Philips InfraCare PR3140 manual

Philips InfraCare PR3140
8.7 · 6
PDF manual
 · 53 pages
English
manualPhilips InfraCare PR3140
PR3140

View the manual for the Philips InfraCare PR3140 here, for free. This manual comes under the category pain therapy appliances and has been rated by 6 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Philips InfraCare PR3140 or do you need help? Ask your question here

Need help?

Do you have a question about the Philips and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
K
Karin BrukerSeptember 10, 2021

Der Lüfter an meiner Infratot Stehlsmpe ist kaputt. Kann ich den bestellen und selber tauschen? Danke und viele Grüße

General
BrandPhilips
ModelInfraCare PR3140 | PR3140/00
Productpain therapy appliance
EAN8710103797463, 8710103802907, 8710103802914, 8710103802921
LanguageEnglish
FiletypeUser manual (PDF)
Technical details
Country of originHungary
Cable length3 m
F-box dimensions (=A-box)40.1 x 51.4 x 41.3 cm
Product colorWhite
Maximum height15.4 cm
Built-in displayNo
Massage functionNo
Power650 W
InsulationClass II
Features
Treatment area600 x 400 mm
Therapy methodInfrared
Integrated timerYes
Tilt adjustmentYes
Adjustable heightYes
Service life of lamp500 h
Cord length0.3 m
Weight & dimensions
Width515 mm
Depth401 mm
Height413 mm
Weight7 g
Power
Power sourceAC
AC input voltage110 - 230 V
AC input frequency50 - 60 Hz
Bulb power650 W
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Philips InfraCare PR3140 below.

What is the weight of the Philips InfraCare PR3140?

The Philips InfraCare PR3140 has a weight of 7 g.

What is the height of the Philips InfraCare PR3140?

The Philips InfraCare PR3140 has a height of 413 mm.

What is the width of the Philips InfraCare PR3140?

The Philips InfraCare PR3140 has a width of 515 mm.

What is the depth of the Philips InfraCare PR3140?

The Philips InfraCare PR3140 has a depth of 401 mm.

Is the Philips InfraCare PR3140 made in Hungary?

Yes, the Philips InfraCare PR3140 is made in Hungary. This means that it meets the quality standards and craftsmanship associated with products made in Hungary.

What is the treatment area of the Philips InfraCare PR3140?

The treatment area of the Philips InfraCare PR3140 is 600 x 400 mm. This provides a wide coverage area for effective pain therapy.

Does the Philips InfraCare PR3140 have a built-in display?

No, the Philips InfraCare PR3140 does not have a built-in display. However, this does not affect its functionality as it is designed for simplicity and ease of use.

Does the Philips InfraCare PR3140 have a massage function?

No, the Philips InfraCare PR3140 does not have a massage function. It focuses solely on providing effective pain therapy through infrared technology.

Is the Philips InfraCare PR3140's power source AC?

Yes, the Philips InfraCare PR3140's power source is AC. This means that it can be easily plugged into a standard power outlet for convenient and reliable use.

What should I do if the Philips InfraCare PR3140 pain therapy appliance does not turn on?

If the Philips InfraCare PR3140 pain therapy appliance does not turn on, you can follow these steps to troubleshoot the issue: 1. Check the power source: Ensure that the device is properly plugged into a functioning wall socket. Make sure the wall socket has a good connection and is providing power. 2. Verify the power indicator: Look for the power indicator light on the device. If the light is not illuminated, it indicates that the device is not receiving power. In this case, check the power source and try plugging the device into a different wall socket. 3. Check for overheating: The device is equipped with an automatic protection against overheating. If the device becomes too hot, it will switch off automatically. Ensure that the vents at the back of the device are not blocked and that there is enough space around the device for proper ventilation. 4. Reset the device: If the device still does not turn on, try resetting it. Unplug the device from the power source, wait for a few minutes, and then plug it back in. This can sometimes resolve temporary issues. 5. Contact customer support: If none of the above steps resolve the issue, it is recommended to contact Philips customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for repairs if necessary. Remember to always refer to the user manual for detailed instructions and safety information specific to the Philips InfraCare PR3140 pain therapy appliance.

