Philips SE255 manual

Philips SE255
9.1 · 2
PDF manual
 · 46 pages
English
manualPhilips SE255
18
Using your phone
4.1.7 Call using Direct Access
Memory
In idle mode, long press 1 or 2 to
dial a stored direct access memory
number.
See section 5.5.6 for instructions on how
to store, edit, and delete direct access
memory numbers.
4.1.8 Enter a Dialing Pause
Make a long press # after entering one
or more digits to enter a pause in the
dialling sequence.
4.2 Answer a call
When the handset rings during an
incoming call, please do not hold the
handset too close to your ear as the
volume of the ringing tone may damage
your hearing.
When the phone rings, press t.
The call is established.
Incoming call has priority over other
events. Whenever there is an incoming
call, other status in progress such as
phone setting, menu navigation, etc will
be aborted.
4.2.1 Handsfree answering
Handsfree activation can suddenly
increase the volume in the earpiece to a
very high level. Make sure the handset is
not too close to your ear.
When the phone rings, press l.
The handset loudspeaker is activated.
4.2.2 Call waiting
If you have subscribed to Call Waiting
services, the earpiece will emit a beep
tone to inform you that there is a second
incoming call. The number or name of
the second caller will also be displayed if
you have subscribed to Caller Line
Identification service (CLI). Please
contact your network provider for more
information on this service.
To answer the second call, press t and
then 2 to answer the call.
The first call is put on hold, and you
are now connected to the second call.
OR
Press t and then 1 to end the
current call and answer the second call.
4.3 End a call
To end a conversation, press h.
The call ends.
When auto hang-up is on, you can simply
place the handset back to its base station
or charger to end the call. This feature is
activated by default.
The call duration (MM-SS) will be
displayed on the handset screen for
about 5 seconds.
Note
Danger
Note
Danger
Tip
Note

View the manual for the Philips SE255 here, for free. This manual comes under the category phones and has been rated by 2 people with an average of a 9.1. This manual is available in the following languages: English. Do you have a question about the Philips SE255 or do you need help? Ask your question here

Need help?

Do you have a question about the Philips and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandPhilips
ModelSE255
Productphone
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Philips SE255 below.

How do I navigate through the different sections of the manual?

To navigate through the different sections of the manual for the Philips SE255 phone, follow these steps: 1. Start by opening the manual and go to the table of contents. This section provides an overview of the topics covered in the manual. 2. Look for the section titled "Getting started." This section will guide you through the initial setup and installation process of your phone. 3. Within the "Getting started" section, you will find information about connecting the base station, installing the battery, and charging the battery. 4. Next, explore the section titled "Using your phone." This section covers various aspects of making and answering calls, including predialing, direct dialing, call log, and phonebook usage. 5. In the "Using your phone" section, you will also find instructions on adjusting the earpiece or speaker volume, muting/unmuting the microphone, and activating/deactivating loudspeaker mode during a call. 6. To access and manage your phonebook, refer to the section titled "Using your Phonebook." Here, you will learn how to store contacts, access the phonebook, modify entries, and delete entries. By following these steps, you will be able to navigate through the different sections of the manual and find the relevant information you need for using your Philips SE255 phone.

What should I do if my phone does not turn on?

If your Philips SE255 phone does not turn on, you can follow these steps to troubleshoot the issue: 1. Check the battery: Ensure that the handset is properly placed on the base station to charge. After a few moments, the phone should switch on. If the handset does not charge, check the charger connections and adjust the handset slightly for better battery contact. Clean the battery contacts with a cloth moistened with alcohol if they are dirty. 2. Communication loss during a call: If the phone loses communication during a call, try charging the battery or moving closer to the base station. 3. "Out of range" message: If the phone displays an "Out of range" message, move closer to the base station. 4. Searching message on the handset: If the handset displays a "SEARCHING" message and the icon is blinking, move closer to the base station, ensure that the base station is on, and try resetting the unit and restarting handset registration. 5. No ringtone or no dialing tone: Check the ring volume settings and ensure that the microphone is not muted. Also, check the power connections, charge the batteries if empty, and use the correct line cord and line adaptor if required. If these steps do not resolve the issue, you may need to contact customer support for further assistance.

How do I make a call using the Philips SE255 phone?

