Philips M3501B manual

Philips M3501B
8.3 · 3
PDF manual
 · 48 pages
English
manualPhilips M3501B
37EN

Unregister handsets

If two or more handsets share the
same base station, you can unregister
the handset or other handsets.
1
Press MENU/OK.
2
Select [Services] > [Unregister],
then press MENU/OK to conrm.
3
Enter the system PIN. (The preset
PIN is 0000). Press REDIAL/C to
remove the number.
4
Select [Other handsets],
then select a handset to be
unregistered. For pre-registered
handset, select [This handset].
5
Press MENU/OK to conrm.
» The handset is unregistered.
Tip
The handset name is displayed beside the
handset number in standby mode.
Note
A handset cannot unregister itself if it is the
only handset registered to the base station.

Restore default settings

You can reset your phone settings to
the original factory settings.
1
Press MENU/OK.
2
Select [Services] > [Reset], then
press MENU/OK to conrm.
» A conrmation request is
displayed on the handset.
3
Press MENU/OK to conrm.
» All settings (except the
phonebook) are reset.

View the manual for the Philips M3501B here, for free. This manual comes under the category phones and has been rated by 3 people with an average of a 8.3. This manual is available in the following languages: English. Do you have a question about the Philips M3501B or do you need help? Ask your question here

Need help?

Do you have a question about the Philips and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
H
Hans HelmutSeptember 18, 2021

is M3501B an ip/VoIP phone that can be connected to the router?

The Philips M3501B phone is a sleek and well-designed device that offers a range of features for an enhanced communication experience. With a speakerphone function and intercom capabilities, this phone allows for hands-free talking and easy communication between different rooms. The phonebook capacity of 50 entries ensures that you can store all your important contacts for quick and easy access. Weighing 354 grams, this phone is lightweight and easy to handle. The cable length of 1.8 meters provides flexibility in terms of placement within your home or office. With a battery capacity of 300 mAh, you can enjoy up to 10 hours of talk time on a single charge. The high contrast 4.6cm 2-line reverse display ensures clear visibility of caller information and other details. The Philips M3501B phone also offers eco-conscious features such as zero power emission when ECO+ mode is activated. The elegant design of this phone, with calibrated, seamlessly integrated keys and a compact footprint, adds a touch of sophistication to your communication setup. Overall, the Philips M3501B phone combines style and functionality to deliver a seamless calling experience.

General
BrandPhilips
ModelM3501B | M3501B/22
Productphone
EAN4895185630519
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)
Phone features
SpeakerphoneYes
Phonebook capacity50 entries
Multi base capability1
Microphone muteYes
Multi handset capability4
Paging functionYes
Weight & dimensions
Cable length1.8 m
Package weight508 g
Package depth101 mm
Package height225 mm
Package width121 mm
Weight354 g
Power
Battery capacity300 mAh
Power consumption (typical)0.7 W
Standby time180 h
Battery recharge time8 h
Talk time10 h
Battery typeAAA
Battery technologyNickel-Metal Hydride (NiMH)
Number of batteries supported2
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Display
Backlight colorWhite
Display diagonal1.8 "
Built-in displayYes
Backlight displayYes
Performance
IntercomYes
Maximum indoor range50 m
Maximum outdoor range300 m
Handset typeWireless handset
Answering machineNo
TypeDECT telephone
Number of melodies10
Ringer typePolyphonic
GAP compatibleYes
ECO modeYes
Other features
Clock/Date displayYes
USB chargingYes
Signal strength indicationYes
Battery level indicatorYes
Packaging content
Number of handsets included1
Base stationYes
Indication
Battery charge indicatorYes
Management features
Programmable hot keysYes
Alarm clockYes
Volume controlDigital
Call management
Caller ID on call waitingYes
Caller IDYes
Redial list capacity10
Call log entries20
Design
Keypad lockYes
Backlight buttonsYes
Product colorBlack
Elderly phoneNo
Mounting typeDesk
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Philips M3501B below.

What is the weight of the Philips M3501B?

The Philips M3501B has a weight of 354 g.

What is the screen size of the Philips M3501B?

The screen size of the Philips M3501B is 1.8 ".

How long does it take to charge the battery of the Philips M3501B?

It takes 8 h to charge the battery of the Philips M3501B.

Does the Philips M3501B have a speakerphone?

Yes, the Philips M3501B has a speakerphone. This means that you can use the phone hands-free and have conversations without holding the handset up to your ear.

How many entries can the phonebook of the Philips M3501B store?

The phonebook capacity of the Philips M3501B is 50 entries. This allows you to store a decent number of contacts for easy access.

Can the Philips M3501B be used with multiple bases?

No, the Philips M3501B does not have multi base capability. This means that it can only be used with one base station, limiting its flexibility for use in larger areas or multiple locations.

What is the battery capacity of the Philips M3501B?

