Pioneer AVIC-F40BT manual

Pioneer AVIC-F40BT
7.1 · 3
PDF manual
 · 2 pages
English
manualPioneer AVIC-F40BT

Basic hardware buttons

Quick Start Guide

This guide is intended to guide you through the basic functions of this
navigation system. For details, please refer to Operation Manual.

Searching for your destination

by address

1 Display the “Destination

Menu” screen and touch
Address.

2 Select the country you

desire.

3 Input the information that

you want to set as the des-
tination.
Touch one of the options. After
narrowing down your destina-
tion, the Location confirmation
screen will appear.

4 Touch OK.

After searching for the destina-
tion, the Route confirmation
screen appears.

5 Touch OK.

The navigation system gives you
route guidance both visually and
by voice.

Screen switching overview

© 2011 PIONEER CORPORATION.
All rights reserved. Printed in Thailand
<KYTZX> <11L00000> <CRB3851-A/N> EU

Destination Menu

Touch Destination on the “Top Menu” screen.
1 Searches for a location by
address
2 Calculates the route to your
home
3 Searches for a place such as
stores, restaurants, and
other facilities (Points Of
Interest – POI) in the data-
base
4 Searches for POIs by using
the data on the SD memory
card
5 Stores and selects your
favourite locations
6 Returns to the previous
screen
7 Selects a previously routed
destination
8 Searches for a location by
coordinates
9 Cancels your current route
guidance
a Displays the current route
information
b Displays traffic information
5 7 b
3
a
1 2 4

Basic items on the map

1 Name of the street to be
used (or next guidance point)
2 Current time
3 Estimated time of arrival
(default)
4 Current route
5 Current position
6 Street name that your vehicle
is travelling along
7 Eco-Meter
8 Map control
9 Next direction of travel
Dragging the map
allows scrolling.
1
8
5
4
3
2
6
9
AV operation screenDestination Menu Phone Menu
Top Menu (Classic Menu)
Shortcut Menu
7
1 button
Press briefly to activate voice
operation.
Press and hold to mute the
AV (Audio and Video) source.
2 VOL (+/–) button
Press to adjust the AV source
volume.
3 HOME button
Press to display the “Top
Menu” screen.
4 MODE button
Press to switch between the
map screen and the AV oper-
ation screen.
5 TRK (/) button
6 h button
Press to display the
Monitor Setupscreen.
NAVIGATION AV SYSTEM

AVIC-F40BT

1 2 3 4 5 6
986

View the manual for the Pioneer AVIC-F40BT here, for free. This manual comes under the category navigators and has been rated by 3 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the Pioneer AVIC-F40BT or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 3
R
RafałFebruary 23, 2023

Hello there. I have a Pioneer AVIC-F40BT radio. I have a problem because nothing can be done in the menu, nothing lights up, and I cannot access ANY settings. What could be the cause?

Hello there. I have a Pioneer AVIC-F40BT radio. I have a problem because nothing can be done in the menu, nothing lights up, ...
zoom-in
View photo
This message has been automatically translated
1 comment
Z
ZakApril 30, 2024

@Rafał Bonjour même problème pour moi si tu as la solution je suis preneur merci beaucoup

J
John NixonApril 26, 2023

Hi My Avic F40BT is not keeping the pre set stations but my Bluetooth is ok and my sat nav remembers home address many thanks john

P
PetaApril 7, 2021

Hi my pioneer AVIC-F40BT mode and home button won't work. Everything else works but those buttons

