Pioneer AVH-295BT manual

Pioneer AVH-295BT
8.3 · 24
PDF manual
 · 144 pages
English
manualPioneer AVH-295BT
32
CAUTION
Secure all wiring with cable clamps or electrical tape.
Do not allow any bare wiring to remain exposed.
Do not directly connect the yellow lead of this product
to the vehicle battery. If the lead is directly connected
to the battery, engine vibration may eventually cause
the insulation to fail at the point where the wire
passes from the passenger compartment into the
engine compartment. If the yellow lead’s insulation
tears as a result of contact with metal parts, short-
circuiting can occur, resulting in considerable danger.
It is extremely dangerous to allow cables to become
wound around the steering column or gearstick. Be
sure to install this product, its cables, and wiring
away in such so that they will not obstruct or hinder
driving.
Make sure that the cables and wires will not interfere
with or become caught in any of the vehicle’s moving
parts, especially the steering wheel, gearstick,
handbrake, sliding seat tracks, doors, or any of the
vehicle’s controls.
Do not route wires where they will be exposed to
high temperatures. If the insulation heats up, wires
may become damaged, resulting in a short circuit or
malfunction and permanent damage to the product.
Do not shorten any leads. If you do, the protection
circuit (fuse holder, fuse resistor or filter, etc.) may
fail to work properly.
Never feed power to other electronic products by
cutting the insulation of the power supply lead of
this product and tapping into the lead. The current
capacity of the lead will be exceeded, causing
overheating.

Before installing this product

Use this unit with a 12-volt battery and negative earthing
only. Failure to do so may result in a fire or malfunction.
To avoid shorts in the electrical system, be sure to discon-
nect the (–) battery cable before installation.

To prevent damage

WARNING
Use speakers over 50 W (output value) and between
4Ωto8Ω(impedancevalue).Donotuse1Ωto3Ω
speakers for this unit.
The black cable is earth. When installing this unit or
power amp (sold separately), make sure to connect
the earth wire first. Ensure that the earth wire is
properly connected to metal parts of the car’s body.
The earth wire of the power amp and the one of this
unit or any other device must be connected to the car
separately with different screws. If the screw for the
earth wire loosens or falls out, it could result in fire
generation of smoke or malfunction.
Ground wire
Metal parts of car’
s body
POWER AMP
Other devices
(Another electr
onic
device in the car)
When replacing the fuse, be sure to only use a fuse of
the rating prescribed on this product.
This product cannot be installed in a vehicle without ACC
(accessory) position on the ignition switch.
A
C
C
O
N
S
T
A
R
T
O
F
F
O
N
S
T
A
R
T
O
F
F
ACC position No ACC position
To avoid short-circuiting, cover the disconnected lead with
insulating tape. It is especially important to insulate all
unused speaker leads, which if left uncovered may cause a
short circuit.
For connecting a power amp or other devices to this product,
refer to the manual for the product to be connected.

Notice for the blue/white lead

When the ignition switch is turned on (ACC ON), a control
signal is output through the blue/white lead. Connect to an
external power amp’s system remote control terminal, the
auto-aerial relay control terminal, or the aerial booster power
control terminal (max. 300 mA 12 V DC). The control signal is
output through the blue/white lead, even if the audio source
is switched off.

This product

1
2
345678
1 Microphone 3 m
(AVH-295BT)
2 This product
3 Aerial jack
4 Wired remote input
Hard-wired remote control adapter can be connected (sold
separately).
5 Power supply
6 Fuse (10 A)
7 Front output
8 Rear output or subwoofer output

< QRD3472-A >

Connection

View the manual for the Pioneer AVH-295BT here, for free. This manual comes under the category receivers and has been rated by 24 people with an average of a 8.3. This manual is available in the following languages: English. Do you have a question about the Pioneer AVH-295BT or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 8
M
MARIO VIÑALESNovember 19, 2021

I HAVE MY AVH-295BT STEREO AND I'M LISTENING TO MUSIC OR I HAVE A CALL AND SUDDENLY THE WORDS "DISABLE ALARM" APPEAR ON THE SCREEN ALONG WITH A RADIO STATION THAT IS PLAYING AT LOW VOLUME, AND SOMETIMES IT HAPPENS FOR A WHILE AND SOMETIMES SEVERAL TIMES ALREADY.

