Philips SB7200 manual

Philips SB7200
  • Number of pages: 2
  • Filetype: PDF


If there is no music playback or connection for three minutes,
the amplifier on the speaker switches off to save power. The
blue light flashes at intervals. To resume, change the volume or
restart music playback. 15 minutes after the amplifier switches
off, the speaker switches off. The blue light turns off. To switch
on, press the power button.


Rated output power: 2 X 3 W/ THD 2%
Signal to noise ratio: LINE-IN/Bluetooth > 65dB
LINE-IN: Input sensitivity 230mV RMS


Bluetooth profiles: A2DP, AVRCP, HFP, HSP
Bluetooth version: 2.1

General information

Power adapter
Philips EFA01200500200EU(/12),EFA01200500200UK(/05)
Input: 100-240 V~ 50/60 Hz, 0.4A;
Output: 5 V DC 2 A
maximum 200 mA for USB, 800 mA for power adapter
(power off)/ 200 mA for operation
Power supply
1,500 mAh Li-ion polymer internal rechargeable battery
Power consumption (AC power)
Operation: < 10 W
Power off: ≤ 0.5 W
Extra - Pair two SHOQBOX speakers
Gesture control
Press twice to switch the Smart Sensor on or off.
Voice feedback\ Language options
When the speaker is on, press once to get the voice
feedback on battery level. To select a language, press and
hold the button when the speaker is off until you hear
language options. Press the button to confirm your option.


(for charging)
Flashing red light: Power charging ongoing
Red light off: Power charging complete



1.The first time you connect two speakers, place

them horizontally and together.

2.Switch on the

speakers (Follow Step
in Connect).


twice to switch on the Smart Sensor.


pairing as shown: swipe from left to right on the
left speaker, and at the same time, swipe from right
to left on the right speaker. Wait one minute until
you hear the voice feedback "Left speaker" and
"Right speaker". The two speakers are paired
successfully. Connect your Bluetooth device to
the speakers.
The Left speaker is the master one. With the
volume control on the Left speaker, you can
adjust the volume on both speakers.
To unpair, switch the two speakers off.
1 sec
Specifications are subject to change without notice
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
SB7200_05_Arabic_V1.0 WK1238.2
After successful connection, you hear
"SHOQBOX is paired"
On the Bluetooth device, switch on Bluetooth and search for SHOQBOX. For
the first-time connection, select SHOQBOX to start connection. If necessary,
enter the passcode 0000 or 1234.
Through Bluetooth, connect the SHOQBOX speaker
with your Bluetooth device, such as an iPad, iPhone,
iPod touch, Android phone, or laptop.
You can place the speaker horizontally or vertically.
DA Brugervejledning
EL Εγχειρίδιο χρήσησ
EN User manual
ES Manual del usuario

Switch on & Connect

Sensor inteligente
Έξυπνοσ αισθητήρασ
Intelligent sensor
Smart Sensor
Put your hand close to the Smart Sensor. Swipe forwards or
backwards to skip songs.
Press twice to switch on the Smart Sensor.
Put your hand close to the Smart Sensor. Swipe
downwards to pause; to resume, swipe
downwards again.
Press to switch on, press and hold to switch off.
After successful connection, start music play on the Bluetooth device. You
can listen to music from SHOQBOX. The music streaming may be
interrupted by obstacles between the device and SHOQBOX, such as walls,
metallic casing that covers the device, or other devices nearby that operate
in the same frequency.
1 sec
iPod touch iPhone iPadBluetooth
. Android


.SHOQBOX BluetoothBluetooth
 SHOQBOX 1234 0000 ..


 .Bluetooth
 .SHOQBOX
 )( 
 .
 .
 AR
SB7200_05_Arabic_V1.0.indd 1 2012/9/18 9:37:39
Philips SB7200

Need help?

Number of questions: 0

Do you have a question about the Philips SB7200 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Philips SB7200 owners to properly answer your question.

View the manual for the Philips SB7200 here, for free. This manual comes under the category Cradles & Docking Stations and has been rated by 3 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Philips SB7200 or do you need help? Ask your question here

Philips SB7200 specifications

Brand Philips
Model SB7200
Product Cradle / docking station
EAN 609585223486, 6923410717877, 8712581636111, 8712581641962, 8712581646806
Language English
Filetype PDF
Audio output channels 2.0 channels
Number of speakers 2
Number of drivers 2
Speaker type 2-way
Subwoofer driver diameter 25.4 mm
Woofer diameter 25.4 mm
Recommended usage Universal
Amplifier Built-in
Mobile operating systems supported Android,Android 2.1,Android 2.2,Android 2.3,Android 3.0,Android 3.1,Android 3.2,Android 4.0,Android 4.1
Product design -
Product colour Black
On/off switch
Product type Stereo portable speaker
RMS rated power 8 W
Frequency range 0 Hz
Impedance 0 Ω
Other features
Dimensions (WxDxH) 72 x 68 x 179 mm
Subwoofer dimensions (W x D x H) 25.4 mm
Ports & interfaces
Connectivity technology Wired & Wireless
AUX in
AC (power) in
3.5 mm connector
Power source type Battery
Battery type Built-in
Battery life (max) 8 h
Battery technology Lithium
USB charging
show more

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Philips SB7200.

Is your question not listed? Ask your question here