General
BrandPioneer
ModelAVIC-F40BT | AVIC-F40BT
Productnavigator
EAN4988028156441
LanguageEnglish
FiletypeUser manual (PDF), Installation Guide (PDF)
GPS type
Marine (chartplotters, sounders)No
Sport (fitness, running)No
Outdoor (hiking, trekking)No
Geocaching (GPS stash hunt)No
AutoYes
AviationNo
No
TruckNo
Camper/CaravanNo
BicycleNo
GolfNo
Navigation
Traffic Message Channel (TMC)Yes
Live service-
Voice commandsYes
3D landmarksYes
Languages supportCZE, DAN, DEU, DUT, ENG, ESP, GRE, HUN, ITA, POL, POR, SWE, TUR
Live Traffic Message Channel (TMC)No
Technical details
Eco RoutesYes
Design
Form factorFixed
Product colorBlack
Interface typeTouch Screen
DIN size2 DIN
Removable front panelYes
Map
Map coverage-
Maps includedYes
Voice mapsYes
Map view options3D
Display
TouchscreenYes
Display diagonal7 "
WidescreenYes
Display resolution1440 x 234 pixels
Placement supportedHorizontal
Memory
Storage media typeFlash
Compatible memory cardsSD
Included memory card size4 GB
HDD capacity4 GB
Performance
Image formats supportedJPG
Audio formats supportedAAC, MP3
Video formats supportedH.261, H.264, MPEG4, WMV
World travel clockYes
Alarm clockYes
Anti-theft functionYes
Speed controlled volumeYes
MP3-playerYes
Text-to-speech message readerYes
CD playerYes
DVD playerYes
Video playbackYes
Built-in speaker(s)-
Built-in cameraYes
Network
BluetoothYes
Bluetooth version2.0+EDR
Ports & interfaces
USB 2.0 ports quantity1
AV inputYes
Weight & dimensions
Weight- g
Radio
Supported radio bandsAM, FM
Power
Battery technology-
Power source typeUSB
Power supply15 W
Packaging content
Cables includedUSB
AC adapter includedYes
Handheld remote controlYes
Quick start guideYes
Other features
AC adapter output voltage3.7 V
Wireless connectionYes
Built-in capabilityYes
Radio tuner integratedYes
Storage capacity4096 MB
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer AVIC-F40BT below.

What is the weight of the Pioneer AVIC-F40BT?

The Pioneer AVIC-F40BT has a weight of - g.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

Can I update the maps of my navigation system?

With most navigation systems it is possible to update maps. Most brands periodically update the maps.

What is the screen size of the Pioneer AVIC-F40BT?

The screen size of the Pioneer AVIC-F40BT is 7 ".

What is the screen resolution of the display of the Pioneer AVIC-F40BT?

The screen resolution of the Pioneer AVIC-F40BT is 1440 x 234 pixels.

Does the Pioneer AVIC-F40BT have marine capabilities?

No, the Pioneer AVIC-F40BT does not have marine capabilities.

Can the Pioneer AVIC-F40BT be used for sport activities like fitness or running?

No, the Pioneer AVIC-F40BT is not designed for sport activities like fitness or running.

Is the Pioneer AVIC-F40BT suitable for outdoor activities like hiking or trekking?

No, the Pioneer AVIC-F40BT is not suitable for outdoor activities like hiking or trekking.

Does the Pioneer AVIC-F40BT support traffic message channel (TMC)?

Yes, the Pioneer AVIC-F40BT supports traffic message channel (TMC).

Does the Pioneer AVIC-F40BT have voice commands and 3D landmarks?

Yes, the Pioneer AVIC-F40BT has voice commands and 3D landmarks.

How do I power on the Pioneer AVIC-F40BT navigator?

To power on the Pioneer AVIC-F40BT navigator, follow these steps: 1. Locate the power button on the device. It is usually labeled with a power symbol (a circle with a vertical line). 2. Press and hold the power button for a few seconds until the device powers on. 3. Once the device is powered on, you will see the startup screen or the main menu of the navigator. Make sure that the device is connected to a power source, such as a car's power outlet or a USB charger, if it is not turning on. Also, check if the power button is functioning properly and not stuck. If you are still experiencing issues with powering on the Pioneer AVIC-F40BT navigator, it is recommended to refer to the Operation Manual for further troubleshooting steps or contact Pioneer customer support for assistance.

Why is the Pioneer AVIC-F40BT navigator not responding to button presses?

If the Pioneer AVIC-F40BT navigator is not responding to button presses, you can try the following troubleshooting steps: 1. Check the power connection: Ensure that the navigator is properly connected to a power source and that it has sufficient power. If the battery is low, connect the navigator to a power outlet or charge it using a USB charger. 2. Restart the navigator: Press and hold the power button for a few seconds to turn off the navigator. Wait for a few seconds, then press the power button again to turn it back on. This can help reset any temporary software issues. 3. Check for firmware updates: Visit the Pioneer website and check if there are any available firmware updates for the AVIC-F40BT navigator. Updating the firmware can resolve software bugs and improve performance. 4. Perform a factory reset: If the issue persists, you can try performing a factory reset on the navigator. Please note that this will erase all your saved settings and data, so make sure to back up any important information before proceeding. Refer to the Operation Manual for instructions on how to perform a factory reset. If the problem still persists after trying these troubleshooting steps, it is recommended to contact Pioneer customer support for further assistance.

