Pioneer BDP-51 FD manual

Pioneer BDP-51 FD
6.9 · 2
PDF manual
 · 72 pages
English
manualPioneer BDP-51 FD
Operating Instructions

Blu-ray Disc PLAYER

View the manual for the Pioneer BDP-51 FD here, for free. This manual comes under the category blu-ray players and has been rated by 2 people with an average of a 6.9. This manual is available in the following languages: English. Do you have a question about the Pioneer BDP-51 FD or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Pioneer BDP-51 FD is a blu-ray player that offers high-definition playback for movies and TV shows. This player is equipped with advanced features such as HDMI output, Dolby TrueHD, and DTS-HD Master Audio decoding for immersive sound quality. It also has a USB port for easy playback of media files from external devices. The BDP-51 FD has a sleek design that will complement any home entertainment setup. With its reliable performance and solid construction, this blu-ray player is a durable option for those looking to enhance their viewing experience. Please note that specific technical specifications may vary, so it is recommended to refer to the product manual for detailed information.

General
BrandPioneer
ModelBDP-51 FD
Productblu-ray player
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer BDP-51 FD below.

How do I play a Blu-ray disc on the Pioneer BDP-51 FD blu-ray player?

To play a Blu-ray disc on the Pioneer BDP-51 FD blu-ray player, follow these steps: 1. Ensure that the blu-ray player is connected to your TV or display device using an HDMI cable or other compatible video output connection. 2. Power on the blu-ray player and the TV. 3. Press the "Open/Close" button on the blu-ray player to open the disc tray. 4. Insert the Blu-ray disc into the disc tray, with the label facing up. 5. Press the "Open/Close" button again to close the disc tray. 6. Use the remote control or the buttons on the blu-ray player to navigate to the "Play" option in the menu. 7. Press the "Play" button to start playing the Blu-ray disc. 8. Use the remote control to control playback, such as pausing, skipping chapters, or adjusting the volume. Please note that the specific steps may vary slightly depending on the model and firmware version of the Pioneer BDP-51 FD blu-ray player. Refer to the user manual for detailed instructions if needed.

Why is the video output not displaying properly on my TV when connected to the blu-ray player?

If the video output is not displaying properly on your TV when connected to the Pioneer BDP-51 FD blu-ray player, you can follow these steps to troubleshoot the issue: 1. Check if the HDMI indicator on the blu-ray player is lit. If it is not lit, refer to the HDMI device's operating instructions and switch to the proper input. 2. Ensure that the terminals for outputting video signals are properly set. Press the VIDEO SELECT button to switch the HDMI OUT terminal. 3. Verify if the resolution is properly set. Use the OUTPUT RESOLUTION option to switch the output video resolution. 4. Make sure that the HDMI cable is properly connected. Insert the cable firmly and all the way in. 5. Check if a DVI device is connected. The picture may not be displayed properly if a DVI device is connected. Connect the device to a DIGITAL OUT (OPTICAL/COAXIAL) terminal or the AUDIO OUT (2 ch) terminals. 6. If the HDMI cable is damaged, replace it with a new one. 7. Adjust the HDMI Color Space setting if the pictures do not display properly on the TV. If the issue persists, refer to the operating instructions of the connected devices or consult customer support for further assistance.

How do I connect external speakers to the Pioneer BDP-51 FD blu-ray player for better audio quality?

To connect external speakers to the Pioneer BDP-51 FD blu-ray player for better audio quality, follow these steps: 1. Locate the audio output terminals on the blu-ray player. These are usually labeled as "AUDIO OUT" or "AUDIO OUT (2 ch)". 2. Determine the type of audio connection you will use. The Pioneer BDP-51 FD blu-ray player supports various audio output options, including analog (RCA) and digital (optical or coaxial) connections. 3. For analog audio output, use RCA cables to connect the "AUDIO OUT" or "AUDIO OUT (2 ch)" terminals on the blu-ray player to the corresponding audio input terminals on your external speakers. Ensure that the left and right channels are connected correctly. 4. For digital audio output, use an optical or coaxial cable to connect the "DIGITAL OUT" terminal on the blu-ray player to the corresponding digital audio input terminal on your external speakers or audio receiver. 5. Once the connections are made, power on the blu-ray player and the external speakers. 6. Access the audio settings on the blu-ray player's menu. Use the remote control or the buttons on the player to navigate to the "Speaker Setup" or "Audio Output" option. 7. Select the appropriate audio output mode (e.g., 2-channel or multi-channel) and adjust the channel levels if necessary. 8. Test the audio output by playing a Blu-ray disc or other media on the blu-ray player. Adjust the volume on the external speakers as needed. By following these steps, you can connect external speakers to the Pioneer BDP-51 FD blu-ray player and enhance the audio quality of your viewing experience.