How can I troubleshoot if the lamp of the Philips InfraCare PR3140 pain therapy appliance is not working?

To troubleshoot if the lamp of the Philips InfraCare PR3140 pain therapy appliance is not working, you can follow these steps: 1. Check the glass plate (filter): Ensure that the glass plate (filter) is not damaged, broken, or missing. If it is, contact the Philips Consumer Care Center for assistance. 2. Contact customer support: If the lamp stops working during the warranty period, do not attempt to replace it yourself. Instead, contact the Philips Consumer Care Center in your country for further information and assistance. Please note that these troubleshooting steps are based on the information provided in the manual for the Philips InfraCare PR3140 pain therapy appliance. If you encounter any other issues or require additional support, it is recommended to refer to the manual or contact Philips customer support for further assistance.

What should I do if the mains cord of the Philips InfraCare PR3140 pain therapy appliance is damaged?

If the mains cord of the Philips InfraCare PR3140 pain therapy appliance is damaged, follow these steps: 1. Safety precaution: Do not use the device if the mains cord is damaged to avoid any hazards. 2. Contact Philips: To have the mains cord replaced, contact Philips customer support or an authorized service center. They will provide you with the necessary information and assistance. Please note that these steps are based on the information provided in the manual for the Philips InfraCare PR3140 pain therapy appliance. It is important to refer to the manual or contact Philips customer support for specific instructions and safety guidelines related to your device.

Why does the Philips InfraCare PR3140 pain therapy appliance switch off before the preset treatment time has elapsed?

The Philips InfraCare PR3140 pain therapy appliance may switch off before the preset treatment time has elapsed due to the following possible causes and solutions: 1. Blocked cooling vents: If the device becomes too hot and the cooling vents are blocked, it may automatically switch off. Ensure that the cooling vents at the back of the device are not covered or blocked. This will allow proper ventilation and prevent overheating. 2. Defective fan: If the fan is defective and unable to cool the device properly, it may cause the device to switch off prematurely. In this case, it is recommended to contact the Philips Consumer Care Center for further assistance. Please note that these troubleshooting steps are based on the information provided in the manual for the Philips InfraCare PR3140 pain therapy appliance. It is important to refer to the manual or contact Philips customer support for specific instructions and safety guidelines related to your device.

How can I clean the Philips InfraCare PR3140 pain therapy appliance?

To clean the Philips InfraCare PR3140 pain therapy appliance, follow these steps: 1. Unplug the device: Before cleaning, ensure that the device is unplugged from the power source to avoid any electrical hazards. 2. Wipe the device: Use a soft, damp cloth to wipe the exterior of the device. Avoid using abrasive or harsh cleaning agents that may damage the surface. 3. Clean the glass plate (filter): The glass plate (filter) can be cleaned using a mild detergent and warm water. Gently wash the glass plate and rinse it thoroughly. Allow it to dry completely before reattaching it to the device. 4. Clean the lamp: The lamp of the device does not require cleaning or maintenance. If the lamp stops working, do not attempt to replace it yourself. Contact the Philips Consumer Care Center for assistance. Please note that these cleaning instructions are based on the information provided in the manual for the Philips InfraCare PR3140 pain therapy appliance. It is important to refer to the manual or contact Philips customer support for specific instructions and safety guidelines related to cleaning your device.

What should I do if the Philips InfraCare PR3140 pain therapy appliance does not turn on?

If the Philips InfraCare PR3140 pain therapy appliance does not turn on, there are a few possible causes and solutions you can try: 1. Check for a power failure: Connect another device to the same power supply to see if it works. If there is a power failure, you may need to address the power supply issue. 2. Check the lamp: If the lamp is defective, you should contact the Philips Consumer Care Center for assistance. 3. Inspect the mains cord: If the mains cord is damaged, it should be replaced by Philips or an authorized service center to avoid any hazards. If the device makes a ticking sound after disconnecting it from the wall socket, make sure the timer is in the off position. Turn the timer to the off position to resolve this issue. If the device switches off before the preset treatment time has elapsed and sometimes automatically switches on again, it may be due to blocked cooling vents causing the device to overheat. Ensure that the cooling vents are not covered or blocked. If the fan is defective and the device becomes too hot, contact the Philips Consumer Care Center for further assistance. Please note that these troubleshooting steps are specific to the Philips InfraCare PR3140 pain therapy appliance.

