8 EN
3
Connect each end of the power adapter to (for multi handset version only): • the DC input jack at the bottom of the extra handset charger. • the power socket on the wall. Install the handset The batteries are pre-installed in the handset. Pull the battery tape off from the battery door before charging. Caution
• Risk of explosion! Keep batteries away from
heat, sunshine or fire. Never discard batteries in
fire.
• Use only the supplied batteries.
• Risk of decreased battery life! Never mix
different brands or types of batteries.
Note
• Charge the batteries for 8 hours before first use.
• If the handset becomes warm when the batteries
are charging, it is normal.
Warning
• Check the battery polarity when inserting in the
battery compartment. Incorrect polarity may
damage the product.
Configure your phone (country dependent) 1
When using your phone for the first time, you see a welcome message. 2
Press [OK] . Set the country/language Select your country/language, then press [OK] to confirm. The country/language setting is saved. Note
• The country/language setting option is country
dependent. If no welcome message is displayed,
it means the country/language setting is preset
for your country. Then you can set the date and
time.
To re-set the language, see the following steps. 1
Select [Menu] > [Phone setup] > [Language], then press [OK] to confirm. 2
Select a language, then press [OK] to confirm. The setting is saved.
Need help?
Do you have a question about the Philips and is the answer not in the manual?
Question and answer
Number of questions: 0