View the manual for the Pioneer AVIC-Z140BH here, for free. This manual comes under the category navigators and has been rated by 3 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Pioneer AVIC-Z140BH or do you need help? Ask your question here





| Brand | Pioneer |
| Model | AVIC-Z140BH | AVIC-Z140BH |
| Product | navigator |
| EAN | 884938162180, 0884938162180 |
| Language | English |
| Filetype | User manual (PDF) |
| Marine (chartplotters, sounders) | - |
| Sport (fitness, running) | - |
| Outdoor (hiking, trekking) | - |
| Geocaching (GPS stash hunt) | - |
| Auto | Yes |
| Aviation | - |
| - | |
| Truck | - |
| Camper/Caravan | - |
| Bicycle | - |
| Golf | - |
| Traffic Message Channel (TMC) | Yes |
| Live service | - |
| Live Traffic Message Channel (TMC) | - |
| Auto re-route | Yes |
| Number of points of interest | 12000000 |
| Address input | Street |
| Languages support | - |
| Maps included | Yes |
| Map coverage | Alaska, Canada, USA |
| Map view options | 2D/3D |
| Touchscreen | Yes |
| Display diagonal | 7 " |
| Widescreen | Yes |
| Backlight display | Yes |
| Display resolution | 800 x 480 pixels |
| Display | LCD |
| Native aspect ratio | 16:9 |
| Placement supported | Horizontal |
| Storage media type | Flash |
| Compatible memory cards | SD, SDHC |
| Included memory card size | 4 GB |
| Audio formats supported | MP4, WMA |
| Video formats supported | DIVX, H.264, MPEG4, WMV |
| Text-to-speech message reader | Yes |
| DVD player | Yes |
| CD player | Yes |
| MP3-player | Yes |
| Built-in speaker(s) | Yes |
| Built-in camera | Yes |
| Bluetooth | Yes |
| Product color | Black |
| Form factor | Fixed |
| USB 2.0 ports quantity | 1 |
| AV input | Yes |
| Weight | - g |
| Supported radio bands | FM |
| Preset stations quantity | 24 |
| Power source type | Cigar lighter |
| Battery technology | - |
| Handheld remote control | Yes |
| Manual | Yes |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer AVIC-Z140BH below.
The Pioneer AVIC-Z140BH has a weight of - g.
No, no internet is required to receive GPS.
The abbreviation GPS stands for 'Global Positioning System'.
GPS is a system that can be used all over the globe to determine your location by means of satellites.
With most navigation systems it is possible to update maps. Most brands periodically update the maps.
The screen size of the Pioneer AVIC-Z140BH is 7 ".
The screen resolution of the Pioneer AVIC-Z140BH is 800 x 480 pixels.
Yes, the Pioneer AVIC-Z140BH has a touchscreen. This allows for easy and intuitive navigation through menus and maps.
Yes, the Pioneer AVIC-Z140BH has Traffic Message Channel (TMC) which provides traffic updates to help the user avoid congested areas and plan their route accordingly.
Yes, the Pioneer AVIC-Z140BH has auto re-route functionality. This means that if the user deviates from the original route, the navigator will automatically calculate and provide a new route to their destination.
The Pioneer AVIC-Z140BH has 12,000,000 points of interest. This is a high number and provides the user with a wide range of options for finding nearby attractions, restaurants, gas stations, etc.
The Pioneer AVIC-Z140BH has a 7" display diagonal. This is a decent size for a car navigation system and provides a clear and easily readable view of maps and menus.
To input an address for navigation on the Pioneer AVIC-Z140BH navigator, follow these steps: 1. Ensure that the navigation system is powered on and the display is active. 2. On the main menu, locate and select the "Navigation" option. This will open the navigation interface. 3. In the navigation interface, look for the "Address" or "Destination" option and select it. This will allow you to input a specific address for navigation. 4. Use the on-screen keyboard or physical buttons, if available, to enter the address information. Start by selecting the country or region, followed by the city or town, and then the street name and number. 5. As you enter the address, the system may provide suggestions or auto-complete options to help you find the correct location. Select the appropriate option when it appears. 6. Once you have entered the complete address, verify the information on the screen and select the "Go" or "Start" button to begin navigation to the specified address. Please note that the exact steps may vary slightly depending on the specific version of the Pioneer AVIC-Z140BH navigator you are using.
