Philips HTS3377 manual

Philips HTS3377
7.6 · 2
PDF manual
 · 50 pages
English
manualPhilips HTS3377
Register your product and get support at

www.philips.com/welcome

HTS3270
HTS3377
HTS3377W
EN User manual
FR Manuel d’utilisation
ES Manual de usuario
DE
Bedienungsanleitung
NL
Gebruikershandleiding
1_hts3270-3377-3377W_12_en3.indd 1 4/1/2009 10:00:00 AM

View the manual for the Philips HTS3377 here, for free. This manual comes under the category home cinema sets and has been rated by 2 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the Philips HTS3377 or do you need help? Ask your question here

Need help?

Do you have a question about the Philips and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandPhilips
ModelHTS3377
Producthome cinema set
EAN8712581459550
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Philips HTS3377 below.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my home cinema set?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How can I troubleshoot if the advanced features of the Philips HTS3377 home cinema set are not working properly?

To troubleshoot if the advanced features of the Philips HTS3377 home cinema set are not working properly, you can follow these steps: 1. Check the connections: Ensure that all cables are securely connected to their respective ports on the home cinema set and other devices. Make sure the cables are not damaged or loose. 2. Update the software: Check if there are any available software updates for the home cinema set. Visit the Philips website and download the latest software version if necessary. Follow the instructions provided to update the software. 3. Reset the system: If the advanced features are still not functioning correctly, try resetting the home cinema set to its factory settings. Refer to the user manual for instructions on how to perform a system reset. 4. Adjust the settings: Verify that the settings for the advanced features are properly configured. Check the audio setup, video setup, and general setup menus to ensure the desired settings are selected. 5. Contact customer support: If the issue persists after following the above steps, it is recommended to contact Philips customer support for further assistance. They can provide specific troubleshooting guidance based on the advanced features of the HTS3377 home cinema set. Remember to refer to the user manual for detailed instructions and illustrations specific to the Philips HTS3377 home cinema set.

What should I do if I am unable to connect the Philips HTS3377 home cinema set to my TV or other devices?

To connect the Philips HTS3377 home cinema set to your TV or other devices, follow these steps: 1. Option 1: Connect to the SCART jack: - Connect a SCART cable to the SCART TO TV jack on the home cinema set and the SCART input jack on the TV. - Press the AUDIO SOURCE button repeatedly until "SCART IN" is displayed on the home cinema set's display panel. 2. Option 2: Connect to the HDMI jack: - Connect an HDMI cable (not supplied) to the HDMI OUT jack on the home cinema set and the HDMI input jack on the TV. - If your TV supports HDMI CEC, you can control compliant devices with a single remote control. Refer to the "Get started" section for instructions on using Philips EasyLink. - If your TV only has a DVI connection, you can connect via an HDMI/DVI adapter. Connect an audio cable for sound output. You can optimize the video output in the "Adjust settings" > "Video setup" > [HDMI Setup] menu. 3. Option 3: Connect to the video (CVBS) jack: - This option is for a standard TV. - Connect video cables from the home cinema set to the TV to view disc play. Note: Ensure that you connect the home cinema set directly to the TV. For specific instructions and illustrations, refer to the user manual of the Philips HTS3377 home cinema set.

How can I troubleshoot if the Philips HTS3377 home cinema set does not power on or respond to the remote control?

To troubleshoot if the Philips HTS3377 home cinema set does not power on or respond to the remote control, you can follow these steps: 1. Check the power supply: Ensure that the power cord is securely plugged into the power outlet and the home cinema set. Make sure the power outlet is functioning properly by testing it with another device. 2. Verify the power switch: Check if the power switch on the back of the home cinema set is in the "On" position. If it is already in the "On" position, try turning it off and then back on again. 3. Replace the batteries: If the remote control is not responding, replace the batteries with new ones. Make sure to insert the batteries correctly, aligning the positive (+) and negative (-) ends according to the markings inside the battery compartment. 4. Reset the system: If the home cinema set still does not power on or respond to the remote control, try performing a system reset. Disconnect the power cord from the outlet, wait for a few minutes, and then reconnect it. 5. Contact customer support: If the issue persists after following the above steps, it is recommended to contact Philips customer support for further assistance. They can provide specific troubleshooting guidance based on the HTS3377 home cinema set. Please note that these steps are general troubleshooting suggestions and may vary depending on the specific issue. For detailed instructions and illustrations, refer to the user manual of the Philips HTS3377 home cinema set.

What should I do if I am experiencing playback issues with discs, videos, music, or photos on the Philips HTS3377 home cinema set?

To troubleshoot playback issues with discs, videos, music, or photos on the Philips HTS3377 home cinema set, you can follow these steps: 1. Check the disc compatibility: Ensure that the disc you are trying to play is compatible with the HTS3377 home cinema set. Refer to the "Specifications" section in the user manual for the supported disc formats. 2. Clean the disc: If the disc is dirty or scratched, clean it gently with a soft, lint-free cloth. Wipe the disc from the center to the outer edge in a straight line. 3. Check the disc placement: Make sure that the disc is inserted correctly into the disc compartment with the label facing up. For double-sided discs, load the side you want to play facing up. 4. Verify the disc type: Some discs may require additional steps for playback, such as entering a password or navigating through a menu. Follow the on-screen instructions or refer to the user manual for specific disc playback instructions. 5. Check the file format: If you are experiencing issues with playing videos, music, or photos from a USB device, ensure that the files are in a supported format. Refer to the "Specifications" section in the user manual for the supported file formats. If the playback issues persist after following these steps, it is recommended to contact Philips customer support for further assistance. They can provide specific troubleshooting guidance based on the HTS3377 home cinema set. Please note that these steps are general troubleshooting suggestions and may vary depending on the specific issue. For detailed instructions and illustrations, refer to the user manual of the Philips HTS3377 home cinema set.

How can I troubleshoot if there is no sound or poor sound quality coming from the speakers of the Philips HTS3377 home cinema set?

To troubleshoot if there is no sound or poor sound quality coming from the speakers of the Philips HTS3377 home cinema set, you can follow these steps: 1. Check the speaker connections: Ensure that all speaker cables are securely connected to their respective ports on the home cinema set and speakers. Make sure the connections are not loose or damaged. 2. Adjust the speaker volume: Use the volume control on the home cinema set or the remote control to increase the speaker volume. Make sure the volume is not set to the minimum or muted. 3. Balance the speaker levels: Access the speaker settings menu on the home cinema set and adjust the volume levels for each speaker. Ensure that the levels are balanced to achieve an even sound output. 4. Check the audio source: Verify that the correct audio source is selected on the home cinema set. Press the "AUDIO SOURCE" button on the remote control to cycle through the available sources and select the desired one. 5. Reset the audio settings: If the sound issues persist, try resetting the audio settings of the home cinema set to their default values. Refer to the user manual for instructions on how to perform a system reset or restore the default audio settings. If the sound problems continue after following these steps, it is recommended to contact Philips customer support for further assistance. They can provide specific troubleshooting guidance based on the HTS3377 home cinema set. Please note that these steps are general troubleshooting suggestions and may vary depending on the specific issue. For detailed instructions and illustrations, refer to the user manual of the Philips HTS3377 home cinema set.

Is the manual of the Philips HTS3377 available in English?

Yes, the manual of the Philips HTS3377 is available in English .

Is your question not listed? Ask your question here

No results