Pioneer AVIC-5201NEX manual

Pioneer AVIC-5201NEX
7.5 · 1
PDF manual
 · 88 pages
English
manualPioneer AVIC-5201NEX
61
The image quality may deteriorate depending on the usage
environment, such as at night or in dark surroundings.
1 Park your vehicle in a safe place and apply the
parking brake.
2 Using packing tape or similar, place markings
as follows.
Rear bumper
25 cm
(9-7/8 in.)
25 cm
(9-7/8 in.)
50 cm (1 ft. 8 in.)
2 m (6 ft. 7 in.)
MarkingsMarkings
3 Display the “System” setting screen.
Refer to Displaying the “System” setting screen on page
59
4 Touch [Camera settings].
5 Touch [Parking Assist Guide Adjust].
6 Set the guidelines by dragging the four points.
Adjust the guidelines so that the guidelines can be overlaid to
the markings
p Touch
/ / / / / to adjust the guidelines if
necessary. Touch [Default] to reset the settings.

Setting the second camera

You can view images of the second camera (a front camera etc.)
on the screen of this product.
Setting the second camera activation
The default setting is “Off”.
p This function is synchronized with “AV Input” setting.
1 Display the “System” setting screen.
Refer to Displaying the “System” setting screen on page
59
2 Touch [Camera settings].
3 Touch [2nd Camera Input] to switch “On” or
Off”.
Setting the reversed image
The default setting is “Off”.
p This setting is available only when you stop your vehicle in a
safe place and apply the parking brake.
p This function is available when “AV Input” is set to
Camera” or “2nd Camera Input” is set to “On”.
1 Display the “System” setting screen.
Refer to Displaying the “System” setting screen on page
59
2 Touch [Camera settings].
3 Touch [2nd Camera: Reverse video] to switch
On” or “Off”.

Setting the camera for Camera

View mode

To display Camera View at all times, “Camera View” needs to be
set to “On”. (The same mode is turned on when
is touched
on the camera view screen. The setting value is synchronized.)
The default setting is “Off”.
p To set the rear view camera as the camera for Camera View
mode, set “Back Camera Input” to “On”.
Refer to Setting rear view camera activation on page 60
p When using the second camera, set “AV Input” to
Camera” or “2nd Camera Input” to “On” (both settings are
synchronized).
Refer to Setting the second camera on page 61
1 Display the “System” setting screen.
Refer to Displaying the “System” setting screen on page
59
2 Touch [Camera settings].
3 Touch [Camera View] to switch “On” or “Off”.
p You can also turn this function on by touching [Camera
View] on the AV source selection screen or in the source
list.

Setting the demo mode

The default setting is “On”.
1 Display the “System” setting screen.
Refer to Displaying the “System” setting screen on page
59
2 Touch [Demo Mode] to switch “On” or “Off”.

Selecting the system language

p If the embedded language and the selected language setting
are not the same, text information may not display properly.
p Some characters may not be displayed properly.
1 Display the “System” setting screen.
Refer to Displaying the “System” setting screen on page
59
2 Touch [System Language].
3 Touch the language.

Setting the keyboard language

with the application for iPhone

You can use the keyboard in AppRadio Mode by setting the
language of the keyboard for iPhone.
p This function is only available in AppRadio Mode on the
iPhone.
1 Display the “System” setting screen.
Refer to Displaying the “System” setting screen on page
59
2 Touch [Keyboard].
3 Touch the language.

Adjusting the response posi-

tions of the touch panel (touch

panel calibration)

If you feel that the touch panel keys on the screen deviate from
the actual positions that respond to your touch, adjust the
response positions of the touch panel screen.
p This setting is available only when you stop your vehicle in a
safe place and apply the parking brake.
p Do not use sharp pointed tools such as a ballpoint or
mechanical pen, which could damage the screen.
p Do not turn off the engine while saving the adjusted position
data.
1 Display the “System” setting screen.
Refer to Displaying the “System” setting screen on page
59
2 Touch [Touch Panel Calibration].

< CRB5005-A >

System settings

View the manual for the Pioneer AVIC-5201NEX here, for free. This manual comes under the category navigators and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Pioneer AVIC-5201NEX or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 10
B
Barry DavidsonMarch 16, 2023

I bought a motorhome with the Pioneer-5201NEX and previous owner did not remember the password for this unit. I want to eject a CD in the player and it wants the password. How do I get into it and reset the password?

M
maryOctober 7, 2023

my iphone pairs automatically with my unit but no audio is coming out but it was working fine and then the audio stopped--i troubleshooted this issue unsuccessfully with a pioneer tech.... could this possibly be due to the need for a firmware update? im looking for the usb port and cant find it to insert my flashdrive...help!!

