Pioneer DCS-370 manual

Pioneer DCS-370
6.6 · 1
PDF manual
 · 141 pages
English
manualPioneer DCS-370
Operating Instructions
| Mode d’emploi | Bedienungsanleitung
Discover the benefits of registering your product online at
http://www.pioneer.co.uk
(or http://www.pioneer.eu).
Découvrez les nombreux avantages offerts en enregistrant votre
produit en ligne maintenant sur http://www.pioneer.fr
(ou http://www.pioneer.eu).
Bitte nutzen Sie die Möglichkeit zur Registrierung Ihres Produktes
unter http://www.pioneer.de (oder http://www.pioneer.eu)

DCS-363

XV-DV363

DVD/CD Receiver
Récepteur-lecteur DVD/CD
DVD/CD Receiver

S-DV363

Speaker System
Système Acoustique
Lautsprechersystem

DCS-370

XV-DV370

DVD/CD Receiver
Récepteur-lecteur DVD/CD
DVD/CD Receiver

S-DV370T

S-DV370SW

Speaker System
Système Acoustique
Lautsprechersystem
cover & anki.fm 1 ページ 2007年1月26日 金曜日 午前11時0分

View the manual for the Pioneer DCS-370 here, for free. This manual comes under the category home cinema sets and has been rated by 1 people with an average of a 6.6. This manual is available in the following languages: English. Do you have a question about the Pioneer DCS-370 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandPioneer
ModelDCS-370
Producthome cinema set
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer DCS-370 below.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my home cinema set?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How do I adjust the volume on the Pioneer DCS-370 home cinema set?

To adjust the volume on the Pioneer DCS-370 home cinema set, follow these steps: 1. Press the HOME MENU button on the remote control. 2. Use the arrow buttons (usually labeled as \uf069/\uf06a/\uf06b/\uf06c) to navigate to the "Audio Settings" option on the on-screen display. 3. Press the ENTER button to select the "Audio Settings" option. 4. Within the "Audio Settings" menu, you will find the "Audio DRC" (Dynamic Range Control) setting. This setting helps to balance the volume levels of different audio elements. 5. Use the arrow buttons to select the desired Audio DRC level: High, Medium, Low, or Off. - High: Brings up quieter sounds while controlling loud peaks. - Medium: Provides a moderate balance between quiet and loud sounds. - Low: Preserves the original dynamic range of the audio. - Off: Disables the Audio DRC feature. 6. Once you have selected the desired Audio DRC level, press the ENTER button to confirm the setting. 7. You can now adjust the volume using the VOLUME + and VOLUME - buttons on the remote control. By following these steps, you can easily adjust the volume on the Pioneer DCS-370 home cinema set to your preference.

Why is there no sound coming from the speakers of the Pioneer DCS-370 home cinema set?

If there is no sound coming from the speakers of the Pioneer DCS-370 home cinema set, you can troubleshoot the issue by following these steps: 1. Check the speaker connections: Ensure that all the speakers are properly connected to the corresponding speaker terminals on the back of the home cinema set. Make sure the connections are secure and there are no loose wires. 2. Verify the speaker settings: Access the "Audio Settings" menu on the on-screen display and navigate to the "Speakers settings" option. Check if the speaker configuration is correctly set to match your speaker setup (e.g., 5.1 channel). Adjust the settings if necessary. 3. Check the volume level: Ensure that the volume level is not set to minimum or muted. Use the volume buttons on the remote control to increase the volume and check if sound is audible. 4. Test different audio sources: Try playing audio from different sources, such as a DVD, CD, or USB, to determine if the issue is specific to a particular source. If there is no sound from any source, proceed to the next step. 5. Reset the system: If none of the above steps resolve the issue, try resetting the home cinema set to its factory default settings. Refer to the user manual for instructions on how to perform a system reset. By following these troubleshooting steps, you can identify and resolve the issue of no sound coming from the speakers of the Pioneer DCS-370 home cinema set.

How do I connect the Pioneer DCS-370 home cinema set to my TV?

To connect the Pioneer DCS-370 home cinema set to your TV, follow these steps: 1. Use an HDMI cable to connect the HDMI OUT port on the home cinema set to an HDMI input port on your TV. Ensure that the arrow on the cable connector is facing up for correct alignment. 2. If you want to listen to audio from the HDMI connection, make sure you have specified the HDMI audio output setting. Switch the system into standby mode, press SETUP on the remote control, choose HDMI OUT, and select the desired audio setting (AUDIO ON or AUDIO OFF). 3. Adjust the HDMI settings for resolution and color if needed. Refer to the "Video Output settings" section in the manual for more information. 4. Once the connection is established, turn on the TV and set it to the corresponding HDMI input source. By following these steps, you can successfully connect the Pioneer DCS-370 home cinema set to your TV using an HDMI cable. Enjoy your audio and video experience!

