Philips Dect 211 manual

Philips Dect 211
8.1 · 2
PDF manual
 · 20 pages
English
manualPhilips Dect 211
12

Customising the telephone

To enter the programming mode press .
Icons representing the menus will then be displayed on the screen :
Réglages répondeur (uniquement pour le DECT 215)
Volume and melody settings (VIP melodies*)
Handset registering
Other settings
Once the menu is selected with and keys, press to
confirm your choice.
Note : Each menu has one or several options. The options will appear on the
screen one after the other by pressing . To exit the programming mode
at any time press or (long press) .
Use
and to
navigate within
the menus.
Icons : flashing
to select the
menu and
steady on once
entered in the
menu.

Programming the phone

www.philips.com/faqs/dect
Changing the day (1st option out of 5 : 1/5)
Each day is represented by a number : Monday as
1...Sunday as 7.
Scroll to the required day number with or
and press to validate.
Changing the time (option 2/5)
Enter the time (without any space or dash) and press
to validate.
Number of rings before answer (option 3/5)
You can select from the list (2,3,4,5 and toll saver** )
the number of rings after which the answerphone will
take the call.
Scroll to the required number of rings with or
and validate with .
*The VIP
settings allow
to store the
names in
particular
phonebook
groups.A
melody can be
associated to a
phonebook.
When ringing,
the VIP melody
helps you
identify the
caller’s group.
(see p. 13).
** :In toll saver mode, if there are new messages the answerphone will answer
after 3 rings, and only after 5 rings if there are no new messages. So, you can hang
up after 4 rings without paying for a call. Toll saver is useful for remote access only.

Answerphone settings (DECT 215 only)

DECT 215 master UK indice 1.qxd 30/08/2004 15:44 Page 12

View the manual for the Philips Dect 211 here, for free. This manual comes under the category phones and has been rated by 2 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Philips Dect 211 or do you need help? Ask your question here

Need help?

Do you have a question about the Philips and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandPhilips
ModelDect 211
Productphone
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Philips Dect 211 below.

How do I adjust the volume on the DECT 211 handset?

To adjust the volume on the DECT 211 handset, follow these steps: 1. During a call or when the handset is idle, locate the volume key on the handset. It is usually located on the side or front of the handset. 2. Press the volume key to increase or decrease the volume. Each press will adjust the volume level incrementally. 3. Continue pressing the volume key until you reach the desired volume level. The handset may emit a beep or provide visual feedback to indicate the volume level. 4. If you are using the loudspeaker feature, you can also adjust the volume specifically for the loudspeaker. Press the volume key while the loudspeaker is active to adjust its volume separately from the earpiece volume. Note: The DECT 211 handset offers three volume levels for both the earpiece and the loudspeaker. Make sure to adjust the volume to a comfortable level for clear and comfortable communication. Please let me know if you need any further assistance.

How do I register or unregister a handset with the DECT 215 base station?

To register or unregister a handset with the DECT 215 base station, follow these steps: 1. To register a handset, unplug the power adapter from the base station and then plug it back in to enter registration mode. 2. Once in registration mode, follow the instructions on the handset's display to complete the registration process. This may involve entering a registration code (RC code) that is written under the base station. 3. To unregister a handset, use the handset you want to unregister and enter the RC code. Follow the instructions on the handset's display to confirm the unregistration. 4. If you want to unregister all handsets except the one you are currently using, enter the RC code and follow the instructions on the handset's display to confirm the unregistration. Note: It is important to ensure that any non-Philips handsets you wish to associate with the DECT 211 or DECT 215 base stations are GAP compliant to ensure proper operation. Please let me know if you need any further assistance.

What do the screen icons on the DECT 211 base station indicate?

