. If the sound is interrupted while using DJ software, connect your computer to an AC power supply instead of using battery power. Adjust the driver software's latency value if necessary. 10. If there is no sound produced, make sure the USB cable is properly connected. Clean any dirt off the terminals and plugs before connecting. Check the driver software settings and ensure that the connected components and amplifiers are properly set. 11. If you hear noise or a booming sound in the sound, move any mobile phones away from the DDJ-WEGO2. If using an iPhone or iPad, switch it to flight mode. 12. If the "SYNC" function does not work properly, manually edit the beat grid if the analysis of the music files is incorrect. 13. If the sound is interrupted when the ASIO driver is set, make sure to set the ASIO driver before launching the DJ software. 14. Note that samples cannot be saved in sampler slots 7 or 8 unless you upgrade to VIRTUALDJ PRO FULL. By following these troubleshooting steps, you should be able to resolve MIDI connection issues with the Pioneer DDJ-WEGO2.

What are the system requirements for installing the driver software for the DDJ-WEGO2?

The system requirements for installing the driver software for the Pioneer DDJ-WEGO2 are as follows: Minimum operating environment: - Supported operating systems: Mac OS X 10.5.x, Windows XP Home Edition/Professional (SP3 or later) - CPU and required memory: Intel® processor for Mac OS X, Intel® Pentium® 4 or AMD Athlon™ XP processor for Windows XP, 1 GB or more of RAM for both Mac and Windows - Hard disk: Free space of 50 MB or greater - Optical drive: Optical disc drive on which the CD-ROM can be read - USB port: A USB 2.0 port is required to connect the computer with the DDJ-WEGO2 - Display resolution: Resolution of 1,024 x 768 or greater Recommended operating environment: - Supported operating systems: Mac OS X 10.6.x, Windows 7 Professional 32-bit version - CPU and required memory: Intel® processor for Mac OS X, Intel® Core™ 2 or AMD Athlon™ X2 processor for Windows 7, 2 GB or more of RAM for both Mac and Windows - Hard disk: Free space of 200 MB or greater - Display resolution: Resolution of 1,280 x 1,024 or greater for Windows, Resolution of 1,440 x 900 or greater for Mac Please note that these are the basic system requirements, and additional requirements may apply depending on the specific DJ software you are using.

What should I do if I encounter any issues with the software included with the DDJ-WEGO2?

To troubleshoot any issues with the software included with the Pioneer DDJ-WEGO2, follow these steps: 1. Ensure that you have read the Software End User License Agreement (EULA) carefully before proceeding with the installation. 2. Turn off the power switch of the DDJ-WEGO2 and disconnect the USB cable connecting it to the computer. 3. Quit any other programs running on your computer before installing or uninstalling the driver software. 4. Make sure you are logged in as the administrator of your computer to authorize the installation of the driver software. 5. If you connect the DDJ-WEGO2 to your computer without installing the driver software first, it may cause errors depending on the system environment. 6. If the installation of the driver software is interrupted, start the installation procedure again from the beginning. 7. Check the Pioneer DJ support site for the latest information on the driver software and the VIRTUAL DJ LE software. 8. Uninstall any previous versions of VIRTUAL DJ before installing VIRTUAL DJ LE for the DDJ-WEGO2. 9. For Windows users, the ASIO driver must be installed. 10. Ensure that your computer meets the minimum operating environment requirements, including the supported operating system, CPU, memory, hard disk space, and display resolution. 11. Note that full functionality is not guaranteed on all computers, and additional memory may be required for optimal performance. By following these steps, you should be able to troubleshoot any issues with the software included with the Pioneer DDJ-WEGO2.

Is the manual of the Pioneer DDJ-WEGO2 available in English?

Yes, the manual of the Pioneer DDJ-WEGO2 is available in English .

Is your question not listed? Ask your question here

No results