Why is there no sound coming from the audio outputs of the blu-ray player?

If there is no sound coming from the audio outputs of the Pioneer BDP-51 FD blu-ray player, you can follow these steps to troubleshoot the issue: 1. Check if the disc being played is in slow motion or fast forward/reverse. No sound is output during these playback modes. 2. Inspect the disc for scratches. If the disc is scratched, it may affect the sound output. Clean the disc if necessary. 3. Ensure that the blu-ray player is properly connected to the other components, such as an AV receiver or amplifier. Check the audio output terminals and make sure they are securely connected. 4. Verify that the connected components, such as the AV receiver or amplifier, are properly set. Refer to their operating instructions and check the volume, input, and speaker settings. 5. Check if the audio cables are properly connected. Ensure that they are inserted firmly and securely. 6. Inspect the audio cables for any damage. If the cables are damaged, replace them with new ones. 7. If you are using an HDMI cable to connect the blu-ray player to the TV, note that the audio may not be output if you are watching the picture on a device that is not HDMI compatible. In this case, consider connecting the player to the TV using an optical digital audio cable, coaxial digital audio cable, or analog audio cables. 8. Make sure that the Audio Output Mode is properly set. If it is set to Multi-channel, the audio signals may not be output properly. Set it to 2 Channel. 9. Check the Speaker Setup settings to ensure that the speakers are properly configured. 10. For some Blu-ray discs, audio signals may only be output from the optical digital audio output terminal, coaxial digital audio output terminal, or HDMI output terminal. 11. If you have an AV receiver or amplifier connected to the HDMI OUT terminal, the AUDIO OUT (7.1 ch) terminals, or the DIGITAL OUT (COAXIAL/OPTICAL) terminal, check their audio output settings. 12. Verify if the Output Terminal Priority is properly set. If it is set to a different output terminal than the one you are using, the audio signals may not be output correctly. If the issue persists, consider consulting customer support for further assistance.

How do I set up the digital audio output on the Pioneer BDP-51 FD blu-ray player?

To set up the digital audio output on the Pioneer BDP-51 FD blu-ray player, follow these steps: 1. Determine the type of digital audio connection you will use. The Pioneer BDP-51 FD blu-ray player supports both optical and coaxial digital audio output. 2. Locate the DIGITAL OUT terminal on the blu-ray player. This terminal is usually labeled as "DIGITAL OUT" or "COAXIAL" for coaxial output, and "DIGITAL OUT" or "OPTICAL" for optical output. 3. Connect the appropriate digital audio cable (coaxial or optical) from the DIGITAL OUT terminal on the blu-ray player to the corresponding digital audio input terminal on your AV receiver, amplifier, or soundbar. 4. Ensure that the digital audio cable is securely connected to both the blu-ray player and the audio device. 5. Power on the blu-ray player and the audio device. 6. Access the audio settings on the blu-ray player's menu. Use the remote control or the buttons on the player to navigate to the "Audio Output" or "Audio Settings" option. 7. Select the digital audio output mode. Choose either "Coaxial" or "Optical" depending on the type of digital audio connection you have made. 8. Adjust any additional audio settings as desired, such as audio format (PCM, Dolby Digital, DTS), sample rate, or bitstream output. 9. Test the audio output by playing a Blu-ray disc or other media on the blu-ray player. Ensure that the audio is being output through the digital audio connection to your external audio device. By following these steps, you can set up the digital audio output on the Pioneer BDP-51 FD blu-ray player and enjoy enhanced audio quality through your external audio device.

Is the manual of the Pioneer BDP-51 FD available in English?

Yes, the manual of the Pioneer BDP-51 FD is available in English .

Is your question not listed? Ask your question here

No results