Why is the disc not playing on the Pioneer DCS-370 home cinema set?

If the disc is not playing on the Pioneer DCS-370 home cinema set, you can troubleshoot the issue by following these steps: 1. Check the disc compatibility: Ensure that the disc format is supported by the home cinema set. Refer to the "Disc compatibility table" in the manual to verify if the disc type (e.g., DVD, CD) and file format (e.g., MP3, JPEG) are compatible. 2. Clean the disc: Inspect the disc for any visible dirt, fingerprints, or scratches. Clean the disc using a soft, lint-free cloth, wiping from the center to the outer edge in a straight line. Avoid using abrasive materials or circular motions that may further damage the disc. 3. Properly load the disc: Make sure the disc is inserted correctly into the disc tray, with the label side facing up. Close the disc tray securely to ensure proper alignment. 4. Check for region compatibility: If the disc is a DVD-video, verify that the region code of the disc matches the region code of the home cinema set. If they do not match, the disc may not be playable. 5. Restart the system: If the above steps do not resolve the issue, try restarting the home cinema set by turning it off and then on again. This can help reset any temporary glitches. By following these troubleshooting steps, you can address the issue of the disc not playing on the Pioneer DCS-370 home cinema set.

How do I play music from a USB device on the Pioneer DCS-370 home cinema set?

To play music from a USB device on the Pioneer DCS-370 home cinema set, follow these steps: 1. Ensure that your USB device is compatible with the home cinema set. It should be a USB mass storage device, such as an external hard drive, flash drive, or digital audio player, formatted in FAT 16/32. 2. Locate the USB port on the front panel of the home cinema set. 3. With the home cinema set powered on, press the USB button on the remote control. 4. Connect your USB device to the USB port on the home cinema set. 5. The front panel display should show "USB DATA" to indicate that the device is recognized. 6. Press the play button (usually labeled as \uf064) on the remote control to start playback. 7. If your USB device contains audio files in formats like WMA, MP3, or MPEG-4 AAC, the home cinema set will play them. For JPEG files, a slideshow will start. 8. Use the remote control buttons to control playback, such as pause (\uf065), stop (\uf067), fast forward (\uf06e), and rewind (\uf06d). By following these steps, you can easily play music from a USB device on the Pioneer DCS-370 home cinema set. Enjoy your favorite tunes!

How do I adjust the volume on the Pioneer DCS-370 home cinema set?

To adjust the volume on the Pioneer DCS-370 home cinema set, follow these steps: 1. Press the HOME MENU button on the remote control. 2. Use the arrow buttons (usually labeled as \uf069/\uf06a/\uf06b/\uf06c) to navigate to the "Audio Settings" option on the on-screen display. 3. Press the ENTER button to select the "Audio Settings" option. 4. Within the "Audio Settings" menu, you will find the "Audio DRC" (Dynamic Range Control) setting. This setting helps to balance the volume levels of different audio elements. 5. Use the arrow buttons to select the desired Audio DRC level: High, Medium, Low, or Off. - High: Brings up quieter sounds while controlling loud peaks. - Medium: Provides a moderate balance between quiet and loud sounds. - Low: Preserves the original dynamic range of the audio. - Off: Disables the Audio DRC feature. 6. Once you have selected the desired Audio DRC level, press the ENTER button to confirm the setting. 7. You can now adjust the volume using the VOLUME + and VOLUME - buttons on the remote control. By following these steps, you can easily adjust the volume on the Pioneer DCS-370 home cinema set to your preference.

Why is there no sound coming from the speakers of the Pioneer DCS-370 home cinema set?

If there is no sound coming from the speakers of the Pioneer DCS-370 home cinema set, you can troubleshoot the issue by following these steps: 1. Check the speaker connections: Ensure that all the speakers are properly connected to the corresponding speaker terminals on the back of the home cinema set. Make sure the connections are secure and there are no loose wires. 2. Verify the speaker settings: Access the "Audio Settings" menu on the on-screen display and navigate to the "Speakers settings" option. Check if the speaker configuration is correctly set to match your speaker setup (e.g., 5.1 channel). Adjust the settings if necessary. 3. Adjust the speaker levels: Use the "Test Tone" feature in the "Audio Settings" menu to check the volume levels of each speaker. Ensure that the volume is balanced and consistent from each speaker when seated in the main listening position. Adjust the channel levels if needed. 4. Check the audio source: Make sure that the audio source (e.g., DVD, TV, USB) is properly connected to the home cinema set and the correct input source is selected. Also, ensure that the audio source is not muted and the volume is turned up. 5. Power cycle the system: If the above steps do not resolve the issue, try turning off the home cinema set and unplugging it from the power source. Wait for a few minutes, then plug it back in and turn it on again. This can help reset the system and resolve any temporary issues. By following these troubleshooting steps, you can identify and resolve the issue of no sound coming from the speakers of the Pioneer DCS-370 home cinema set.

