Philips SE150 manual

Philips SE150
7.2 · 5
PDF manual
 · 44 pages
English
manualPhilips SE150
Beginnen 13
3.3.2 Batterijen opladen
Waarschuwing
De handset moet tenminste 24 uur geladen
worden voordat het toestel in gebruik
genomen kan worden.
Als de batterij leeg raakt, wordt u door de
batterijsensor middels een hoorbare toon
en het knipperen van het batterijsymbool
gealarmeerd.
Als de batterij nagenoeg leeg is, wordt de
telefoon kort na het alarm automatisch
uitgeschakeld, en eventuele actieve
functies worden afgebroken.
Plaats de handset in de houder van het
basisstation. Een toon is te horen als de
handset op de juiste manier in de
houder is geplaatst.
Het batterijsymbool op het
display knippert tijdens het opladen.
Het knipperen van het batterijsymbool
stopt als de handset volledige
geladen is.
Opmerking
De optimale conditie van de batterijen
wordt bereikt na 3 keer opladen (meer
dan 15 uur) en afladen, waarna ongeveer
12 uur spreektijd en 150 uur standby-tijd
beschikbaar is.
Het bereik van de telefoon binnen en buiten
is respectievelijk maximaal 50 meter en 300
meter. Als de handsets buiten het bereik van
het basisstation komt, gaat het
antennesymbool knipperen.
Tip
Ga dichter bij het basisstation staan als u
buiten bereik komt en de verbinding
slecht wordt.
3.4 Welkommodus
Voordat u de handset in gebruik kunt
nemen, moet het toestel ingesteld
worden voor het netwerk van uw land.
Nadat het toestel enkele minuten
opgeladen wordt, verschijnt het woord
WELKOM op het display in verschillende
talen. Ga als volgt te werk om het toestel
in te stellen:
Opmerking
Het is mogelijk dat, afhankelijk van uw land,
het WELKOM-scherm niet verschijnt. In
dat geval is het niet nodig uw land/
netwerk/taal in te stellen.
U kunt bellen en gebeld worden zonder dat
uw land is ingesteld.
Druk op de
<
OK
-toets om de
landenlijst op te roepen.
* Standaard is de uitgaande boodschap ingesteld op taal 1. Zie sectie 9.6.3 voor
informatie over het veranderen van de taal van de vooraf geprogrammeerde uitgaande
boodschap.
!
1
2
3
1
Land
Standaard taal van
uitgaande boodschap
*Beschikbare taal uitgaande
boodschap
Duitsland
Duits 1 - Duits
Oostenrijk Duits 2 - Turks
Turkije Turks 3 - Frans
Frankrijk Frans 4 - Engels
Zwitserland Engels
Verenigd Koninkrijk Engels 1 - Engels
Ierland

View the manual for the Philips SE150 here, for free. This manual comes under the category phones and has been rated by 5 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Philips SE150 or do you need help? Ask your question here

Need help?

Do you have a question about the Philips and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 4
E
EDUARDO DE AMORIM GONÇALVES April 27, 2015

Boa tarde. Peço ajuda para o seguinte tenho o vosso telefone CD150 SE150 mas ao receber uma chamada só toca no telefone 1 o 2 não toca contudo em ambos é estabelecida ligação/conversação que fazer? Grato. Cump.

E
ehsanApril 25, 2015

Hi. I need an english manual for Philips SE 150 radar phone. Would you mind sending me one!!!Thank you very much.

E
emily carhartMay 18, 2015

Hello, Please would you be kind enough to send me a manual for the black cordless phone phillips SE150. Many thanks Emily

N
NancyMay 25, 2021

Does it have a speakerphone?

