23EN
English
Set the key tone Key tone is the sound made when you press a
key on the handset.
1
Select [Menu] > [Phone setup] > [Sounds]
> [Key tone] , then press [OK] to confirm.
2
Select [On] /[Off] , then press [OK] to
confirm.
The setting is saved.
Set the docking tone Docking tone is the sound made when you place
the handset on the base station or charger.
1
Select [Menu] > [Phone setup] > [Sounds]
> [Docking tone] , then press [OK] to
confirm.
2
Select [On] /[Off] , then press [OK] to
confirm.
The setting is saved.
Set the battery tone Battery tone is the sound made when the battery
is low and needs recharging.
1
Select [Menu] > [Phone setup] > [Sounds]
> [Battery tone] , then press [OK] to
confirm.
2
Select [On] /[Off] , then press [OK] to
confirm.
The setting is saved.
Eco mode The ECO mode reduces the transmission power
of the handset and base station when you are on
a call or when the phone is in standby mode.
1
Select [Menu] > [Phone setup] > [Eco
mode], then press [OK] to confirm.
2
Select [On] /[Off] , and press [OK] to
confirm.
The setting is saved.
ECO is displayed in standby mode.
Note
• When ECO mode is set to [On] , the connection
range between the handset and the base station
can be reduced.
ECO+ mode When the ECO+ mode is activated, it eliminates
the radiation of the handset and base station in
standby mode.
1
Select [Menu] > [Phone setup] > Eco+
mode, then press [OK] to confirm.
2
Select [On] /[Off] , and press [OK] to
confirm.
The setting is saved.
ECO+ is displayed in standby mode
after a while.
Need help?
Do you have a question about the Philips and is the answer not in the manual?
Question and answer
Number of questions: 0