Philips XL4901DS manual

Philips XL4901DS
5.3 · 1
PDF manual
 · 43 pages
English
manualPhilips XL4901DS
15EN
English

While you are on the phone

You can go from one handset to another during
a call:
1
Press and hold .
The current caller is put on hold.
For multi-handset versions, the
handsets available for intercom are
displayed, then go to step 2.
2
Select a handset, then press [OK] to
confirm.
Wait for the other side to answer your
call.

Switch between calls

Press and hold to switch between the outside
call and the intercom call.

Make a conference call

A 3-way conference call is between you, another
handset user and the outside callers. It requires
two handsets to share the same base station.

During an external call

1
Press and hold to initiate an internal call.
The external caller is put on hold.
For multi-handset versions, the
handsets available for intercom are
displayed, then go to step 2.
For two-handset versions, the other
handset rings, then go to step 3.
2
Select a handset, then press [OK] to
confirm.
The selected handset rings.
3
Press on the selected handset.
The intercom is established.
4
Press [Conf].
You are now in a 3-way conference
call with an external call and a selected
handset.
5
Press to end the conference call and
transfer the existing call to the selected
handset.
Note
Press to join an ongoing conference with
another handset if [Services] > [Conference] is
set to [Auto].

During the conference call

1
Press [Int.] to put the external call on hold
and go back to the internal call.
The external call is put on hold.
2
Press [Conf] to establish the conference call
again.
Note
If a handset hangs up during the conference call,
the other handset remains connected to the
external call.

View the manual for the Philips XL4901DS here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 5.3. This manual is available in the following languages: English. Do you have a question about the Philips XL4901DS or do you need help? Ask your question here

Need help?

Do you have a question about the Philips and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandPhilips
ModelXL4901DS | XL4901DS/38
Productphone
EAN4895185608310
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)
Weight & dimensions
Cable length1.8 m
Package weight0.5952 g
Package depth7.5 mm
Package height15.7 mm
Package width19.7 mm
Phone features
Phonebook capacity50 entries
Multi base capability1
Power
Battery capacity550 mAh
Power consumption (typical)0.7 W
Management features
Alarm clockYes
Display
Backlight colorWhite
Performance
Number of melodies10
IntercomYes
Design
Buttons quantity24
Other features
BacklightYes
Quantity1
Clock/Date displayYes
Certificates
Specific absorption rate (SAR) value (EU)0.1 W/kg
Call management
Redial list capacity20
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Philips XL4901DS below.

Is the manual of the Philips XL4901DS available in English?

Yes, the manual of the Philips XL4901DS is available in English .

Is your question not listed? Ask your question here

No results