The Philips SE150 is a basic mobile phone model manufactured by Philips. It features a simple design with a small color display and physical keypad. The phone has standard calling and messaging capabilities, including support for SMS and MMS. It also includes a built-in FM radio for entertainment purposes. The Philips SE150 is equipped with a basic camera for capturing photos, though the resolution is not specified. The phone has a limited internal memory capacity for storing contacts and messages. Additionally, it supports a microSD card slot for expanding storage space. The Philips SE150 is powered by a removable battery, which allows for easy replacement if needed. It is designed to be a budget-friendly and user-friendly device for those seeking a straightforward mobile communication solution. The phone may be suitable for individuals who prioritize simplicity and functionality over advanced features and technology.

General
BrandPhilips
ModelSE150
Productphone
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Philips SE150 below.

How do I troubleshoot if the phone is not connecting to the base station?

To troubleshoot if the Philips SE150 phone is not connecting to the base station, follow these steps: 1. Placement: Ensure that the base station is placed in a central location, close to the telephone socket and power outlet. 2. Connections: Connect the telephone line cable and power cable to their respective connectors at the back of the base station. Plug the other ends of the cables into the corresponding sockets. 3. Line Adapter: Check if the line adapter is connected to the telephone line cable. If not, connect the line adapter to the cable before connecting it to the telephone socket. 4. Avoid Interference: Avoid placing the base station near large metallic objects or dense internal and external walls, as they can reduce signal transmission. 5. Power Supply: Note that the base station does not have an ON/OFF switch. Power is transmitted when the power adapter is connected to the unit and plugged into the power outlet. To turn off the unit, disconnect the power adapter from the power outlet. 6. Correct Connections: Ensure that the power adapter and telephone line cable are connected correctly to avoid any damage to the unit. Always use the supplied telephone line cable to receive dial tone. By following these steps, you should be able to troubleshoot the issue of the Philips SE150 phone not connecting to the base station.

How do I troubleshoot if I cannot make or receive calls on the phone?

To troubleshoot if you cannot make or receive calls on the Philips SE150 phone, follow these steps: 1. Check the signal strength: Ensure that you have a strong signal by checking the signal bars on the phone's display. If the signal is weak, move to an area with better reception or try restarting the phone. 2. Verify the network settings: Go to the phone's settings menu and navigate to the network or cellular settings. Make sure that the phone is connected to the correct network and that the cellular data is enabled. 3. Restart the phone: Sometimes, a simple restart can resolve temporary network issues. Turn off the phone, wait for a few seconds, and then turn it back on. 4. Check for call barring: In the phone settings, look for the call barring option. Ensure that call barring is not enabled for incoming or outgoing calls. 5. Remove and reinsert the SIM card: Turn off the phone and remove the SIM card. Check for any visible damage or dirt on the SIM card and clean it if necessary. Then, reinsert the SIM card securely and turn on the phone. 6. Contact your service provider: If the issue persists, contact your service provider for further assistance. They can check if there are any network outages or configuration issues that may be affecting your ability to make or receive calls. Remember, these troubleshooting steps are specific to the Philips SE150 phone and should help resolve most call-related issues.

How do I troubleshoot if the keypad is not responding when I press the buttons?

To troubleshoot if the keypad of your Philips SE150 phone is not responding when you press the buttons, follow these steps: 1. Check if the keypad is locked. In the idle mode, press and hold the "*" key for a few seconds to unlock the keypad. 2. Make sure the batteries are properly inserted in the phone. Remove and reinsert the batteries to ensure a secure connection. 3. Try resetting the phone. This will restore the default settings, including the keypad functionality. Refer to the manual for instructions on how to reset the phone. 4. If the issue persists, disconnect the power supply from the base station and reconnect it. Then, follow the registration procedure to register the phone again. Refer to the manual for detailed instructions on how to register a phone. 5. If none of the above steps resolve the issue, contact the customer support of your phone operator for further assistance. Remember to refer to the manual for more information and troubleshooting options specific to the Philips SE150 phone.

Is the manual of the Philips SE150 available in English?

Yes, the manual of the Philips SE150 is available in English .

Is your question not listed? Ask your question here

No results