Why is there a ticking sound coming from the device after I disconnect it?

The ticking sound coming from the Philips InfraCare PR3140 pain therapy appliance after disconnecting it is likely due to the timer not being in the off position. To resolve this issue, follow these steps: 1. Locate the timer on the device. It is usually a knob or button that controls the duration of the treatment. 2. Turn the timer to the off position. This will stop the ticking sound and ensure that the device is not running unnecessarily. If the ticking sound persists even after turning off the timer, it may indicate a different issue. In such cases, it is recommended to contact the Philips Consumer Care Center for further assistance. Please note that these steps are specific to the Philips InfraCare PR3140 pain therapy appliance and may vary for other models or brands.

Why does the device switch off before the preset treatment time has elapsed?

The device may switch off before the preset treatment time has elapsed due to a few possible reasons. Here are the steps to troubleshoot this issue: 1. Check the timer: Ensure that the treatment time is properly set on the timer. Turn the timer knob to the preferred treatment time. 2. Blocked cooling vents: If the device becomes too hot, it may automatically switch off. Make sure that the cooling vents are not covered or blocked, as this can cause overheating. Clear any obstructions from the vents. 3. Defective fan: If the fan is not functioning properly, it can lead to overheating and automatic shutdown. In such cases, it is recommended to contact the Philips Consumer Care Center for further assistance. Please note that these troubleshooting steps are specific to the Philips InfraCare PR3140 pain therapy appliance. If the issue persists, it is advisable to seek support from the Philips Consumer Care Center for further guidance.

How do I clean the Philips InfraCare PR3140 pain therapy appliance?

To clean the Philips InfraCare PR3140 pain therapy appliance, follow these steps: 1. Ensure that the device is unplugged and turned off before cleaning. 2. Wipe the exterior surfaces of the device with a soft, damp cloth. Avoid using abrasive or harsh cleaning agents that may damage the device. 3. If the glass plate (filter) is dirty, gently remove it from the device. Clean the glass plate with a mild soap solution and rinse it thoroughly. Allow it to dry completely before reattaching it to the device. 4. If there is any dust or debris on the lamp, use a soft, dry cloth to gently wipe it clean. Do not attempt to replace the lamp yourself if it stops working. Contact the Philips Consumer Care Center for assistance. 5. Check the mains cord for any damage. If the cord is damaged, it should be replaced by Philips or an authorized service center to ensure safety. Remember to refer to the specific cleaning instructions provided in the manual for the Philips InfraCare PR3140 pain therapy appliance.

What should I do if the device is not providing the expected relief for muscle and joint pain?

If the Philips InfraCare PR3140 pain therapy appliance is not providing the expected relief for muscle and joint pain, you can try the following steps: 1. Check the positioning: Ensure that the device is positioned correctly on the affected area. Place the device at a distance of approximately 30 cm from the body and adjust the angle to target the specific area of pain. 2. Increase treatment time: If you are not experiencing the desired relief, you can try increasing the treatment time. Follow the recommended treatment duration mentioned in the manual and gradually increase it if necessary. 3. Consult a healthcare professional: If the device is not providing the expected relief, it is advisable to consult a healthcare professional. They can assess your condition and provide guidance on the appropriate use of the device or recommend alternative treatment options. Please note that individual results may vary, and it is important to follow the instructions provided in the manual for the Philips InfraCare PR3140 pain therapy appliance.

Is the manual of the Philips InfraCare PR3140 available in English?

Yes, the manual of the Philips InfraCare PR3140 is available in English .

Is your question not listed? Ask your question here

No results