If the touchscreen is not responding when you try to use the navigation features on the Pioneer AVIC-Z140BH navigator, follow these steps to troubleshoot the issue: 1. Check for any physical obstructions on the touchscreen. Clean the screen with a soft, lint-free cloth to remove any dirt or debris that may be affecting the touch sensitivity. 2. Ensure that the screen is not damaged or cracked. If there is physical damage, it may be necessary to replace the touchscreen. 3. Restart the navigation system by turning it off and then on again. This can help reset any temporary software glitches that may be causing the touchscreen issue. 4. If the issue persists, perform a factory reset on the navigation system. Refer to the user manual for instructions on how to perform a factory reset. Note that this will erase all saved settings and data, so make sure to back up any important information before proceeding. 5. If none of the above steps resolve the issue, it may indicate a hardware problem. In this case, it is recommended to contact Pioneer customer support or take the device to an authorized service center for further assistance. Please note that these troubleshooting steps are general recommendations and may vary depending on the specific version of the Pioneer AVIC-Z140BH navigator you are using.
To change the language settings on the Pioneer AVIC-Z140BH navigator, follow these steps: 1. On the main menu, locate and select the "Settings" option. This will open the settings menu. 2. In the settings menu, look for the "Language" or "Language Settings" option and select it. This will allow you to change the language settings. 3. A list of available languages will be displayed. Use the touchscreen or physical buttons, if available, to scroll through the list and select the desired language. 4. Once you have selected the language, confirm your selection by pressing the "OK" or "Enter" button. 5. The navigator will prompt you to confirm the language change. Follow the on-screen instructions to complete the process. Please note that the exact steps may vary slightly depending on the specific version of the Pioneer AVIC-Z140BH navigator you are using.
If the audio is not playing through the speakers when using the navigation system on the Pioneer AVIC-Z140BH navigator, follow these steps to troubleshoot the issue: 1. Check the speaker connections to ensure they are properly connected. Make sure the speaker wires are securely plugged into the corresponding speaker outputs on the navigation system. 2. Verify that the speaker wires are not damaged or frayed. If any wires are damaged, replace them with new ones. 3. Check the audio settings on the navigation system. Ensure that the volume is not muted or set to a very low level. Adjust the volume settings as needed. 4. If you are using external amplifiers or a power amp, ensure that they are properly connected and powered on. Check the connections between the navigation system and the amplifiers to ensure they are secure. 5. If the issue persists, try resetting the navigation system to its factory settings. Refer to the user manual for instructions on how to perform a factory reset. If the above steps do not resolve the issue, it is recommended to contact Pioneer customer support or consult a professional for further assistance.
To update the maps on the Pioneer AVIC-Z140BH navigator, follow these steps: 1. Connect the navigation system to a computer using a USB cable. 2. Visit the Pioneer website and navigate to the support section. 3. Locate the software and firmware updates for the AVIC-Z140BH navigator. 4. Download the latest map update file compatible with your device. 5. Extract the downloaded file to a USB flash drive. 6. Safely eject the USB flash drive from the computer. 7. Insert the USB flash drive into the USB port of the navigation system. 8. On the navigation system, go to the settings menu and select the "Map Update" or "Software Update" option. 9. Follow the on-screen instructions to initiate the map update process. 10. The navigation system will detect the update file on the USB flash drive and begin installing the new maps. 11. Wait for the update process to complete. This may take some time depending on the size of the update. 12. Once the update is finished, remove the USB flash drive from the navigation system. Please note that the exact steps may vary slightly depending on the specific version of the Pioneer AVIC-Z140BH navigator you are using.
Yes, the manual of the Pioneer AVIC-Z140BH is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Pioneer and is the answer not in the manual?
Question and answer
Number of questions: 3I m unable to get top menu or home page settings
Can I still get a up date on my avic z140bh navigation receiver
How do I turn it on