Pioneer AVIC-5201NEX manual

Pioneer AVIC-5201NEX
7.5 · 1
PDF manual
 · 88 pages
English
manualPioneer AVIC-5201NEX
46
Displays the launcher
application screen.
Displays the previous screen.
Displays the menu screen.
Displays the current source.
p Press the button twice to hide the App control side bar.
Press the
button twice again to display it again.
p
and are not available depending on the type of
device.
WARNING
Certain uses of an iPhone or a smartphone may not be legal
while driving in your jurisdiction, so you must be aware of and
obey any such restrictions.
If in doubt as to a particular function, only perform it while the
car is parked.
No feature should be used unless it is safe to do so under the
driving conditions you are experiencing.

AppRadio Mode Compatibility

p AppRadio Mode is only available on an iPhone.
iPhone models
iPhone 4, 4s, 5, 5c, 5s, 6, 6 Plus
iPod touch (4th, 5th generation)
Smartphone (Android) models
For details about Android device compatibility with this
product, refer to the information on our website.

Using AppRadio Mode

You can control applications for an iPhone or a smartphone
directly from the screen (AppRadio Mode).
In AppRadio Mode, you can operate applications with finger
gestures such as tapping, dragging, scrolling or flicking on the
screen of this product.
Important
To use AppRadio Mode, install the AppRadio app on the
iPhone or smartphone in advance. For details about the
AppRadio app, visit the following site:
For U.S.A.
http://www.pioneerelectronics.com/AppRadioMode
For Canada
http://www.pioneerelectronics.ca/AppRadioMode
Be sure to read Using app-based connected content before
you perform this operation.
Refer to Using app-based connected content on page 84
Content and functionality of compatible applications are
the responsibility of the App providers.
In AppRadio Mode, usage is limited while driving, with
availability of functions and content determined by the
App providers.
AppRadio Mode allows access to applications other
than those listed, subject to limitations while driving.
PIONEER IS NOT RESPONSIBLE AND DISCLAIMS
LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS
AND CONTENT, INCLUDING WITHOUT LIMITATION ANY
INACCURACIES OR INCOMPLETE INFORMATION.
p In this chapter, iPhone and iPod touch will be referred to as
“iPhone”.
p The compatible finger gestures vary depending on the
application for an iPhone or a smartphone.
p Even though an application is not compatible with
AppRadio Mode, depending on the application an image
may be displayed. But you can not operate the application.

Starting procedure

When connecting an iPhone or a smartphone to this product,
select the method for connecting your device. Settings are
required according to the connected device.
Refer to Setup for iPod / iPhone or smartphone on page 33
p Touch the desired application icon after the AppRadio app is
launched.
After the desired application is launched, the application
operation screen appears.
p If you connect your device while an AppRadio Mode-
compatible application is already running, the application
operation screen will appear on this product.
p Press the
button to go back to the top menu screen.
For iPhone users
p When you use an iPhone with a Lightning connector, con-
nect the iPhone to this product via Bluetooth wireless
technology and unlock the iPhone in advance.
Refer to Registering your Bluetooth devices on page 30
1 Connect your iPhone.
Refer to the Installation Manual.
2 Press the button.3 Touch [APPS].
p When you use an iPhone with a 30-pin connector, messages
appear on the screen of this product and your iPhone.
Proceed to the next step.
p When you use an iPhone with a Lightning connector, the
AppRadio app is launched, and the AppRadio Mode
screen (Application menu screen) appears after this step. In
such a case, the following steps are not required.
4 Use your iPhone to launch the application.
The AppRadio app is launched.
5 Touch [OK] on the screen of this product.
The AppRadio Mode screen (Application menu screen)
appears.

Using the keyboard (for iPhone

users)

When you tap the text input area of an application for iPhone,
a keyboard will be displayed on the screen. You can input the
desired text directly from this product.
p This function may not be available depending on your
iPhone.
p This function is only available in AppRadio Mode on the
iPhone.
CAUTION
For your safety, the keyboard functionality is only available
when the vehicle is stopped and the parking brake is engaged.
1 Set the keyboard language.

AppRadio Mode

< CRB5005-A >

AppRadio Mode

View the manual for the Pioneer AVIC-5201NEX here, for free. This manual comes under the category navigators and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Pioneer AVIC-5201NEX or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 10
B
Barry DavidsonMarch 16, 2023

I bought a motorhome with the Pioneer-5201NEX and previous owner did not remember the password for this unit. I want to eject a CD in the player and it wants the password. How do I get into it and reset the password?

M
maryOctober 7, 2023

my iphone pairs automatically with my unit but no audio is coming out but it was working fine and then the audio stopped--i troubleshooted this issue unsuccessfully with a pioneer tech.... could this possibly be due to the need for a firmware update? im looking for the usb port and cant find it to insert my flashdrive...help!!