To make a call using the Philips SE255 phone, follow these steps: 1. Predialling: a. Dial the number (maximum 24 digits). b. Press the "t" button to initiate the call. 2. Direct dialling: a. Pick up the handset and press the "t" button. (Alternatively, press the "l" button to start a call in speaker mode.) b. Dial the number. c. The call will be initiated. 3. Call from the redial list: a. Press the "r" button in idle mode. b. Scroll to an entry in the redial list. c. Press the "t" button to initiate the call. 4. Call from the call log: a. Press the "u" button in idle mode. b. Scroll to an entry in the call list. c. Press the "t" button to initiate the call. 5. Call from the phonebook: a. Press the "d" button in idle mode. b. Scroll to a phonebook entry. c. Press the "t" button to initiate the call. Note: Instead of scrolling, you can press the numeric key corresponding to the first letter of the entry you wish to locate. 6. Dialing from the phonebook while on the phone: a. While on the phone, press the "o" button to enter the phonebook name list. b. Scroll to the phonebook entry. c. Press the "t" button to dial the number. 7. Call using Direct Access Memory: a. In idle mode, long press 1 or 2 to dial a stored direct access memory number. 8. Enter a Dialing Pause: Make a long press "#" after entering one or more digits to enter a pause in the dialing sequence. To end a call, press the "h" button.

What should I do if I can't hear the other person during a call?

If you can't hear the other person during a call on your Philips SE255 phone, you can try the following steps to troubleshoot the issue: 1. Check the volume: Make sure that the volume on your phone is not set too low or muted. Adjust the volume using the volume control buttons on the handset during the call. 2. Move closer to the base station: If you are experiencing weak signal or interference, try moving closer to the base station to improve the call quality. 3. Check the microphone: Ensure that the microphone on your phone is not blocked or covered. Clear any obstructions and try speaking into the microphone again. 4. Check the network signal: If you are using a mobile network, check the signal strength on your phone. If the signal is weak, consider moving to an area with better network coverage. 5. Restart the phone: Sometimes, restarting the phone can resolve temporary software glitches. Disconnect the call, power off the phone, wait for a few seconds, and then power it back on. Re-establish the call and check if the issue persists. If none of these steps resolve the issue, you may need to contact customer support for further assistance.

How do I add a contact to the phonebook?

To add a contact to the phonebook of your Philips SE255 phone, follow these steps: 1. Press the "m" button in idle mode. 2. Scroll to "PHONEBOOK" using the navigation buttons and press the "o" button. 3. Scroll to "NEW ENTRY" and press the "o" button. 4. "ENTER NAME" will be displayed on the screen. Enter the name of the contact using the keypad (maximum 12 characters) and press the "o" button to confirm. 5. "ENTER NUMBER" will be displayed on the screen. Enter the phone number of the contact using the keypad (maximum 24 digits) and press the "o" button to confirm. 6. A validation tone will be emitted, indicating that the contact has been successfully added to the phonebook. 7. To view the details of the contact, press the "o" button while browsing the phonebook. Press the "c" button to display the remaining digits if the entry is more than 12 digits. 8. To modify a phonebook entry, go to the "PHONEBOOK" menu, scroll to "EDIT ENTRY," select the entry you want to edit, and follow the prompts to make the necessary changes. 9. To delete a phonebook entry, go to the "PHONEBOOK" menu, scroll to "DELETE," select the entry you want to delete, and confirm the deletion. 10. To delete all phonebook entries, go to the "PHONEBOOK" menu, scroll to "DELETE ALL," and confirm the deletion. Note: If the phonebook memory is full, you will need to delete existing entries to make space for new ones.

How do I navigate through the different sections of the manual?

To navigate through the different sections of the manual for the Philips SE255 phone, follow these steps: 1. Start by opening the manual and go to the table of contents. This section provides an overview of the topics covered in the manual. 2. Look for the section titled "Getting started." This section will guide you through the initial setup and installation process of your phone. 3. Once you have set up your phone, proceed to the section titled "Using your phone." Here, you will find instructions on how to make and answer calls, access the phonebook, use the keypad, adjust volume, and other basic phone functions. 4. If you want to explore more features of your phone, refer to the section titled "Use more of your phone." This section covers additional functions such as keypad lock/unlock, text or number entry, adjusting volume during a call, muting/unmuting the microphone, and activating/deactivating loudspeaker mode. 5. If you encounter any issues or have specific questions about a particular feature, refer to the relevant section in the manual for troubleshooting steps and solutions. Remember to consult the manual for detailed instructions and illustrations specific to the Philips SE255 phone.

What should I do if my phone does not turn on?

