View the manual for the Philips OneBlade QP2620 here, for free. This manual comes under the category beard trimmers and has been rated by 7 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Philips OneBlade QP2620 or do you need help? Ask your question here


| Brand | Philips |
| Model | OneBlade QP2620 | QP2620/20 |
| Product | beard trimmer |
| EAN | 0871010383165, 0871010383166, 8710103831662, 8710103831655, 8710103896357, 8710103896364, 8710103906407, 8710103923169, 8710103952947 |
| Language | English |
| Filetype | User manual (PDF) |
| Wet & Dry | Yes |
| Power consumption (max) | 2 W |
| Rechargeable | Yes |
| Power source | Battery |
| Battery operated | Yes |
| Battery type | Built-in |
| Operating time | 45 min |
| Charging time | 8 h |
| AC input voltage | 100 - 240 V |
| Battery type | Built-in |
| Operating time | 45 min |
| Charging time | 8 h |
| Battery type | Built-in battery |
| Operating time | 45 min |
| Charging time | 8 h |
| AC input voltage | 100 - 240 V V |
| Charging indicator | Yes |
| Power source | Battery |
| Rechargeable | Yes |
| Battery level indicator | Yes |
| Wet & Dry | Yes |
| Product color | Black, Green, Lime |
| Suitable for entire body | Yes |
| Maximum hair length | 1 mm |
| Minimum hair length | 5 mm |
| Number of speeds | - |
| Number of length steps | 3 |
| Shaving head replacement(s) model | QP210, QP220, QP610, QP620 |
| Wet & Dry | Yes |
| Waterproof | Yes |
| Maximum hair length | 1 mm |
| Minimum hair length | 5 mm |
| Number of speeds | - |
| Number of length steps | 3 |
| Wet & Dry | Yes |
| Waterproof | Yes |
| Maximum hair length | 1 mm |
| Minimum hair length | 5 mm |
| Number of length steps | 3 |
| Power consumption (max) | 2 W |
| Power consumption (max) | 2 W |
| Combs quantity | 4 |
| Attachment combs | Beard |
| Protection cap | Yes |
| Attachment combs | Beard |
| Protection cap | Yes |
| Protection cap | Yes |
| Waterproof | Yes |
| Rubber grips | Yes |
| 2 |
| Battery charge indicator | Yes |
| Battery low indication | Yes |
| Product color | Black, Green, Lime |
| Product color | Black, Green, Lime |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Philips OneBlade QP2620 below.
Yes, the Philips OneBlade QP2620 is suitable for both wet and dry use. This means that users can use it in the shower or with shaving foam for a comfortable and customizable shaving experience.
Yes, the Philips OneBlade QP2620 has a battery charge indicator. This feature allows users to easily monitor the battery level and plan their grooming sessions accordingly, ensuring that they never run out of power during use.
The Philips OneBlade QP2620 comes with 4 attachment combs. This variety of combs allows users to achieve different beard lengths and styles, providing versatility and convenience in grooming.
Yes, the Philips OneBlade QP2620 is waterproof. This means that users can safely and easily clean the trimmer under running water, making maintenance and hygiene hassle-free.
The operating time of the Philips OneBlade QP2620 on a full charge is 45 minutes. This provides users with a sufficient amount of time to complete their grooming routine without the need for frequent recharging.
To adjust the length settings on the Philips OneBlade QP2620 beard trimmer, follow these steps: 1. Remove the skin guard: Put one finger under the edge of the guard and press with your thumb on the blade. 2. Switch on the trimmer: Turn on the appliance to activate the blade. 3. Position the blade on the skin: Place the blade on the desired area of your beard and move the trimmer against the grain in long strokes while applying light pressure. Use your free hand to stretch the skin for better control. Note: Ensure that you hold the surface of the blade flat against your skin for optimal trimming results. 4. Switch off and clean: After each use, switch off the trimmer and clean it thoroughly. Refer to the "Cleaning and maintenance" section in the manual for detailed instructions on how to clean the appliance. Additionally, if you want to trim hair on your body below the neckline, you can use the 3mm body comb. Simply hold the body comb on both sides and press it onto the blade. Follow the same steps as mentioned above for trimming your beard, but with the body comb attached. Remember to always make sure that the tips of the comb point in the direction you are moving the trimmer and that the flat part of the comb is in full contact with the skin for an even trimming result. Please note that the available information is based on the Philips OneBlade QP2620 beard trimmer manual. For more detailed instructions and illustrations, refer to the manual provided with the product.