How do I connect the Pioneer DCS-370 home cinema set to my TV?

To connect the Pioneer DCS-370 home cinema set to your TV, follow these steps: 1. Use an HDMI cable to connect the HDMI OUT port on the home cinema set to an HDMI input port on your TV. Ensure that the cable is securely plugged in. 2. On your TV, select the corresponding HDMI input source that you connected the home cinema set to. This can usually be done by pressing the "Input" or "Source" button on your TV remote and selecting the appropriate HDMI input. 3. Power on the Pioneer DCS-370 home cinema set and your TV. 4. Use the remote control of the home cinema set to navigate to the "Setup" menu. This can usually be accessed by pressing the "Setup" or "Menu" button on the remote. 5. In the "Setup" menu, use the arrow buttons to select the "HDMI OUT" option and press the "Enter" or "OK" button. 6. Choose the desired HDMI audio output setting. Select "Audio On" if you want the audio signals to be output through the HDMI connection. Select "Audio Off" if you prefer to use a different audio output method. 7. Confirm the settings and exit the "Setup" menu. By following these steps, you can successfully connect the Pioneer DCS-370 home cinema set to your TV using an HDMI cable.

Why is the disc not playing on the Pioneer DCS-370 home cinema set?

If the disc is not playing on the Pioneer DCS-370 home cinema set, you can troubleshoot the issue by following these steps: 1. Check the disc compatibility: Ensure that the disc you are trying to play is compatible with the Pioneer DCS-370. Refer to the disc compatibility table in the manual to verify if the disc format (e.g., DVD, CD, DivX) is supported. 2. Clean the disc: Inspect the disc for any visible dirt, fingerprints, or scratches. Clean the disc using a soft, lint-free cloth, wiping from the center to the outer edge in a straight line. Avoid using abrasive materials or circular motions that may further damage the disc. 3. Properly load the disc: Make sure the disc is inserted correctly into the disc tray, with the label side facing up. Close the disc tray securely. 4. Reset the system: If the issue persists, try resetting the Pioneer DCS-370 by turning it off and unplugging it from the power source. Wait for a few minutes, then plug it back in and turn it on again. This can help resolve any temporary system glitches. 5. Contact customer support: If none of the above steps resolve the issue, it is recommended to contact Pioneer customer support for further assistance. They can provide specific troubleshooting steps or advise on any potential hardware issues. By following these troubleshooting steps, you can address the issue of the disc not playing on the Pioneer DCS-370 home cinema set.

How do I play music from a USB device on the Pioneer DCS-370 home cinema set?

To play music from a USB device on the Pioneer DCS-370 home cinema set, follow these steps: 1. Ensure that your USB device is compatible with the Pioneer DCS-370. It should be a USB mass storage device, such as an external hard drive, flash drive, or digital audio player, formatted in FAT 16/32. 2. Connect your USB device to the USB terminal located on the front panel of the home cinema set. 3. Turn on the Pioneer DCS-370 and your TV. 4. Press the USB button on the remote control to switch the input source to USB. 5. Use the arrow buttons on the remote control to navigate through the files and folders on your USB device. Press the ENTER button to open a highlighted folder or play a selected file. 6. To start playback, press the PLAY button. You can use the PAUSE button to pause/unpause the playback. 7. During playback, you can use the SKIP buttons to jump to the previous or next file. The STOP button stops the playback. 8. If your USB device contains JPEG files, you can start a slideshow by pressing the PLAY button. The pictures will be displayed in order, and you can use the SKIP buttons to navigate through the slideshow. By following these steps, you can easily play music from a USB device on the Pioneer DCS-370 home cinema set.

How do I adjust the volume on the Pioneer DCS-370 home cinema set?

To adjust the volume on the Pioneer DCS-370 home cinema set, follow these steps: 1. Press the HOME MENU button on the remote control. 2. Use the arrow buttons (up, down, left, right) to navigate to the "Audio Settings" option on the on-screen display. 3. Press the ENTER button to select the "Audio Settings" option. 4. Within the "Audio Settings" menu, you will find the "Audio DRC" (Dynamic Range Control) setting. Use the arrow buttons to highlight this option. 5. Press the ENTER button to access the "Audio DRC" settings. 6. You can choose from different options for the "Audio DRC" setting, such as High, Medium, Low, or Off. Use the arrow buttons to select the desired option. 7. Once you have selected the desired "Audio DRC" setting, press the ENTER button to confirm your selection. 8. The volume adjustment will now be applied according to the chosen "Audio DRC" setting. By adjusting the "Audio DRC" setting, you can control the dynamic range of the sound, ensuring that quieter sounds are audible even at low volume levels.