If your Philips SE255 phone does not turn on, follow these steps to troubleshoot the issue: 1. Check the battery: Ensure that the handset is properly placed on the base station to charge. Wait for a few moments, and the phone should switch on. If the handset does not charge, check the charger connections and adjust the handset slightly for better battery contact. Clean the battery contacts with a cloth moistened with alcohol if they are dirty. 2. Communication loss during a call: If the phone loses communication during a call, try charging the battery or moving closer to the base station. 3. "Out of range" message: If the phone displays an "Out of range" message, move closer to the base station. 4. Searching message on the handset: If the handset displays a "SEARCHING" message and the icon is blinking, move closer to the base station, ensure that the base station is on, and try resetting your unit and restarting handset registration. 5. No sound or dial tone: Check that the RING VOLUME is not set to "RINGER OFF" and make sure the microphone is not muted. Ensure that the power connections are correct, the batteries are charged, and you are using the correct line cord and line adaptor if applicable. If these steps do not resolve the issue, you may need to contact customer support for further assistance.

Why am I unable to make or receive calls on my phone?

If you are unable to make or receive calls on your Philips SE255 phone, try the following troubleshooting steps: 1. Check the signal strength: Ensure that you are within range of the base station. Move closer to the base station to improve signal reception. 2. Verify the phone line connection: Make sure that the phone line is properly connected to the base station. Check for any loose or damaged cables and ensure they are securely plugged in. 3. Check for call restrictions: Verify that there are no call restrictions or barring settings enabled on your phone. Check the phone settings menu for any call-related options that may be affecting your ability to make or receive calls. 4. Restart the phone: Try restarting your phone by disconnecting the power supply from the base station, waiting for a few seconds, and then reconnecting it. This can help resolve temporary software glitches that may be causing the issue. 5. Contact your service provider: If the issue persists, contact your service provider to ensure that there are no network or account-related issues that may be preventing you from making or receiving calls. If none of these steps resolve the issue, it is recommended to consult the Philips customer support for further assistance.

How do I add a contact to my phonebook?

To add a contact to your Philips SE255 phonebook, follow these steps: 1. Press the "m" button on your phone while in idle mode. 2. Scroll to "PHONEBOOK" using the navigation buttons and press the "o" button to select it. 3. Select "NEW ENTRY" and press the "o" button to enter the new contact details. 4. The screen will display "ENTER NAME." Enter the name of the contact using the keypad, with a maximum of 12 characters, and press the "o" button to confirm. 5. The screen will then display "ENTER NUMBER." Enter the phone number of the contact using the keypad, with a maximum of 24 digits, and press the "o" button to confirm. 6. A validation tone will be emitted, indicating that the contact has been successfully added to the phonebook. 7. To return to idle mode, press and hold the "h" button for more than 5 seconds. Note: If the phonebook memory is full, you will need to delete existing entries to make space for new ones. To access the phonebook, press the "d" button in idle mode and scroll to browse the entries. The phonebook entries will be listed in alphabetical order. Press the "o" button to view the details of a contact. To modify or delete a phonebook entry, refer to the corresponding sections in the manual for detailed instructions. Please note that these instructions are specific to the Philips SE255 phone and may vary for other models.

What should I do if the keypad on my phone is not responding?

If the keypad on your Philips SE255 phone is not responding, try the following troubleshooting steps: 1. Check for any physical obstructions: Ensure that there are no objects or debris blocking the keypad buttons. Clean the keypad gently with a soft, dry cloth to remove any dirt or dust that may be affecting the responsiveness. 2. Restart the phone: Try restarting your phone by disconnecting the power supply from the base station, waiting for a few seconds, and then reconnecting it. This can help resolve temporary software glitches that may be causing the issue. 3. Check the battery: Make sure that the handset is properly placed on the base station to charge. If the battery is low, charge the handset and wait for a few moments to see if the keypad becomes responsive. 4. Reset the phone: If the keypad still does not respond, try resetting the phone to its factory settings. Refer to the manual for instructions on how to perform a factory reset. Note that this will erase all personalized settings and data on the phone. 5. Contact customer support: If none of the above steps resolve the issue, it is recommended to contact Philips customer support for further assistance and possible repair options. Please note that these steps are specific to the Philips SE255 phone and may vary for other models.

Is the manual of the Philips SE255 available in English?

Yes, the manual of the Philips SE255 is available in English .

Is your question not listed? Ask your question here

No results