There could be several reasons why your Philips OneBlade QP2620 beard trimmer is not charging. Here are some possible causes and solutions: 1. Check the power source: Ensure that the charging stand is properly connected to a functioning power outlet. Make sure the power outlet is not controlled by a switch or a circuit breaker. 2. Clean the charging contacts: Over time, dirt or debris may accumulate on the charging contacts of the trimmer or the charging stand. Use a clean, dry cloth to wipe the contacts and remove any residue. 3. Verify the charging cable: Check the charging cable for any signs of damage or wear. If the cable is damaged, it may not provide a proper connection for charging. In such cases, replace the charging cable with a new one. 4. Allow time for charging: The QP2620 beard trimmer may take some time to charge fully. Ensure that you leave the trimmer on the charging stand for the recommended charging duration mentioned in the manual. 5. Reset the trimmer: If the trimmer still does not charge, try resetting it. Disconnect the trimmer from the charging stand, remove the blade, and then reattach the blade and place the trimmer back on the charging stand. If none of these steps resolve the issue, it is recommended to contact Philips customer support for further assistance.
No, you cannot use the Philips OneBlade QP2620 beard trimmer while it is plugged in. Here's why: 1. Safety precautions: The QP2620 beard trimmer is designed to be used wirelessly for safety reasons. Using the trimmer while it is plugged in can pose a risk of electric shock or injury. 2. Battery operation: The trimmer is powered by a rechargeable battery, allowing you to use it without the need for a direct power source. This provides flexibility and convenience during grooming sessions. 3. Charging process: To ensure optimal performance, it is recommended to charge the trimmer fully before use. The charging process allows the battery to store enough power for cordless operation. 4. Cordless usage: Once the trimmer is fully charged, you can use it cordlessly for a certain period of time, depending on the battery capacity. This allows you to move freely and comfortably while trimming your beard. Remember to always follow the safety guidelines provided in the manual and use the trimmer as instructed. Using the trimmer while it is plugged in can void the warranty and may result in damage to the device or personal injury.
To clean the Philips OneBlade QP2620 beard trimmer after use, follow these steps: 1. Remove the comb: Hold the comb on both sides and pull it off the blade. 2. Remove hair from the guard: If a lot of hair has accumulated in the guard, remove it from the trimmer and blow or shake out the hairs. 3. Blow off excess hair: If a lot of hairs have accumulated on the comb or the trimmer, blow them off to remove them. 4. Rinse the blade and combs: Switch on the trimmer and rinse the blade with lukewarm water. Rinse the combs with lukewarm water as well. 5. Shake off excess water: Carefully shake off excess water from all parts of the trimmer and let them air dry completely. Do not dry the blade with a towel or tissue. 6. Store the trimmer: Always attach the protection cap on the blade to protect it from damage during storage or travel. It is recommended to let the trimmer and its attachments dry before storing them for the next use. Note: Never use compressed air, scouring pads, abrasive cleaning agents, or aggressive liquids such as petrol or acetone to clean the trimmer. Tap the trimmer against a surface to remove water, as this may cause damage. Replace the blade if it is damaged. These cleaning instructions are based on the Philips OneBlade QP2620 beard trimmer manual. For more detailed instructions and illustrations, refer to the manual provided with the product.
There could be several reasons why your Philips OneBlade QP2620 beard trimmer is not turning on. Here are some possible causes and solutions: 1. Empty battery: If the trimmer does not turn on, it may be because the rechargeable battery is empty. Connect the trimmer to the charging stand and let it charge for the recommended duration mentioned in the manual. 2. Power failure or socket issue: Check if there is a power failure or if the wall socket is live. If there is a power failure, wait for the power to be restored. If the wall socket is not live, try plugging the charging stand into a different socket. 3. Blocked blade: If the trimmer is not turning on, it could be due to a blocked blade. Switch on the trimmer and rinse the blade under warm water. You can also hold the blade in a cup of warm water for approximately 30 seconds to remove any dirt or debris. 4. Incorrect blade placement: Ensure that the blade is placed correctly on the handle. Push the blade onto the appliance until you hear a click to ensure proper attachment. 5. Damaged or worn blade: If none of the above steps resolve the issue, it is possible that the blade is damaged or worn. In such cases, replace the blade with a new one as per the instructions provided in the manual. Please note that these troubleshooting steps are based on the information available for the Philips OneBlade QP2620 beard trimmer. For more detailed instructions and illustrations, refer to the manual provided with the product.
Yes, the manual of the Philips OneBlade QP2620 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Philips and is the answer not in the manual?
Question and answer
Number of questions: 4Hello. The network charger cannot determine when the device is fully charged because the green light is constantly on. The shaver does not have an LED light! My question is, how do I determine the battery's full charge?
"How do I know that the shaver is charged?"
This message has been automatically translatedthe green light stays on while charging. what's it mean?
My 2620 doesn't show any lights when charging and is plugged in correctly