How do I enter an address to search for a destination on the Pioneer AVIC-F40BT navigator?

To enter an address and search for a destination on the Pioneer AVIC-F40BT navigator, follow these steps: 1. From the main menu, touch "Destination" to access the destination menu. 2. On the destination menu screen, select "Address" to search for a location by address. 3. Choose the country where the destination is located. 4. Enter the information for the address you want to set as the destination. You may need to input the street name, house number, city, and other relevant details. 5. After entering the address information, touch "OK" to initiate the search. 6. The navigator will search for the destination based on the entered address. 7. Once the search is complete, the route confirmation screen will appear, showing the calculated route to the destination. 8. Review the route information and touch "OK" to confirm and start the navigation guidance. If the Pioneer AVIC-F40BT navigator is not finding any search results for the entered address, double-check the address details for accuracy and ensure that the map data for the desired country is installed on the device.

Why is the Pioneer AVIC-F40BT navigator not finding any search results for my destination address?

The Pioneer AVIC-F40BT navigator may not be finding any search results for your destination address due to the following reasons: 1. Incorrect address input: Double-check the address details you entered to ensure they are accurate. Make sure you have entered the correct street name, house number, city, and other relevant information. 2. Map data limitations: The navigator relies on map data to search for destinations. Ensure that the map data for the desired country or region is installed on the device. If not, you may need to update or install the appropriate map data. 3. Limited search coverage: The navigator's database may not have comprehensive coverage for all locations. It is possible that the specific address you are searching for is not included in the database. In such cases, try using alternative search methods, such as searching by points of interest or coordinates. 4. Software or firmware issues: If none of the above reasons apply, there may be software or firmware issues affecting the search functionality. Check for any available software updates or perform a system reset to resolve any potential software-related issues. If the problem persists, it is recommended to consult the Pioneer customer support for further assistance.

How do I access the destination menu on the Pioneer AVIC-F40BT navigator?

To access the destination menu on the Pioneer AVIC-F40BT navigator, follow these steps: 1. From the main screen or home screen of the navigator, locate and tap on the "Destination" option. This option is usually represented by an icon or labeled as "Destination" on the screen. 2. By tapping on the "Destination" option, it will open the destination menu. This menu provides various options for setting and managing your destinations. 3. Once the destination menu is open, you can explore the available options and select the desired function. These options may include searching for a destination by address, points of interest, recent destinations, saved locations, or coordinates. 4. Use the touchscreen or physical buttons, if available, to navigate through the destination menu and select the desired option. 5. Depending on the selected option, you may need to input additional information such as the address, name of the point of interest, or coordinates to set your destination. By following these steps, you will be able to access the destination menu on the Pioneer AVIC-F40BT navigator and utilize its various features for setting and managing your destinations.

Why is the destination menu not displaying on the Pioneer AVIC-F40BT navigator?

The destination menu may not be displaying on the Pioneer AVIC-F40BT navigator due to the following reasons: 1. Incorrect navigation mode: Ensure that you are in the correct navigation mode. If you are currently in a different mode, such as the AV operation mode, switch to the navigation mode by pressing the "MODE" button or selecting the navigation option from the main menu. 2. Software or firmware issues: Check if there are any available software updates for the navigator. Updating the software can resolve any potential issues that may be causing the destination menu not to display. You can visit the Pioneer website to check for updates or contact Pioneer customer support for assistance. 3. System reset: If the issue persists, try performing a system reset on the navigator. This can help reset any temporary software glitches. Refer to the Operation Manual for instructions on how to perform a system reset. If none of these steps resolve the issue, it is recommended to contact Pioneer customer support for further assistance.

How do I control the AV system on the Pioneer AVIC-F40BT navigator?

