Phoenix UPS-BAT/LI-ION/24DC/120WH manual

Phoenix UPS-BAT/LI-ION/24DC/120WH
5.4 · 1
PDF manual
 · 66 pages
English
manualPhoenix UPS-BAT/LI-ION/24DC/120WH

9.1 Configuration stick usage

A configuration stick stores UPS configurations, i.e.complete parameter sets. Configurations
can be copied from the UPS to the stick and vice versa. This way, the stick can be used to
transfer configurations from one UPS to another.
NOTE
The configuration stick cannot be used, while the UPS runs in battery mode. The power
supply must be available.
The usage of configuration sticks is explained by the following steps:
1. Make sure that the used memory stick is already declared as configuration stick as
described in the topic Stick usage (see page 45).
2. To transfer parameters between the stick and the UPS, execute one of the following
steps:
To copy parameters from the stick to the QUINT-UPS push the "Stick -> UPS" button
for more than 2 seconds.
To copy parameters from the QUINT-UPS to the stick push the "UPS -> Stick" button
for more than 2 seconds.
3. Connect the configuration stick to the Data port of the UPS under consideration of the
plug direction.
The parameter transfer is started automatically and the progress is signalled by the
LEDs:
While data is transferred they flash red - yellow - green.
A successful tranfer completion is signalled by a permanent green LED.
A faulty tranfer completion is signalled by a permanent red LED.
4. Remove the stick from the Data port.
5. After copying a parameter set from an UPS to the stick you can "clone" this configuration
by plugging this stick into another UPS and copying the stored data from the stick into
this UPS.
UPS-CONF
46
PHOENIX CONTACT 104779_en_01

View the manual for the Phoenix UPS-BAT/LI-ION/24DC/120WH here, for free. This manual comes under the category power banks and has been rated by 1 people with an average of a 5.4. This manual is available in the following languages: English. Do you have a question about the Phoenix UPS-BAT/LI-ION/24DC/120WH or do you need help? Ask your question here

Need help?

Do you have a question about the Phoenix and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Phoenix UPS-BAT/LI-ION/24DC/120WH power bank is a reliable energy storage solution with a battery voltage of 24V and a battery capacity of 120 watt-hours. With dimensions of 135mm in width, 110mm in depth, and 202mm in height, this power bank is designed for easy installation and operation. Certified with an IP20 rating, this power bank is suitable for indoor use and offers continuous monitoring and intelligent management through communication with the QUINT UPS. The energy storage can be automatically detected, and tool-free switching during operation allows for quick installation. The QUINT UPS with IQ technology ensures that the energy storage is fully charged when it leaves the warehouse, providing peace of mind for users. With a focus on efficiency and convenience, the Phoenix UPS-BAT/LI-ION/24DC/120WH power bank offers a practical solution for powering various devices and equipment. In conclusion, the Phoenix UPS-BAT/LI-ION/24DC/120WH power bank is a versatile and efficient energy storage solution that prioritizes ease of use and reliability. With its compact design and intelligent management capabilities, this power bank is a valuable asset for both residential and commercial applications.

General
BrandPhoenix
ModelUPS-BAT/LI-ION/24DC/120WH | 2320351
Productpower bank
EAN4046356599054
LanguageEnglish
FiletypeUser manual (PDF)
Features
Battery technologyLithium-Ion (Li-Ion)
Battery voltage24 V
Battery capacity120 Wh
CertificationIP20
Battery capacity- mAh
Operational conditions
Operating temperature (T-T)-20 - 60 °C
Storage temperature (T-T)-40 - 65 °C
Operating temperature (T-T)-20 - 60 °C
Storage temperature (T-T)-40 - 65 °C
Weight & dimensions
Width135 mm
Depth110 mm
Height202 mm
Width135 mm
Depth110 mm
Height202 mm
Weight2900 g
Performance
Battery technologyLithium-Ion (Li-Ion)
Battery capacity120 Wh
Battery capacity- mAh
Charging sourceDC
Fast charging-
Number of charging cycles-
Country of originChina
Design
CertificationEN 60950-1/VDE 0805 (SELV) \nEN 50178/VDE 0160 (PELV)\nUL/C-UL\nUL ANSI/ISA-12.12.01
Number of simultaneously connected devices (max)-
Product colorGray
Housing material-
Charger compatibility-
International Protection (IP) codeIP20
WaterproofNo
Built-in displayNo
Power
Output voltage24 V
Input voltage24 V
Output current30 A
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Phoenix UPS-BAT/LI-ION/24DC/120WH below.

What is the weight of the Phoenix UPS-BAT/LI-ION/24DC/120WH?

The Phoenix UPS-BAT/LI-ION/24DC/120WH has a weight of 2900 g.

What certifications does the Phoenix UPS-BAT/LI-ION/24DC/120WH have?

The Phoenix UPS-BAT/LI-ION/24DC/120WH has the following certifications: EN 60950-1/VDE 0805 (SELV) \nEN 50178/VDE 0160 (PELV)\nUL/C-UL\nUL ANSI/ISA-12.12.01.

What is the height of the Phoenix UPS-BAT/LI-ION/24DC/120WH?

The Phoenix UPS-BAT/LI-ION/24DC/120WH has a height of 202 mm.

What is the width of the Phoenix UPS-BAT/LI-ION/24DC/120WH?

The Phoenix UPS-BAT/LI-ION/24DC/120WH has a width of 135 mm.

What is the depth of the Phoenix UPS-BAT/LI-ION/24DC/120WH?

The Phoenix UPS-BAT/LI-ION/24DC/120WH has a depth of 110 mm.

Is the manual of the Phoenix UPS-BAT/LI-ION/24DC/120WH available in English?

Yes, the manual of the Phoenix UPS-BAT/LI-ION/24DC/120WH is available in English .

Is your question not listed? Ask your question here

No results