Why is there no sound coming from the speakers of the Pioneer DCS-370 home cinema set?

If there is no sound coming from the speakers of the Pioneer DCS-370 home cinema set, you can try the following troubleshooting steps: 1. Check the speaker connections: Ensure that all the speakers are properly connected to the corresponding speaker terminals on the back of the home cinema set. Make sure the connections are secure and there are no loose wires. 2. Verify the speaker settings: Access the audio settings menu on the home cinema set and check the speaker configuration. Ensure that the correct speaker setup (e.g., 5.1 channel) is selected and that the speaker levels are properly adjusted. 3. Check the volume level: Increase the volume level using the remote control or the volume buttons on the home cinema set. Make sure the volume is not set to minimum or muted. 4. Test different audio sources: Try playing audio from different sources, such as a DVD, CD, or USB device. If there is no sound from a specific source, check the connections and settings for that particular source. 5. Reset the home cinema set: If the above steps do not resolve the issue, you can try resetting the home cinema set to its factory default settings. Refer to the manual for instructions on how to perform a reset. If the problem persists after following these steps, it is recommended to contact a Pioneer authorized service center or your dealer for further assistance.

How do I connect the Pioneer DCS-370 home cinema set to my TV?

To connect the Pioneer DCS-370 home cinema set to your TV, follow these steps: 1. Use an HDMI cable to connect the HDMI OUT port on the home cinema set to an HDMI input port on your TV. Ensure that the cable is securely plugged in. 2. Turn on your TV and set it to the corresponding HDMI input that you connected the home cinema set to. Use the TV remote or the input/source button on the TV to select the correct HDMI input. 3. If you are using an external audio device, such as a soundbar or AV receiver, you can connect it to the HDMI ARC (Audio Return Channel) port on your TV. This allows audio from the TV to be played through the home cinema set. Make sure to enable the HDMI ARC function on both the TV and the home cinema set. 4. Once the connections are made, power on the home cinema set and select the appropriate input source (e.g., DVD, Blu-ray, TV) using the remote control or the buttons on the home cinema set. 5. Adjust the volume on the home cinema set or use the TV remote to control the volume if the HDMI ARC function is enabled. By following these steps, you can successfully connect the Pioneer DCS-370 home cinema set to your TV and enjoy immersive audio and video playback.

Why is the disc not playing on the Pioneer DCS-370 home cinema set?

If the disc is not playing on the Pioneer DCS-370 home cinema set, you can try the following troubleshooting steps: 1. Check the disc format: Ensure that the disc you are trying to play is compatible with the Pioneer DCS-370. Refer to the disc compatibility table in the manual to verify if the disc format is supported. 2. Clean the disc: Inspect the disc for any visible dirt, fingerprints, or scratches. Clean the disc using a soft, lint-free cloth, wiping from the center to the outer edge in a straight line. Avoid using abrasive materials or circular motions that may further damage the disc. 3. Check the disc placement: Make sure the disc is inserted correctly into the disc tray of the home cinema set. Ensure that the label side of the disc is facing up. 4. Restart the home cinema set: Power off the home cinema set and unplug it from the power source. Wait for a few minutes, then plug it back in and power it on. Try playing the disc again. 5. Update the firmware: Check if there are any available firmware updates for the Pioneer DCS-370. Visit the Pioneer website and follow the instructions to download and install the latest firmware version. If the issue persists after following these steps, it is recommended to contact a Pioneer authorized service center or your dealer for further assistance.

How do I play music from a USB device on the Pioneer DCS-370 home cinema set?

To play music from a USB device on the Pioneer DCS-370 home cinema set, follow these steps: 1. Ensure that your USB device is compatible with the Pioneer DCS-370. It should be a USB mass storage device, such as an external hard drive, flash drive, or digital audio player, formatted in FAT 16/32. 2. Connect the USB device to the USB Type A port located on the front panel of the home cinema set. 3. Press the USB button on the remote control or the home cinema set to switch the input source to USB. 4. Use the remote control to navigate through the files and folders on the USB device. You can use the arrow buttons to move up/down the folder/file list and the ENTER button to open a highlighted folder or play a selected file. 5. To start playback, press the play button (▶). If the USB device contains audio files in formats like WMA, MP3, or MPEG-4 AAC, the music will start playing. You can use the pause button (||) to pause/unpause the playback. 6. If the USB device contains JPEG files, you can start a slideshow by pressing the play button (▶). The pictures will be displayed in order, and you can use the skip buttons (◀/▶) to navigate through the slideshow. By following these steps, you can enjoy playing music from a USB device on the Pioneer DCS-370 home cinema set.

Is the manual of the Pioneer DCS-370 available in English?

Yes, the manual of the Pioneer DCS-370 is available in English .

Is your question not listed? Ask your question here

No results