E
Earl BurgeOctober 27, 2022

My Pioneer AVIC-5201NEX won't power on. I have checked the vehicle's radio fuse. Whatever can I check

B
BrianSeptember 11, 2023

Purchased a truck with this head unit in it (pioneer avic-5201nex) and the previous owner had an amp and subwoofers hooked up ,which had been removed. The radio works fine but no sound will play through the door speakers. I'm thinking it is possibly a setting that is turned off, but not sure, need help figuring this out

M
mary codaOctober 7, 2023

where is the usb port so that i can update firmware with a flash drive?

C
CAREY CRAFTNovember 5, 2023

How to retrieve out reset my password

J
Jose PerezNovember 26, 2023

How to turn off repeat track option

M
mike pottsMarch 16, 2023

setting time and date on my AVIC5201 radio

1 comment
J
JimNovember 12, 2023

How do you change the time

R
Ron Skibins srJuly 12, 2023

how do I change the language

C
Collin BradenOctober 24, 2022

Am I suppose to have a app downloaded

The Pioneer AVIC-5201NEX is a car navigator that offers advanced features and functionality for drivers. Designed to provide accurate navigation and convenience on the road, this product is suitable for various vehicles. One notable feature of the AVIC-5201NEX is its built-in GPS navigation system. It utilizes up-to-date maps and provides turn-by-turn directions, allowing drivers to reach their destinations efficiently. Additionally, the device supports voice guidance, which enhances safety by minimizing the need to look at the screen while driving. Furthermore, the AVIC-5201NEX boasts a large touchscreen display, which offers sharp and clear visuals. This makes it easier for users to interact with the device and access its various functions. The touchscreen is also responsive, ensuring smooth operation without delays. Another advantage of this product is its compatibility with Apple CarPlay and Android Auto. This allows users to integrate their smartphones seamlessly, enabling them to access their favorite apps, make calls, and send messages hands-free. The AVIC-5201NEX also supports Bluetooth technology, enabling users to listen to music and stream audio wirelessly. The AVIC-5201NEX is equipped with multiple connectivity options, including USB and HDMI ports, providing flexibility for users to connect external devices and accessories. Additionally, this navigator supports dual-zone audio and video, allowing passengers to enjoy their own entertainment while the driver follows the navigation instructions. In conclusion, the Pioneer AVIC-5201NEX is a feature-rich car navigator that offers accurate navigation, convenience, and seamless smartphone integration. With its large touchscreen display and various connectivity options, this device provides an enhanced driving experience.

General
BrandPioneer
ModelAVIC-5201NEX
Productnavigator
LanguageEnglish
FiletypeUser manual (PDF), Installation Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer AVIC-5201NEX below.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

Can I update the maps of my navigation system?

With most navigation systems it is possible to update maps. Most brands periodically update the maps.

How do I pair my smartphone with the Pioneer AVIC-5201NEX?

To pair your smartphone with the navigator, go to the Bluetooth settings on both your phone and the AVIC-5201NEX. Enable Bluetooth on both devices, search for available devices on the Pioneer unit, and select your smartphone from the list. Follow the on-screen prompts to complete the pairing process.

What is the recommended way to update the firmware of the Pioneer AVIC-5201NEX?

To update the firmware of your navigator, you need to download the latest firmware from the official Pioneer website onto a USB drive. Insert the USB drive into the USB port on the AVIC-5201NEX, go to the System Settings menu, select "Update Firmware," and follow the on-screen instructions to complete the firmware update.

How do I adjust the audio settings on the Pioneer AVIC-5201NEX?

To adjust the audio settings, go to the Audio menu on the navigator. From there, you can control the equalizer settings, balance, fade, subwoofer levels, and more. Explore the Audio menu to customize the sound output according to your preferences.

What are the steps to perform a factory reset on the Pioneer AVIC-5201NEX?

If you want to perform a factory reset on the navigator, go to the System Settings menu, select "Initial Settings," and then choose "Factory Reset." Confirm your selection, and the AVIC-5201NEX will reset all settings and configurations to their original factory default.

How can I customize the navigation settings on the Pioneer AVIC-5201NEX?

You can customize the navigation settings by accessing the Navigation menu on the unit. From there, you can adjust the voice guidance volume, choose your preferred measurement units (e.g., miles or kilometers), configure route preference options, and more. Take some time to explore the Navigation menu and tailor the settings to your needs.

Is the manual of the Pioneer AVIC-5201NEX available in English?

Yes, the manual of the Pioneer AVIC-5201NEX is available in English .

Is your question not listed? Ask your question here

No results