The screen icons on the DECT 211 base station indicate various functions and statuses. Here are the key screen icons and their meanings: 1. Caller's Number or Name: The screen can display the caller's number or name if known in the phonebook or sent by the network. It may also show stars if it is an unidentified call or dashes for a non-recognized number. 2. Call Log: The call log stores the last 10 external calls received, including answered calls, unanswered calls, voicemail box service information, and messages from your answerphone (DECT 215 only). 3. Message Indicator: If there is a new message on the voicemail box, the message indicator icon will flash. This feature is available if you have registered for the caller identification service with your operator. 4. Battery Charge Status: The battery charge status icon indicates the current battery level, such as charge in progress, fully charged, or low battery. Please note that the specific icons may vary slightly depending on the model and configuration of the DECT 211 base station. If you have any further questions, feel free to ask.

How do I access the call log or voicemail box on the DECT 215 base station?

To access the call log or voicemail box on the DECT 215 base station, follow these steps: 1. Press the call log button on the base station. The screen will display the last 10 external calls received, including answered calls, unanswered calls, voicemail box service information, and messages from your answerphone (DECT 215 only). 2. Use the navigation buttons (up and down arrows) to scroll through the call log entries. The screen will show the caller's number or name if known in the phonebook, stars for unidentified calls, or dashes for non-recognized numbers. 3. To call a number from the call log, select the desired entry and press the call button. The base station will dial the number for you. 4. To delete an entry from the call log, select the entry and press the delete button. Confirm the deletion if prompted. 5. If you want to store a number from the call log into your phonebook, select the entry and press the store button. Follow the instructions on the screen to enter the name and save the number. Note: The call log and voicemail box features are available if you have subscribed to the caller identification and/or name display services with your operator. If you have any further questions, feel free to ask.

How do I use the loudspeaker feature on the DECT 211 handset?

To use the loudspeaker feature on the DECT 211 handset, follow these steps: 1. During a call, locate the loudspeaker key on the handset. It is usually represented by an icon of a speaker or a phone with sound waves. 2. Press the loudspeaker key to activate the loudspeaker mode. The call audio will now be transmitted through the loudspeaker instead of the earpiece. 3. Place the handset on a flat surface or hold it at a comfortable distance to ensure optimal sound quality. 4. Adjust the volume using the volume key on the handset to set the desired loudspeaker volume level. 5. To switch back to the earpiece mode, press the loudspeaker key again. The call audio will now be heard through the earpiece. Note: The loudspeaker feature allows for hands-free communication, making it convenient for conference calls or situations where you need to share the call with others in the room. Ensure that the loudspeaker is not obstructed and that you are in a quiet environment for clear audio. If you have any further questions, feel free to ask.

How do I adjust the volume on the DECT 211 handset?

To adjust the volume on the DECT 211 handset, follow these steps: 1. During a call or when the handset is idle, locate the volume key on the handset. It is usually located on the side or front of the handset. 2. Press the volume key to increase or decrease the volume. Each press will adjust the volume level incrementally. 3. Continue pressing the volume key until you reach the desired volume level. The handset may emit a beep or provide visual feedback to indicate the volume level. 4. If you are using the loudspeaker feature, you can also adjust the volume specifically for the loudspeaker. Press the volume key while the loudspeaker is active to adjust its volume separately from the earpiece volume. Note: The DECT 211 handset offers three volume levels for both the earpiece and the loudspeaker. Make sure to adjust the volume to a comfortable level for clear and comfortable communication. Please let me know if you need any further assistance.

How do I register or unregister a handset with the DECT 215 base station?

To register or unregister a handset with the DECT 215 base station, follow these steps: 1. To register a handset, unplug the power adapter from the base station and then plug it back in to enter registration mode. 2. Once in registration mode, follow the instructions on the handset's display to complete the registration process. This may involve entering a registration code (RC code) that is written under the base station. 3. To unregister a handset, use the handset you want to unregister and enter the RC code. Follow the instructions on the handset's display to confirm the unregistration. 4. If you want to unregister all handsets except the one you are currently using, enter the RC code and follow the instructions on the handset's display to confirm the unregistration. Note: It is important to ensure that any non-Philips handsets being associated with the DECT 211 or DECT 215 base stations are GAP compliant to ensure proper operation. Please let me know if you need any further assistance.

