10 Getting started
3 Getting started 3.1 Connect the base station
Place the
base station in a central location near the telephone line
socket and electricit y socket.
Connect the line cord and the
power cable to their correspo nding
connectors at the back of the base
station.
Connect the other end of th e line
cord and power cable to their
respective sockets.
Note
The line adaptor may not be at tached to t he
line cord. In this case, you have to connect
the line adaptor to the line co rd first before
plugging the line cord to the line socket.
Warning
Avoid placing the base station t oo close to
large metal objects such as filing cabinets,
radiators or electrical applian ces. This can
impair the range and so und quality.
Buildings with thick internal and external
walls may impair transmission of signals to
and from the base.
Warning
The base station does not have an ON/OFF
power switch. Power is applied when the
power adaptor is plugged into the unit and
connected to the elec tricity socket. The
only way to power down the unit is to
unplug the power adap tor from the
electricity socket. Therefore, ensure that
the electricity socket is easily accessible.
The power adaptor and te lephone line cord
have to be connected correctly, as incorr ect
connection could damage the unit.
Always use the telephone line cord
supplied with the u nit. Otherwise, you
may not get a di al tone.
3.2 Wall mounting the base
The base is designed to support wall
mounting. To wa ll mount the base, fo llow
the instructions below.
Warning
Other wall mounting methods are no t
recommended and may dama ge the
product.
Remove the bracket from the back
of the base station by pressing down
the two latches on the top of the
bracket.
1
2
3
!
!
!
1
CD150_IFU_master_UK. book Page 10 Tu esday, February 19, 2 008 9:11 AM
Need help?
Do you have a question about the Philips and is the answer not in the manual?
Question and answer
Number of questions: 0