Philips XL4902S manual

Philips XL4902S
6.6 · 1
PDF manual
 · 50 pages
English
manualPhilips XL4902S
26 EN

ECO+ mode

When the ECO+ mode is activated, it
eliminates the radiation of the handset and base
station in standby mode.
1 Select [Menu] > [Phone setup] > [ECO+
mode], then press [OK] to conrm.
2 Select [On]/[Off], and press [OK] to
conrm.
» The setting is saved.
» ECO+ is displayed in standby mode
after a while.
Note
Make sure that all the handsets registered to the base
station are XL490/XL495 in order to have the ECO+
feature functioning properly.
When ECO+ is activated, the standby time is reduced.
This is because in ECO+ mode the base station is not
transmitting any signal in standby mode; therefore the
handset needs to “listen” more frequently for signals
from the base station to detect incoming calls or other
requests from the base station. The time it takes for the
handset to access features like call setup, call log, paging,
and phonebook browsing is also delayed. The handset
will not alert you to link loss in case of power loss or
moving out of range.
The following table shows you the current
status of the handset screen with different ECO
mode and ECO+ mode settings.
ECO
mode
ECO+
mode
Handset icon display
[Off] [Off]
and are off.
[Off] [On]
is displayed only
after the ECO+ mode is
activated during standby
mode .
[On] [Off]
is displayed.
[On] [On]
is displayed and changed
to when the ECO+
mode is activated in
standby mode.

Name the handset

The name of the handset can be up to 14
characters. It is displayed on the handset screen
in standby mode.
1 Select [Menu] > [Phone setup] > [Phone
name], then press [OK] to conrm.

2 Enter or edit the name. To erase a

character, select [Clear].

3 Press [OK] to conrm.

» The setting is saved.

Set the date and time

For information, see 'Set the date and time (see
'Set the date and time' on page 9)'.

Set the display language

Note
This feature only applies to models with multiple-
language support.
Languages available vary from country to country.

1 Select [Menu] > [Phone setup] >

[Language], then press [OK] to conrm.

2 Select a language, then press [OK] to

conrm.
» The setting is saved.

Auto answer

When you activate the auto answer feature, you
can connect to the incoming call automatically
once you pick up the handset. When you
deactivate this feature, you have to press or
to answer the incoming call.
1 Select [Menu] > [Phone setup] > [Auto
answer], then select [OK] to conrm.

View the manual for the Philips XL4902S here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 6.6. This manual is available in the following languages: English. Do you have a question about the Philips XL4902S or do you need help? Ask your question here

Need help?

Do you have a question about the Philips and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
DeniseOctober 15, 2020

How to set up answering machine

The Philips XL4902S is a DECT telephone equipped with a range of features to enhance communication and convenience. Although intended for desk mounting, it provides the flexibility of being able to communicate with other handsets via its intercom function. Additionally, it has a maximum indoor range of 50 meters and an outdoor range of 300 meters, allowing for communication in various settings. The phone's ringer type is polyphonic, delivering a variety of tones to alert users to incoming calls. It is also compatible with the GAP standard, ensuring seamless integration and connectivity with other compatible devices. Designed with usability in mind, the XL4902S includes backlit buttons, making it easier to operate in low-light environments. An anti-slip grip further enhances handling and prevents accidental slips. For hands-free conversations, the phone features a speakerphone function. Additionally, the microphone can be muted, providing privacy options during calls. The XL4902S supports multi handset capability, allowing for the use of up to four handsets simultaneously. This Philips phone does not specifically cater to the elderly, as it lacks features typically associated with elderly phones, such as larger buttons or hearing aid compatibility. Overall, the Philips XL4902S offers a range of functions and features to meet the communication needs of users. Its durable construction, combined with its convenient intercom function and multiple handset capability, make it a versatile option for households and small offices alike.