E
Earl BurgeOctober 27, 2022

My Pioneer AVIC-5201NEX won't power on. I have checked the vehicle's radio fuse. Whatever can I check

B
BrianSeptember 11, 2023

Purchased a truck with this head unit in it (pioneer avic-5201nex) and the previous owner had an amp and subwoofers hooked up ,which had been removed. The radio works fine but no sound will play through the door speakers. I'm thinking it is possibly a setting that is turned off, but not sure, need help figuring this out

M
mary codaOctober 7, 2023

where is the usb port so that i can update firmware with a flash drive?

C
CAREY CRAFTNovember 5, 2023

How to retrieve out reset my password

J
Jose PerezNovember 26, 2023

How to turn off repeat track option

M
mike pottsMarch 16, 2023

setting time and date on my AVIC5201 radio

1 comment
J
JimNovember 12, 2023

How do you change the time

R
Ron Skibins srJuly 12, 2023

how do I change the language

C
Collin BradenOctober 24, 2022

Am I suppose to have a app downloaded

The Pioneer AVIC-5201NEX is a car navigator that offers advanced features and functionality for drivers. Designed to provide accurate navigation and convenience on the road, this product is suitable for various vehicles. One notable feature of the AVIC-5201NEX is its built-in GPS navigation system. It utilizes up-to-date maps and provides turn-by-turn directions, allowing drivers to reach their destinations efficiently. Additionally, the device supports voice guidance, which enhances safety by minimizing the need to look at the screen while driving. Furthermore, the AVIC-5201NEX boasts a large touchscreen display, which offers sharp and clear visuals. This makes it easier for users to interact with the device and access its various functions. The touchscreen is also responsive, ensuring smooth operation without delays. Another advantage of this product is its compatibility with Apple CarPlay and Android Auto. This allows users to integrate their smartphones seamlessly, enabling them to access their favorite apps, make calls, and send messages hands-free. The AVIC-5201NEX also supports Bluetooth technology, enabling users to listen to music and stream audio wirelessly. The AVIC-5201NEX is equipped with multiple connectivity options, including USB and HDMI ports, providing flexibility for users to connect external devices and accessories. Additionally, this navigator supports dual-zone audio and video, allowing passengers to enjoy their own entertainment while the driver follows the navigation instructions. In conclusion, the Pioneer AVIC-5201NEX is a feature-rich car navigator that offers accurate navigation, convenience, and seamless smartphone integration. With its large touchscreen display and various connectivity options, this device provides an enhanced driving experience.

General
BrandPioneer
ModelAVIC-5201NEX
Productnavigator
LanguageEnglish
FiletypeUser manual (PDF), Installation Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer AVIC-5201NEX below.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

Can I update the maps of my navigation system?

With most navigation systems it is possible to update maps. Most brands periodically update the maps.

How do I pair my smartphone with the Pioneer AVIC-5201NEX?

To pair your smartphone with the navigator, go to the Bluetooth settings on both your phone and the AVIC-5201NEX. Enable Bluetooth on both devices, search for available devices on the Pioneer unit, and select your smartphone from the list. Follow the on-screen prompts to complete the pairing process.

What is the recommended way to update the firmware of the Pioneer AVIC-5201NEX?

To update the firmware of your navigator, you need to download the latest firmware from the official Pioneer website onto a USB drive. Insert the USB drive into the USB port on the AVIC-5201NEX, go to the System Settings menu, select "Update Firmware," and follow the on-screen instructions to complete the firmware update.

How do I adjust the audio settings on the Pioneer AVIC-5201NEX?

To adjust the audio settings, go to the Audio menu on the navigator. From there, you can control the equalizer settings, balance, fade, subwoofer levels, and more. Explore the Audio menu to customize the sound output according to your preferences.

What are the steps to perform a factory reset on the Pioneer AVIC-5201NEX?

If you want to perform a factory reset on the navigator, go to the System Settings menu, select "Initial Settings," and then choose "Factory Reset." Confirm your selection, and the AVIC-5201NEX will reset all settings and configurations to their original factory default.

How can I customize the navigation settings on the Pioneer AVIC-5201NEX?

You can customize the navigation settings by accessing the Navigation menu on the unit. From there, you can adjust the voice guidance volume, choose your preferred measurement units (e.g., miles or kilometers), configure route preference options, and more. Take some time to explore the Navigation menu and tailor the settings to your needs.

Is the manual of the Pioneer AVIC-5201NEX available in English?

Yes, the manual of the Pioneer AVIC-5201NEX is available in English .

Is your question not listed? Ask your question here

No results