Pioneer BDP-120 manual

Pioneer BDP-120
8.2 · 4
PDF manual
 · 107 pages
English
manualPioneer BDP-120

Blu-ray Disc PLAYER

REPRODUCTOR de Blu-ray Disc

BDP-120

Operating Instructions

Manual de instrucciones

Printed in China Impreso en China <VRD1236-A>
K002_B_En

PIONEER CORPORATION

4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901, 905-479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270

Register Your Product on

http://www.pioneerelectronics.com (US)

http://www.pioneerelectronics.ca (Canada)

Registre su producto en

http://www.pioneerelectronics.com (EE.UU.)

http://www.pioneerelectronics.ca (Canadá)

Published by Pioneer Corporation.
Copyright © 2009 Pioneer Corporation.
All rights reserved.

BDP-120

Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer
Authorized Independent Service Company, or if you wish to purchase replacement parts,
operating instructions, service manuals, or accessories, please call the number shown
below.
1 – 8 0 0 – 4 2 1 – 1 4 0 4
Please do not ship your product to Pioneer without first calling the Customer Support at the
above listed number for assistance.
Pioneer Electronics Service, Inc.
P.O. BOX 1760, Long Beach,
CA 90801-1760, U.S.A.
For warranty information please see the Limited Warranty sheet included with your product.
Should this product require service in Canada, please contact a Pioneer Canadian
Authorized Dealer to locate the nearest Pioneer Authorized Service Company in Canada.
Alternatively, please contact the Customer Satisfaction Department at the following address:
Pioneer Electronics of Canada, Inc.
Customer Satisfaction Department
300 Allstate Parkway, Markham, Ontario L3R 0P2
1-877-283-5901
905-479-4411
For warranty information please see the Limited Warranty sheet included with your product.
Si ce produit doit être réparé au Canada, veuillez vous adresser à un distributeur autorisé
Pioneer du Canada pour obtenir le nom du Centre de Service Autorisé Pioneer le plus près
de chez-vous. Vous pouvez aussi contacter le Service à la clientèle de Pioneer:
Pioneer Électroniques du Canada, Inc.
Service Clientèle
300, Allstate Parkway, Markham, Ontario L3R 0P2
1-877-283-5901
905-479-4411
Pour obtenir des renseignements sur la garantie, veuillez vous reporter au feuillet sur la
garantie restreinte qui accompagne le produit.
S018_C_EF
BDP-120̲en̲es̲cover.indd1BDP-120̲en̲es̲cover.indd1 2009/02/1618:21:222009/02/1618:21:22

View the manual for the Pioneer BDP-120 here, for free. This manual comes under the category blu-ray players and has been rated by 4 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Pioneer BDP-120 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandPioneer
ModelBDP-120 | BDP-120
Productblu-ray player
EAN4977729959086, 5052178868116
LanguageEnglish
FiletypeUser manual (PDF)
Technical details
Disc types supportedBD-R, BD-RE, BD-ROM, DVD-R, DVD-R DL, DVD-RW
Video D/A Converter (DAC)12-bit/148.5MHz
Audio D/A Converter (DAC)24-bit/192kHz
USB 2.0 ports quantity1
HDMIYes
Component video (YPbPr/YCbCr) out1
Digital audio optical out1
Weight2700 g
Audio output - analog1
Power requirements100 - 240V, 50/60 Hz
Power consumption (typical)20 W
Power consumption (standby)0.6 W
Dimensions (WxDxH)420 x 268 x 58 mm
Other features
Power requirements100 - 240V, 50/60 Hz
Dimensions (WxDxH)420 x 268 x 58 mm
Audio output - analog1
Power
Power consumption (typical)20 W
Power consumption (standby)0.6 W
Storage
Disc types supportedBD-R, BD-RE, BD-ROM, DVD-R, DVD-R DL, DVD-RW
Video
Video D/A Converter (DAC)12-bit/148.5MHz
Weight & dimensions
Weight2700 g
Audio
Audio D/A Converter (DAC)24-bit/192kHz
Ports & interfaces
USB 2.0 ports quantity1
Component video (YPbPr/YCbCr) out1
Digital audio optical out1
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer BDP-120 below.

What is the weight of the Pioneer BDP-120?

The Pioneer BDP-120 has a weight of 2700 g.

Does the Pioneer BDP-120 have a HDMI port?

Yes, the Pioneer BDP-120 has a HDMI port, providing high-quality audio and video output for the user.

How many USB 2.0 ports does the Pioneer BDP-120 have?

The Pioneer BDP-120 has 1 USB 2.0 port, allowing users to easily connect external storage devices for media playback.

What is the power consumption of the Pioneer BDP-120 in standby mode?

The Pioneer BDP-120 has a power consumption of 0.6 Watts in standby mode, which is relatively low compared to other similar products, helping users save on energy costs.

How many component video outputs does the Pioneer BDP-120 have?

The Pioneer BDP-120 has 1 component video output, providing users with additional connection options for their displays.

What are the dimensions of the Pioneer BDP-120?

The Pioneer BDP-120 has dimensions of 420 x 268 x 58 mm, making it a compact and space-saving option for users looking to add a Blu-ray player to their entertainment setup.

How do I troubleshoot if the Pioneer BDP-120 blu-ray player is not turning on?

