The autonomy of your phone seems lower than indicated on the user guide
The autonomy is linked to your settings (e.g., ringer volume, backlight duration) and the features you
use. To increase the autonomy, and whenever possible, you must deactivate features you do not use.
Your phone doesn’t work well in your car
A car contains many metallic parts that absorb electromagnetic waves which can affect the phone’s
performance. A car kit is available to provide you with an external antenna and enables you to make
and receive phone calls without handling the handset.
Note:
•
Check with the local authorities whether or not you are allowed to use the phone while driving.
Your phone is not charging
If the battery is completely flat, it might take several minutes of pre-charge (up to 5 minutes in some
cases) before the charging icon is displayed on the screen.
The picture captured with the phone camera is not clear
Make sure that the camera lens on both sides is clean.
Trademark Declaration
Specific Absorption Rate Information
International standards
THIS MOBILE PHONE MEETS THE INTERNATIONAL RECOMMENDATIONS FOR EXPOSURE
TO RADIO WAVES
Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed
the limits for exposure to radio frequency (RF) energy defined by the international standards. These
recommendations have been established by the International Commission on Non-Ionizing Radiation
Protection (ICNIRP) and, the Institute of Electrical and Electronics Engineers (IEEE) that forecast a
substantial safety margin for assuring the protection of all persons, regardless of age and health.
The exposure recommendations for mobile phones use a measurement unit known as the Specific
Absorption Rate (SAR). The SAR limit recommended by the ICNIRP for the mobile phones used by
the general public is
2.0W/kg averaged over ten grams of tissue and, is 1,6W/kg averaged over one
gram of tissue
by IEEE Std 1528 for the head.
Tests for SAR have been conducted using recommended operating positions with the mobile phone
transmitting at its highest certified power level in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual SAR levels of the mobile phone while
operating are generally below the maximum SAR value. This is because the phone is designed to
operate at multiple power levels so as to use only the power required to reach the network. In
general, the closer you are to a base station antenna, the lower the power output.
While there may be differences between the SAR levels of various phones and at various positions,
they all meet the international protection standards for exposure to radio waves.
The highest SAR value for this Philips E311 model phone when tested for compliance
against the standard was 1.370 W/kg for ICNIRP recommendation.
T9
®
T9
®
is a registered trademark of Nuance Communications, Inc..
JAVAJAVA is a trademark of Sun Microsystems, Inc.
Bluetooth™Bluetooth™is a trade-mark owned by telefonaktiebolaget L M Ericsson,
Sweden and licensed to Philips.
PhilipsPHILIPS and PHILIPS’ Shield Emblem are registered trademarks of Koninklijke
Philips N.V. manufactured by Shenzhen Sang Fei Consumer Communications
Co., Ltd. Under license from Koninklijke Philips N.V..
View the manual for the Philips Xenium CTE311NY here, for free. This manual comes under the category smartphones and has been rated by 1 people with an average of a 6.7. This manual is available in the following languages: English. Do you have a question about the Philips Xenium CTE311NY or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Philips Xenium CTE311NY below.
How do I reset mhy Philips Xenium CTE311NY?
Most Philips model phones can be reset by using a key combination of volume + button, power on/off button and home button at startup.
My SIM card is too small and doesn't fit in my Philips phone. Now what?
It is possible to use a SIM card adapter. Insert the too small SIM card into the adapter and then place the adapter in the phone.
What is an IMEI number?
IMEI stands for 'International Mobile Equipment Identity'. This is a unique fifteen-digit number that distinguishes your Philips phone from other phones.
What screen dimensions does my smartphone have?
The size of your smartphone is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your smartphone, so you measure the screen from bottom left to top right.
Can the battery of my smartphone explode?
Make sure the batteries of your smartphone do not get too hot, in that case there is a very small chance that the battery will explode.
What is the weight of the Philips Xenium CTE311NY?
The Philips Xenium CTE311NY has a weight of 112.5 g.
What is the screen size of the Philips Xenium CTE311NY?
The screen size of the Philips Xenium CTE311NY is 2.4 ".
What is the height of the Philips Xenium CTE311NY?
The Philips Xenium CTE311NY has a height of 56 mm.
What is the screen resolution of the display of the Philips Xenium CTE311NY?
The screen resolution of the Philips Xenium CTE311NY is 240 x 320 pixels.
What is the width of the Philips Xenium CTE311NY?
The Philips Xenium CTE311NY has a width of 134 mm.
What is the depth of the Philips Xenium CTE311NY?
The Philips Xenium CTE311NY has a depth of 15 mm.
What type of USB connection does the Philips Xenium CTE311NY have?
The Philips Xenium CTE311NY has a Micro-USB connection.
Is the manual of the Philips Xenium CTE311NY available in English?
Yes, the manual of the Philips Xenium CTE311NY is available in English .
Need help?
Do you have a question about the Philips and is the answer not in the manual?
Question and answer
Number of questions: 0