What do the screen icons on the DECT 211 base station indicate?

The screen icons on the DECT 211 base station indicate the following: - Caller's number: This icon displays the caller's phone number if it is available. - Caller's name: If the caller's name is known and stored in the phonebook or sent by the network, this icon will display the caller's name. - Stars: This icon represents an unidentified call. - Dashes: If the number is not recognized, this icon will display dashes. - New message indicator: This icon flashes when there is a new message on the voicemail box (subject to a subscription with your operator). - Battery charge status: This icon indicates the battery charge level, showing if it is in progress, fully charged, or low. To access or exit the call log, use the corresponding icons or buttons on the base station. The call log stores the last 10 external calls received, including answered calls, unanswered calls, voicemail box service information, and messages from your answerphone (DECT 215 only). Please note that the availability and appearance of screen icons may vary depending on the specific model and settings of the DECT 211 base station. If you have any further questions, feel free to ask.

How do I access the call log or voicemail box on the DECT 215 base station?

To access the call log or voicemail box on the DECT 215 base station, follow these steps: 1. On the base station, locate the "Call log / Voicemail Box" icon. It is usually represented by a phone receiver or an envelope symbol. 2. Press the corresponding button or icon to access the call log or voicemail box. 3. Use the navigation buttons or the keypad on the base station to scroll through the entries in the call log or voicemail box. 4. To listen to voicemail messages, select the desired message and press the play button or follow the on-screen instructions. 5. To delete a voicemail message, select the message and press the delete button or follow the on-screen instructions. Note: The availability and appearance of the call log and voicemail box features may vary depending on the specific model and settings of the DECT 215 base station. If you have any further questions, feel free to ask.

How do I use the loudspeaker feature on the DECT 211 handset?

To use the loudspeaker feature on the DECT 211 handset, follow these steps: 1. During a call, locate the loudspeaker key on the handset. It is usually represented by an icon of a speakerphone or a loudspeaker. 2. Press the loudspeaker key to activate the loudspeaker mode. The call audio will now be transmitted through the loudspeaker instead of the earpiece. 3. Place the handset on a flat surface or hold it at a comfortable distance to ensure optimal sound quality. 4. To adjust the loudspeaker volume, use the volume key on the handset. Press the volume key up or down to increase or decrease the loudspeaker volume. 5. To switch back to the earpiece mode, press the loudspeaker key again. The call audio will now be heard through the earpiece as usual. Note: The loudspeaker feature allows for hands-free communication, making it convenient for conference calls or situations where you need to share the call with others in the room. If you have any further questions, feel free to ask.

How do I adjust the volume on the DECT 211 handset?

To adjust the volume on the DECT 211 handset, follow these steps: 1. During a call or when the handset is idle, locate the volume key on the handset. It is usually located on the side or front of the handset. 2. Press the volume key to increase or decrease the volume. Each press will adjust the volume level incrementally. 3. Continue pressing the volume key until you reach the desired volume level. The handset may emit a beep or provide visual feedback to indicate the volume level. 4. If you are using the loudspeaker feature, you can also adjust the volume specifically for the loudspeaker. Press the volume key while the loudspeaker is active to adjust its volume separately from the earpiece volume. Note: The DECT 211 handset offers three volume levels for both the earpiece and the loudspeaker. Make sure to adjust the volume to a comfortable level for clear and comfortable communication. Please let me know if you need any further assistance.

How do I register or unregister a handset with the DECT 215 base station?

To register or unregister a handset with the DECT 215 base station, follow these steps: 1. To register a handset, unplug the power adapter from the base station and then plug it back in to enter registration mode. 2. Once in registration mode, follow the instructions on the handset's display to complete the registration process. This may involve entering a registration code (RC code) that is written under the base station. 3. After entering the RC code, press the appropriate button to confirm and complete the registration process. The handset should now be successfully registered with the base station. 4. To unregister a handset, follow the same steps to enter registration mode by unplugging and plugging back in the power adapter. 5. Once in registration mode, enter the RC code for the handset you wish to unregister. This code is also written under the base station. 6. Press the appropriate button to confirm and unregister the handset. Please note that once unregistered, the handset will no longer be operational. It is important to ensure that any non-Philips handsets being registered are GAP compliant to ensure proper operation with the DECT 211 or DECT 215 base stations. Please let me know if you need any further assistance.