To troubleshoot if the Pioneer BDP-120 blu-ray player is not turning on, you can follow these steps: 1. Check the power cord: Ensure that the power cord is firmly plugged into the AC outlet. Make sure there are no loose connections or damage to the cord. 2. Press and hold the STANDBY/ON button: If the power cord is properly connected, press and hold the STANDBY/ON button on the player until "ON" appears on the front panel display. Then, after the STANDBY/ON indicator is lit, turn on the power. 3. Check the remote control: If the player still doesn't turn on, make sure the batteries in the remote control are not depleted. Replace them if necessary. 4. Check the auto power settings: If the player's power is turning on or off automatically, check the "Settings" menu for options like "Auto Power Off" or "KURO LINK" that may be affecting the power behavior. Adjust the settings as needed. 5. Perform a reset: If the above steps don't resolve the issue, perform a reset by turning off the power and turning it on again. During the system processing, the BD/DVD/CD disc indicator on the front panel display may blink. Once the system processing is complete, the player should be ready for use. If the problem persists after following these troubleshooting steps, it is recommended to contact the nearest service center approved by Pioneer for further assistance.

How do I troubleshoot if the blu-ray player is not playing discs?

To troubleshoot if the Pioneer BDP-120 blu-ray player is not playing discs, you can follow these steps: 1. Check the disc: Ensure that the disc is clean and free from scratches or dirt. Clean the disc if necessary. 2. Properly load the disc: Make sure the disc is loaded properly into the disc tray, with the label side facing up. Ensure that the disc is aligned correctly in the tray. 3. Check the region code: Verify that the region code of the disc matches the region code of the blu-ray player. If they are not compatible, the player will not be able to play the disc. 4. Check the disc format: Ensure that the disc is recorded in a compatible format (BDMV/BDAV for BD-RE/R discs). Discs recorded in other formats may not be playable. 5. Check for compatibility issues: Some discs may not be compatible with the blu-ray player due to recording issues or compatibility problems. Try playing a different disc to see if the issue persists. If the problem continues after following these troubleshooting steps, it is recommended to contact the nearest service center approved by Pioneer for further assistance.

How do I troubleshoot if there is no audio or video output from the blu-ray player?

To troubleshoot if there is no audio or video output from the Pioneer BDP-120 blu-ray player, you can follow these steps: 1. Check the cables: Ensure that the cables connecting the blu-ray player to the TV or audio equipment are connected correctly and securely. Make sure there are no loose connections or damaged cables. 2. Verify the input settings: Check that the TV or audio equipment is set to the correct input source for the blu-ray player. Use the TV or audio equipment remote control to switch to the appropriate input. 3. Clean the disc: If there is no video output, remove the disc from the player and clean it. Ensure that the disc is free from scratches or dirt that may affect playback. 4. Check the region code: Confirm that the region code of the disc matches the region code of the blu-ray player. Incompatible region codes can prevent playback. 5. Check the audio settings: Verify that the audio settings on the blu-ray player are correctly configured. Ensure that the audio output is set to the desired format (e.g., stereo, surround sound) and that the volume is not muted or set too low. If the issue persists after following these troubleshooting steps, it is recommended to contact the nearest service center approved by Pioneer for further assistance.

How do I troubleshoot if the blu-ray player is not connecting to my TV or other devices?

To troubleshoot if the Pioneer BDP-120 blu-ray player is not connecting to your TV or other devices, you can follow these steps: 1. Check the cables: Ensure that the cables connecting the blu-ray player to the TV or other devices are connected correctly and securely. Make sure there are no loose connections or damaged cables. 2. Verify the input settings: Check that the TV or other devices are set to the correct input source for the blu-ray player. Use the remote control of the TV or other devices to switch to the appropriate input. 3. Check the HDMI connection: If you are using an HDMI cable, ensure that it is properly connected to both the blu-ray player and the TV. Try using a different HDMI cable or a different HDMI port on the TV to rule out any issues with the cable or port. 4. Check the audio settings: Verify that the audio settings on the blu-ray player are correctly configured. Ensure that the audio output is set to the desired format (e.g., stereo, surround sound) and that the volume is not muted or set too low. 5. Restart the devices: Turn off the blu-ray player, TV, and any other devices connected to the setup. Unplug the power cords from the devices, wait for a few minutes, and then plug them back in. Turn on the devices and check if the connection is established. If the issue persists after following these troubleshooting steps, it is recommended to contact the nearest service center approved by Pioneer for further assistance.

How do I troubleshoot if the remote control is not working with the blu-ray player?

To troubleshoot if the remote control is not working with the Pioneer BDP-120 blu-ray player, you can follow these steps: 1. Check the batteries: Ensure that the batteries in the remote control are not depleted. Replace them with fresh batteries if necessary, making sure to insert them correctly. 2. Remove any obstacles: Make sure there are no objects blocking the line of sight between the remote control and the blu-ray player. Remove any obstacles that may be interfering with the signal. 3. Clean the remote control: Check if there is any dirt or debris on the remote control's buttons or infrared sensor. Clean them gently using a soft, lint-free cloth. 4. Reset the remote control: If the previous steps don't resolve the issue, try resetting the remote control. Remove the batteries, press and hold any button on the remote control for a few seconds, and then reinsert the batteries. 5. Pair the remote control: If the remote control still doesn't work, try pairing it with the blu-ray player. Refer to the blu-ray player's manual for instructions on how to pair the remote control. If the problem persists after following these troubleshooting steps, it is recommended to contact the nearest service center approved by Pioneer for further assistance.

Is the manual of the Pioneer BDP-120 available in English?

Yes, the manual of the Pioneer BDP-120 is available in English .

Is your question not listed? Ask your question here

No results