Philips Series 7000 BT7501 manual

Philips Series 7000 BT7501
7.3 · 1
PDF manual
 · 7 pages
English
manualPhilips Series 7000 BT7501

Length settings

The selected length setting is shown above the
zoom wheel when you select the desired hair
length setting with the zoom wheel.

Charging

Before first usage charge the appliance for 2 hours
without interruptions and until the battery charging
indication shows that the battery is full. This is
needed to make maximum use of the battery
capacity. All next charges will take 1 hour.
Charge the appliance before first use and when the
bottom light of the battery status indicator flashes
orange.
1 Make sure the appliance is switched off.
2 Put the supply unit in the wall socket and put
the small plug in the appliance (Fig. 7).
3 After charging, remove the supply unit from the
wall socket and pull the small plug out of the
appliance.
When the appliance is fully charged, it has a
cordless operating time of up to 60 minutes.

Quick charge

When the battery is empty and you connect the
appliance to the wall socket, the battery charge
indicator flashes quickly. When the appliance
contains enough energy for one trimming session,
the battery charge indicator starts flashing white
slowly.
Quick charge takes approx. 5 minutes.

Using the appliance

Note: This appliance can be used without cord or
directly from the wall socket.
You can use this appliance for a stubble beardand
ashort beard. This appliance has an integrated
vacuum system that catches cut beard hair for
aless messy trimming experience.
The vacuum system is activated automatically as
soon as you switch on the appliance.
Note: Switch off and clean the appliance after each
use.

Switching the appliance on and off

Press the on/off button once to switch the
appliance on or off (Fig. 8).

Trimming without comb

- Use the appliance without beard and stubble
comb to trim hair close to the skin or to contour
the neckline and sideburns. To trim hair close to
the skin, place the flat side of the trimming
head against your skin and make strokes in the
desired direction (Fig. 9).
- For contouring, hold the trimming head
perpendicular to the skin and move the
trimming head upwards or downwards with
gentle pressure (Fig. 10).
- You can use the precision trimmer to create fine
lines and contours around your facial style,
close to the skin. Simply pull the cutting
element straight off (Fig. 11) and insert the
precision trimmer.

Trimming with comb

Note: When you trim for the first time, start at the
highest length setting to familiarize yourself with
the appliance.
- You can use the beard and stubble comb
attached to the cutting element to groom your
beard and moustache in your preferred style.
For the beard and stubble comb, you can turn
the zoom wheel to choose from 20 length
settings ranging from 0.5mm to 10mm in steps
of 0.5mm (Fig. 6).
1 Attach the detail comb or the beard and
stubble comb onto the appliance (Fig. 12).
2 Switch on the appliance.
3 To trim most effectively, move the appliance
against the hair growth direction (Fig. 13). Make
sure that the surface of the comb always stays
in contact with the skin.

Cleaning and maintenance

Cleaning the appliance

Note: Only the cutting element and the comb can
be cleaned with water.
We advise you to empty the hair-collection
chamber after each trimming session. When you
trim long, dense beards, it may also be necessary
to empty the hair-collection chamber during the
trimming session in order to maintain optimal
suction performance.
1 Switch off the appliance and disconnect it from
the wall socket.
2 Wipe the housing of the appliance with a dry
cloth.
3 Remove the comb (Fig. 14) and clean it with the
cleaning brush and/or rinse it under the tap
(Fig. 15).
4 Remove the cutting unit and clean it under the
tap (Fig. 16). Carefully shake off excess water
and let the cutting unit air-dry completely.
Caution: Never dry the cutting unit with a towel or
tissue, as this may damage the trimming teeth.
5 Shake out the hairs that have collected in the
hair chamber.
6 Brush out the hairs with the cleaning brush (Fig.
17) or cleaning sponge (Fig. 18) supplied.
7 After cleaning, reattach the cutting unit (Fig. 19)
and comb (Fig. 12) to the appliance.

Recycling

- Do not throw away the product with the normal
household waste at the end of its life, but hand
it in at an official collection point for recycling.
By doing this, you help to preserve the
environment.
- This product contains a built-in rechargeable
battery which shall not be disposed of with
normal household waste. Please take your
product to an official collection point or a
Philips service center to have a professional
remove the rechargeable battery.

Manual

View the manual for the Philips Series 7000 BT7501 here, for free. This manual comes under the category beard trimmers and has been rated by 1 people with an average of a 7.3. This manual is available in the following languages: English. Do you have a question about the Philips Series 7000 BT7501 or do you need help? Ask your question here

Need help?

Do you have a question about the Philips and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Philips Series 7000 BT7501 specifications

Below you will find the product specifications and the manual specifications of the Philips Series 7000 BT7501.

General
BrandPhilips
ModelSeries 7000 BT7501 | BT7501/85
Productbeard trimmer
EAN8710103878179, 8710103878186, 8710103879848
LanguageEnglish
FiletypeUser manual (PDF)
Performance
Product colorBlack
Number of length steps20
Number of length steps20
Oil-free maintenanceYes
Step precise0.5 mm
Minimum hair length0.5 mm
Maximum hair length10 mm
Wet & DryNo
Non-scratching teethYes
Easy to cleanYes
Control typeButtons
Self-sharpening bladeYes
Other features
Oil-free maintenanceYes
Design
Product colorBlack
Blade materialStainless steel
Ergonomic handleYes
Ergonomic designYes
Hair collecting chamberYes
Travel lockYes
CordlessYes
Power
Fast charging time5 min
Operating time60 min
Charging indicatorYes
Charging time1 h
Fast chargingYes
RechargeableYes
Power sourceAC/Baterry
AC input voltage100-240  V
Battery technologyNickel-Metal Hydride (NiMH)
Packaging content
Storage pouchYes
Accessories includedSystém Lift & Trim, Strojček na úpravu chĺpkov na tele pre mužov (séria BG1000), Mäkké odkladacie puzdro, Čistiaca kefka
Battery
Rechargeable batteryYes
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Philips Series 7000 BT7501 below.

Does the Philips Series 7000 BT7501 have oil-free maintenance?

Yes, the Philips Series 7000 BT7501 has oil-free maintenance. This means that the user does not need to regularly apply oil to the trimmer's blades, making maintenance easier and more convenient.

Does the Philips Series 7000 BT7501 have a step precise feature with a 0.5 mm setting?

Yes, the Philips Series 7000 BT7501 has a step precise feature with a 0.5 mm setting. This allows the user to achieve precise and accurate trims, giving them control over their desired beard length.

Can the Philips Series 7000 BT7501 be used both wet and dry?

No, the Philips Series 7000 BT7501 cannot be used wet and dry. This means that it is only suitable for dry trimming and cannot be used in the shower or with water-based grooming products.

Does the Philips Series 7000 BT7501 have non-scratching teeth?

Yes, the Philips Series 7000 BT7501 has non-scratching teeth. This feature ensures that the user's skin is protected from any potential irritation or discomfort during trimming.

Is the Philips Series 7000 BT7501 easy to clean?

Yes, the Philips Series 7000 BT7501 is easy to clean. This means that the user can easily remove any hair or debris from the trimmer, ensuring optimal performance and hygiene.

Is the manual of the Philips Series 7000 BT7501 available in English?

Yes, the manual of the Philips Series 7000 BT7501 is available in English .

Is your question not listed? Ask your question here

No results