I HAVE MY AVH-295BT STEREO AND I'M LISTENING TO MUSIC OR I HAVE A CALL AND SUDDENLY THE WORDS "DISABLE ALARM" APPEAR ON THE S...
zoom-in
View photo
This message has been automatically translated
J
José HuertasMay 5, 2022

How to connect Android Auto on a Samsung Note Android to view Google Maps and Waze on this screen? Whether through Bluetooth or with a cable. Thank you.

How to connect Android Auto on a Samsung Note Android to view Google Maps and Waze on this screen? Whether through Bluetooth ...
zoom-in
View photo
This message has been automatically translated
N
NedalNovember 12, 2022

How to connect the device to steering wheel control panel? Is it functioning on steering wheel control?? My car is nissan Pathfinder 2006

How to connect the device to steering wheel control panel?

Is it functioning on steering wheel control??
My car is nissan...
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 19, 2023

To connect the Pioneer AVH-295BT receiver to the steering wheel control panel, follow these steps: 1. Display the "System" setting screen. 2. Touch [Steering Wheel Control]. 3. If you have a steering wheel control adapter for Pioneer users, select [With Adapter]. If not, select [No Adapter]. 4. Follow the on-screen instructions to register the function setting for each key manually.

This answer is automatically generated
A
AnneMay 19, 2023

How do I get maps onto to screen from Apple phone

M
M. Aseem August 8, 2023

How to connected phone for Bluetooth this setap

How to connected phone for Bluetooth this setap
zoom-in
View photo
H
HarrisMay 21, 2024

How to install filles in usb?

M
M. JamesOctober 30, 2022

How to clear the phone book in the device?

L
LitshaweJune 25, 2023

I can't find the bt option in my pioneer car radio mvh-295bt

The Pioneer AVH-295BT is a receiver designed to enhance in-car entertainment and connectivity. With its sleek and modern design, it seamlessly integrates into the dashboard of compatible vehicles. The receiver features a built-in Bluetooth module, allowing for wireless audio streaming and hands-free calling. This enables drivers to safely make and receive calls without taking their hands off the wheel. The AVH-295BT also supports a wide range of media playback options. It is equipped with a CD/DVD player, USB port, and AUX input, enabling users to play their favorite music from various sources. The receiver also has a 6.2-inch touchscreen display, providing users with an easy-to-use interface to control the receiver's functions and settings. In terms of sound quality, the Pioneer AVH-295BT is designed to deliver high-fidelity audio. It features a built-in amplifier, allowing for clear and powerful sound reproduction. Users can also customize the sound to their liking with the receiver's built-in equalizer and audio settings. Furthermore, the AVH-295BT offers convenient navigation features. It is compatible with certain navigation apps, allowing users to receive real-time directions and traffic updates directly on the receiver's display. This eliminates the need for separate GPS devices and provides a safer driving experience. In conclusion, the Pioneer AVH-295BT is a versatile and user-friendly receiver that enhances the in-car entertainment and connectivity experience. With its Bluetooth connectivity, media playback options, and navigation features, it provides drivers with a convenient and enjoyable driving experience.

General
BrandPioneer
ModelAVH-295BT | AVH-295BT
Productreceiver
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer AVH-295BT below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How do I connect my phone to the Pioneer AVH-295BT receiver?

To connect your phone, go to the "Settings" menu on the receiver, select "Bluetooth" and enable it. Then, on your phone, go to the Bluetooth settings and search for available devices. Once you see “Pioneer AVH-295BT” on your phone, select it to establish the Bluetooth connection.

How can I adjust the sound settings on the receiver?

To adjust the sound settings, go to the "Audio" or "Sound" menu on the receiver. From there, you can modify settings such as equalizer presets, balance, fader, and loudness to customize your audio experience.

How do I set the clock on the Pioneer AVH-295BT?

To set the clock, navigate to the "Settings" menu on the receiver and select "Clock." You can then use the provided options to adjust the hours, minutes, and possibly the date if applicable.

How can I tune in to radio stations on the receiver?

To tune in to radio stations, choose the "Radio" or "FM" option on the receiver's main menu. Then, use the up and down arrows or the on-screen keypad to manually tune or search for available stations. You can also save your favorite stations by pressing and holding the desired preset buttons.

How can I play music from a USB drive or SD card?

To play music from a USB drive or SD card, make sure it is properly inserted into the corresponding ports on the receiver. Then, select the "Source" or "USB/SD" option on the main menu. You should be able to navigate through the files using the on-screen menu and play the desired music files.

Is the manual of the Pioneer AVH-295BT available in English?

Yes, the manual of the Pioneer AVH-295BT is available in English .

Is your question not listed? Ask your question here

No results