Philips XL4901DS manual

Philips XL4901DS
5.3 · 1
PDF manual
 · 43 pages
English
manualPhilips XL4901DS
24 EN
Note
Make sure that all the handsets registered to the
base station are XL490/XL495 in order to have
the ECO+ feature functioning properly.
When ECO+ is activated, the standby time is
reduced. This is because ECO+ mode the base
station is not transmitting any signal in standby
mode; therefore the handset needs to listen
more frequently for signals from the base station
to detect incoming calls or other requests
from the base station. The time it takes for the
handset to access features like call setup, call log,
paging, and Phonebook browsing is also delayed.
The handset will not alert you to link loss in case
of power loss or moving out of range.
The following table shows you the current status
of the handset screen with different ECO mode
and ECO+ mode settings.
ECO
mode
ECO+
mode
Handset icon display
[Off] [Off] and are off.
[Off] [On] is displayed only after
the ECO+ mode is activated
during standby mode.
[On] [Off] is displayed.
[On] [On] is displayed and changed
to when the ECO+ mode
is activated in standby mode.

Name the handset

The name of the handset can be up to 14
characters. It is displayed on the handset screen
in standby mode.
1
Select [Menu] > [Phone setup] > [Phone
name], then press [OK] to confirm.
2
Enter or edit the name. To erase a
character, select [Clear].
3
Press [OK] to confirm.
The setting is saved.

Set the date and time

For information, see Set the date and time (see
Set the date and time on page 9).

Set the display language

Note
This feature only applies to models with multiple-
language support.
Languages available vary from country to
country.
1
Select [Menu] > [Phone setup] >
[Language], then press [OK] to confirm.
2
Select a language, then press [OK] to
confirm.
The setting is saved.

Auto answer

When you activate the auto answer feature, you
can connect to the incoming call automatically
once you pick up the handset. When you
deactivate this feature, you have to press or
to answer the incoming call.
1
Select [Menu] > [Phone setup] > [Auto
answer], then select [OK] to confirm.
2
Select [On]/[Off], and select [OK] to
confirm.
The setting is saved.

View the manual for the Philips XL4901DS here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 5.3. This manual is available in the following languages: English. Do you have a question about the Philips XL4901DS or do you need help? Ask your question here

Need help?

Do you have a question about the Philips and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandPhilips
ModelXL4901DS | XL4901DS/38
Productphone
EAN4895185608310
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)
Weight & dimensions
Cable length1.8 m
Package weight0.5952 g
Package depth7.5 mm
Package height15.7 mm
Package width19.7 mm
Phone features
Phonebook capacity50 entries
Multi base capability1
Power
Battery capacity550 mAh
Power consumption (typical)0.7 W
Management features
Alarm clockYes
Display
Backlight colorWhite
Performance
Number of melodies10
IntercomYes
Design
Buttons quantity24
Other features
BacklightYes
Quantity1
Clock/Date displayYes
Certificates
Specific absorption rate (SAR) value (EU)0.1 W/kg
Call management
Redial list capacity20
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Philips XL4901DS below.

Is the manual of the Philips XL4901DS available in English?

Yes, the manual of the Philips XL4901DS is available in English .

Is your question not listed? Ask your question here

No results