What do the screen icons on the DECT 211 base station indicate?

The screen icons on the DECT 211 base station indicate various functions and statuses. Here are the key screen icons and their meanings: 1. Caller's Number: This icon displays the caller's phone number if available. 2. Caller's Name: If the caller's name is known and stored in the phonebook or sent by the network, this icon will display the caller's name. 3. Stars: This icon represents an unidentified call. 4. Dashes: If the number is not recognized, this icon will display dashes. 5. New Message Indicator: This icon flashes when there is a new message on the voicemail box (subject to a subscription with your operator). 6. Battery Charge Status: This icon indicates the battery charge level, showing if it is charging, fully charged, or low. 7. Call Log: This icon represents the call log, where you can view the last 10 external calls received, including answered and unanswered calls, voicemail box service information, and messages from your answerphone (DECT 215 only). Please note that the specific icons may vary slightly depending on the model and configuration of the DECT 211 base station. If you have any further questions, feel free to ask.

How do I access the call log or voicemail box on the DECT 215 base station?

To access the call log or voicemail box on the DECT 215 base station, follow these steps: 1. On the DECT 215 base station, locate the "Call log / Voicemail Box" icon. It is usually represented by a phone receiver or an envelope symbol. 2. Press the corresponding button or navigate to the "Call log / Voicemail Box" option using the base station's menu navigation buttons. 3. Once you have accessed the call log or voicemail box, you will be able to view a list of recent calls or messages. Use the navigation buttons to scroll through the entries. 4. To listen to voicemail messages, select the desired message and press the appropriate button to play it back. Follow the on-screen instructions for further options, such as deleting or saving the message. 5. To view call details in the call log, select the desired entry and press the corresponding button. This will display information such as the caller's number, date, and time of the call. Please note that the specific steps may vary slightly depending on the model and configuration of the DECT 215 base station. If you have any further questions, feel free to ask.

How do I use the loudspeaker feature on the DECT 211 handset?

To use the loudspeaker feature on the DECT 211 handset, follow these steps: 1. During a call, locate the loudspeaker key on the DECT 211 handset. It is usually represented by an icon of a speakerphone or a loudspeaker. 2. Press the loudspeaker key to activate the loudspeaker mode. The call audio will now be routed through the loudspeaker instead of the earpiece. 3. Place the handset on a flat surface or hold it at a comfortable distance to ensure optimal sound quality. 4. Adjust the volume using the volume key on the handset to set the desired loudspeaker volume level. 5. To switch back to the earpiece mode, simply press the loudspeaker key again. The call audio will now be heard through the earpiece as usual. Please note that the loudspeaker feature allows for hands-free communication, but it is important to be mindful of the ambient noise and maintain a suitable distance from the handset for clear audio transmission. If you have any further questions, feel free to ask.

How do I access the phonebook on the Philips Dect 211 phone?

To access the phonebook on the Philips Dect 211 phone, follow these steps: 1. Press the "Phonebook" button on the handset. This will open the phonebook menu. 2. Use the navigation buttons (usually arrow keys) to scroll through the phonebook entries. 3. To view a specific entry, select it by pressing the corresponding button (e.g., the number or name associated with the entry). 4. If you want to edit an entry, select it and press the "Edit" or "Modify" button. Use the navigation buttons to make changes to the name or number, and press the "Save" or "OK" button to confirm the changes. 5. To delete an entry, select it and press the "Delete" or "Remove" button. Confirm the deletion when prompted. 6. You can also create a new entry by selecting the "Add" or "New" option in the phonebook menu. Enter the name and number using the keypad, and save the entry. Remember that the Philips Dect 211 phone has two phonebooks: a 20-entry family phonebook and a 20-entry friends phonebook. You can switch between these phonebooks using the corresponding options in the phonebook menu. Please note that the steps provided are based on the information available in the manual for the Philips Dect 211 phone.