The battery capacity of the Philips M3501B is 300 mAh. This indicates the amount of energy the battery can store, which affects the phone's talk and standby time.

Does the Philips M3501B have USB charging?

Yes, the Philips M3501B supports USB charging. This allows you to conveniently charge the phone using a USB cable, making it easier to find a compatible charging source.

How can I dispose of the packaging materials of the Philips M3501B phone?

To dispose of the packaging materials of the Philips M3501B phone, follow these steps: 1. Separate the packaging materials into three categories: cardboard (box), polystyrene foam (buffer), and polyethylene (bags, protective foam sheet). 2. Check the local regulations regarding the disposal of packaging materials in your area. Different regions may have specific guidelines for recycling or proper disposal. 3. Look for a specialized company that handles the recycling and disposal of electronic waste. They will have the necessary equipment and knowledge to disassemble the materials safely. 4. Contact the specialized company and inquire about their services for recycling packaging materials. They will provide you with instructions on how to proceed and may have designated drop-off points or collection services. 5. Follow the instructions provided by the specialized company to dispose of the packaging materials properly. This may involve dropping off the materials at a designated location or arranging for a pickup service. By following these steps, you can ensure that the packaging materials of the Philips M3501B phone are disposed of in an environmentally responsible manner, in compliance with local regulations and guidelines.

How do I make a call using the Philips M3501B phone?

To make a call using the Philips M3501B phone, follow these steps: 1. Ensure that the phone is charged and turned on. You should see the home screen or standby mode. 2. Enter the phone number you want to call using the numeric keypad. If you make a mistake, use the delete or clear button to correct it. 3. Press the call button, usually represented by a green phone icon. This will initiate the call. 4. Wait for the call to connect. You will hear a ringing sound or a dial tone, indicating that the call is in progress. 5. Once the call is connected, you can speak into the microphone located on the handset. Hold the handset close to your mouth for clear communication. 6. To end the call, press the end call button, usually represented by a red phone icon. This will terminate the call. By following these steps, you can easily make a call using the Philips M3501B phone. Remember to check the signal strength and ensure that you have a stable network connection for a successful call.

How do I answer an incoming call on the Philips M3501B phone?

To answer an incoming call on the Philips M3501B phone, follow these steps: 1. When the phone rings, the LED at the back of the handset will flash to indicate an incoming call. 2. To answer the call, simply pick up the handset. You can do this by lifting the handset from the base station or charging cradle. 3. Once you have picked up the handset, you will be able to speak to the caller through the microphone located on the handset. Hold the handset close to your mouth for clear communication. 4. If you have activated the auto answer feature, the call will be automatically answered when you pick up the handset. This means you don't need to press any buttons to answer the call. 5. If you have deactivated the auto answer feature, you will need to press the answer button, usually represented by a green phone icon, to answer the incoming call. By following these steps, you can easily answer an incoming call on the Philips M3501B phone. Remember to keep the handset charged and within range of the base station or charging cradle to ensure proper functionality.

How can I check the signal strength on the Philips M3501B phone?

To check the signal strength on the Philips M3501B phone, follow these steps: 1. Ensure that the handset is connected to the base station before checking the signal strength. This is important for making or receiving calls and using the phone's functions and features. 2. Look at the number of bars displayed on the screen. The signal strength is indicated by the number of bars shown. The more bars displayed, the better the connection. 3. If you hear warning tones while on a call, it may indicate that the handset is almost out of battery or out of range. In such cases, charge the battery or move the handset closer to the base station. 4. Note that when the ECO+ mode is activated, the signal strength is not displayed. By following these steps, you can easily check the signal strength on the Philips M3501B phone. Remember to ensure a stable connection for clear and uninterrupted communication.

How do I redial a call from the redial list on the Philips M3501B phone?

To redial a call from the redial list on the Philips M3501B phone, follow these steps: 1. Press the REDIAL/C button to enter the list of dialed calls. This will display the redial list on the screen. 2. Use the navigation buttons to select the desired record from the redial list. Each record represents a previously dialed call. 3. Once you have selected the desired record, press the MENU/OK button to confirm your selection. 4. If you want to save the selected call record to the phonebook, select the option "Save number" and press the MENU/OK button. You can then enter and edit the name and number before confirming. 5. To directly redial the selected call record, press the MENU/OK button and select the option "Redial". The phone will automatically dial the number associated with the selected record. 6. If you want to delete a specific redial record, select the record from the redial list, press the MENU/OK button, select the option "Delete", and confirm the deletion. 7. If you want to delete all redial records, access the redial list, press the MENU/OK button, select the option "Delete all", and confirm the deletion. By following these steps, you can easily redial a call from the redial list on the Philips M3501B phone.

Is the manual of the Philips M3501B available in English?

Yes, the manual of the Philips M3501B is available in English .

Is your question not listed? Ask your question here

No results