General
BrandPhilips
ModelXL4902S | XL4902S/51
Productphone
EAN489518560624, 4895185606248, 4895185606255, 4895185606262
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)
Performance
TypeDECT telephone
Answering machineNo
IntercomYes
Maximum indoor range50 m
Maximum outdoor range300 m
Ringer typePolyphonic
GAP compatibleYes
Number of melodies10
Design
Product colorSilver
Mounting typeDesk
Elderly phoneNo
Backlight buttonsYes
Anti-slip gripYes
Phone features
SpeakerphoneYes
Microphone muteYes
Multi handset capability4
Paging functionYes
Phonebook capacity50 entries
Call management
Caller IDYes
Call log entries50
Call waitingYes
Redial list capacity20
Management features
Alarm clockYes
Volume controlDigital
PersonalizationMenu
Programmable hot keysYes
Display
Built-in displayYes
Backlight displayYes
Display number of colorsMonochrome
Backlight colorWhite
Display diagonal1.9 "
Ports & interfaces
Wireless connectionYes
Power
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Battery typeAAA
Talk time16 h
Standby time250 h
Battery technologyNickel-Metal Hydride (NiMH)
Battery capacity550 mAh
Battery recharge time8 h
Certificates
Specific absorption rate (SAR) value (EU)0.1 W/kg
Weight & dimensions
Weight692 g
Cable length1.8 m
Package width197 mm
Package depth102 mm
Package height157 mm
Package weight815 g
Packaging content
Base stationYes
Number of handsets included2
Other features
Clock/Date displayYes
Battery level indicatorYes
Charging sourceAC
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Philips XL4902S below.

What is the weight of the Philips XL4902S?

The Philips XL4902S has a weight of 692 g.

What is the screen size of the Philips XL4902S?

The screen size of the Philips XL4902S is 1.9 ".

How long does it take to charge the battery of the Philips XL4902S?

It takes 8 h to charge the battery of the Philips XL4902S.

How do I set up the date and time on my Philips XL4902S phone?

To set the date and time on your Philips XL4902S phone, go to the Settings menu, select Date & Time, and then manually enter the current date and time using the keypad.

How can I adjust the ringer volume on my Philips XL4902S phone?

To adjust the ringer volume on your Philips XL4902S phone, press the Volume Up or Volume Down buttons while the phone is not in use. This will increase or decrease the ringer volume respectively.

What steps should I follow to set up the voicemail on my Philips XL4902S phone?

To set up voicemail on your Philips XL4902S phone, press and hold the "Voicemail" button located on the phone's keypad. This will guide you through the process of setting up your voicemail box, including recording a personalized greeting.

How can I block unwanted calls on my Philips XL4902S phone?

To block unwanted calls on your Philips XL4902S phone, navigate to the Settings menu, select Call Settings, and then choose the Call Block option. From there, you can add specific numbers to the blocked list, preventing them from reaching your phone.

How do I transfer a call to another handset on my Philips XL4902S phone?

To transfer a call to another handset on your Philips XL4902S phone, during an active call, press the Intercom button followed by the number of the desired handset. The call will be transferred to the selected handset.

Is the Philips XL4902S a DECT telephone?

Yes, the Philips XL4902S is a DECT telephone. This means it operates on the DECT technology, which provides excellent sound quality and long-range coverage.

Does the Philips XL4902S have an answering machine?

No, the Philips XL4902S does not have an answering machine. This means users will need to rely on a separate device or service to handle their voicemail needs.

Does the Philips XL4902S have an intercom feature?

Yes, the Philips XL4902S has an intercom feature. This allows users to communicate between different handsets within the same system, making it convenient for in-home communication.

What is the maximum indoor range of the Philips XL4902S?

The maximum indoor range of the Philips XL4902S is 50 meters. This means users can make and receive calls within a 50-meter radius from the base unit.

Does the Philips XL4902S support multi-handset capability?

Yes, the Philips XL4902S supports multi-handset capability for up to 4 handsets. This is beneficial for households or businesses that need multiple handsets for convenient communications in various rooms.

Is the manual of the Philips XL4902S available in English?

Yes, the manual of the Philips XL4902S is available in English .

Is your question not listed? Ask your question here

No results