Why is the battery charge status icon not showing on the base station screen of the Philips Dect 211 phone?

The battery charge status icon may not be showing on the base station screen of the Philips Dect 211 phone due to the following reasons: 1. Low Battery: If the battery charge is low, the battery charge status icon may not be displayed. Ensure that the handset is properly placed on the charging unit and allow it to charge for at least 24 hours. 2. Incorrect Placement: Make sure that the handset is correctly placed on the base station charging unit. If it is not placed properly, the battery charge status icon may not appear. 3. Dirty Charging Contacts: Check if the charging contacts on the handset and the base station are clean. If they are dirty, clean them using a clean and dry cloth. 4. Defective Battery Pack: If the battery icon remains empty even after charging for 24 hours, the handset's battery pack may be defective. In this case, please contact your Philips dealer to purchase a new rechargeable battery pack. Please note that these troubleshooting steps are specific to the Philips Dect 211 phone and are based on the information available in the manual.

How do I change the answerphone settings on the Philips Dect 211 phone?

To change the answerphone settings on the Philips Dect 211 phone, follow these steps: 1. Press the menu button on the handset to enter the programming mode. 2. Use the navigation buttons (usually arrow keys) to scroll through the menu options displayed on the screen. 3. Look for the "Answerphone Settings" option. It may be labeled differently depending on the model, but it should be related to the answerphone or voicemail feature. 4. Select the "Answerphone Settings" option by pressing the corresponding button. 5. Within the answerphone settings menu, you can customize various options such as the recording capacity, outgoing message, volume, and number of rings before the answerphone takes the call. 6. Use the navigation buttons to scroll through the available options and make your desired changes. 7. Press the OK or Save button to confirm your changes. Please note that the specific steps and options may vary slightly depending on the model and firmware version of the Philips Dect 211 phone.

What should I do if the handset is not registering with the base station of the Philips Dect 211 phone?

If the handset is not registering with the base station of the Philips Dect 211 phone, you can try the following steps: 1. Check the connections: Ensure that the base station is properly connected to the electricity supply and the telephone socket. 2. Move closer to the base station: If the handset is out of range, try moving closer to the base station and see if it registers. 3. Register the handset: If the handset is not registered with the base station, you need to enter the registration mode. Unplug and plug back in the power adapter to the electricity supply. Then, follow the instructions in the manual to register the handset to the base station. 4. Clean the charging contacts: If the handset is not placed correctly on the base station charging unit or if the charging contacts are dirty, take the handset off the base station and put it back again. Clean the charging contacts with a clean and dry cloth. 5. Defective battery pack: If the battery icon remains empty even after charging for 24 hours, the handset's battery pack may be defective. In this case, please contact your Philips dealer to purchase a new rechargeable battery pack. Please note that these troubleshooting steps are specific to the Philips Dect 211 phone and are based on the information available in the manual.

How do I use the paging key on the Philips Dect 211 phone?

To use the paging key on the Philips Dect 211 phone, follow these steps: 1. Locate the paging key on the handset. It is usually labeled as "Paging" or represented by a speaker icon. 2. Press and hold the paging key for a few seconds. This will activate the paging function. 3. While holding the paging key, speak into the handset's microphone. Your voice will be transmitted through the base station's speaker. 4. Release the paging key when you have finished speaking. Your message will be broadcasted through the base station's speaker, allowing others to hear it. Please note that the paging function is useful for locating a misplaced handset or making announcements to other users in the vicinity of the base station. It is important to speak clearly and directly into the handset's microphone for optimal sound quality during paging. These steps are specific to the Philips Dect 211 phone and are based on the information available in the manual.

Is the manual of the Philips Dect 211 available in English?

Yes, the manual of the Philips Dect 211 is available in English .

Is your question not listed? Ask your question here

No results