To control the AV system on the Pioneer AVIC-F40BT navigator, follow these steps: 1. From the main screen or home screen of the navigator, locate and tap on the "AV" or "AV System" option. This option is usually represented by an icon or labeled as "AV" on the screen. 2. By tapping on the "AV" option, it will open the AV operation screen. This screen allows you to control various audio and video functions of the navigator. 3. On the AV operation screen, you can use the touchscreen or physical buttons, if available, to navigate through the different options and settings. These options may include controlling the volume, selecting audio sources (such as FM radio or iPod), adjusting audio settings (such as bass and treble), and managing media playback. 4. Use the touchscreen or physical buttons to select the desired option or setting. For example, you can tap on the FM radio option to listen to radio stations, or tap on the iPod option to control and play music from your connected iPod. By following these steps, you will be able to control the AV system on the Pioneer AVIC-F40BT navigator and enjoy its audio and video features.

Why is the AV operation screen not showing up on the Pioneer AVIC-F40BT navigator?

The AV operation screen may not be showing up on the Pioneer AVIC-F40BT navigator due to the following reasons: 1. Incorrect mode selection: Ensure that you are in the correct mode to access the AV operation screen. If you are currently in the navigation mode or another mode, switch to the AV mode by pressing the "MODE" button or selecting the AV option from the main menu. 2. Connection issues: Check the connections between the navigator and the AV system components, such as speakers, amplifier, or external devices. Ensure that all cables are securely connected and that the devices are powered on. 3. Software or firmware issues: Verify if there are any available software updates for the navigator. Updating the software can resolve any potential issues that may be affecting the AV operation screen. Visit the Pioneer website to check for updates or contact Pioneer customer support for assistance. 4. System reset: If the issue persists, try performing a system reset on the navigator. This can help reset any temporary software glitches. Refer to the Operation Manual for instructions on how to perform a system reset. If none of these steps resolve the issue, it is recommended to contact Pioneer customer support for further assistance.

How do I pair my phone with the Pioneer AVIC-F40BT navigator?

To pair your phone with the Pioneer AVIC-F40BT navigator, follow these steps: 1. Activate the Bluetooth function on your phone. 2. From the main screen or home screen of the navigator, tap on "Settings" ➡️ "Bluetooth Settings". 3. On the Bluetooth Settings screen, tap on "Bluetooth On/Off" to select "On". 4. Tap on "Registration" to start the pairing process. 5. The navigator will search for nearby devices and display a list of available devices. 6. Locate your phone on the list and tap on it to select it. 7. Enter the PIN code from your phone when prompted. The default PIN code is usually 1111. 8. Once the pairing is successful, a message will appear on the screen. To transfer the phone book from your phone to the navigator, follow these additional steps: 1. Connect your mobile phone to the navigator. 2. From the main screen or home screen of the navigator, tap on "Phone Menu" ➡️ "Contacts Transfer". 3. Follow the on-screen instructions and operate your mobile phone to transfer the phone book entries. 4. When the data transfer is finished, a message will appear on the screen. By following these steps, you will be able to pair your phone with the Pioneer AVIC-F40BT navigator and transfer your phone book entries for convenient access while driving.

Why is the phone book not transferring to the Pioneer AVIC-F40BT navigator after pairing?

The phone book may not be transferring to the Pioneer AVIC-F40BT navigator after pairing due to the following reasons: 1. Incompatible phone book format: Ensure that the phone book on your mobile phone is compatible with the AVIC-F40BT navigator. Some phone book formats may not be supported by the navigator, resulting in the inability to transfer the contacts. 2. Phone book access permission: Check if you have granted the necessary permissions on your mobile phone to allow the transfer of the phone book. Some phones require explicit permission to share contacts with external devices. 3. Phone compatibility: Verify if your mobile phone is compatible with the AVIC-F40BT navigator for phone book transfer. Compatibility can vary depending on the phone model, operating system, and Bluetooth version. 4. Phone book size: If the phone book is too large, it may exceed the storage capacity of the navigator. In such cases, try transferring a smaller subset of contacts or reducing the size of the phone book on your mobile phone. If the issue persists, it is recommended to consult the Pioneer customer support or refer to the Operation Manual for further troubleshooting steps specific to the AVIC-F40BT navigator.

Is the manual of the Pioneer AVIC-F40BT available in English?

Yes, the manual of the Pioneer AVIC-F40BT is available in English .

Is your question not listed? Ask your question here

No results