conrmation beep indicating that the base is now in
registration mode.
3 Enter the system PIN. Press REDIAL/C to
make corrections. Then press MENU/OK
to conrm the PIN.
»Registration is complete in less than 2
minutes. The base automatically assigns
a handset number to the handset.
Note
•If the PIN is incorrect or no base is found within a
certain period, a notication message will be displayed
on your handset.
•If registration fails, unplug the power adapter from the
base station and plug it back. Wait for 15 seconds, and
then repeat the registration procedure.
•The preset PIN is 0000. No change can be made on it.
Unregister the handsets
1 Press MENU/OK.
2 Select [Services] > [Unregister], then
press MENU/OK to conrm.
3 Enter the system PIN. (The preset PIN is
0000). Press REDIAL/C to remove the
number.
4 Select the handset to be unregistered.
5 Press MENU/OK to conrm.
»The handset is unregistered.
Tip
•The handset name is displayed beside the handset
number in standby mode.
Note
•A handset cannot unregister itself.
Restore default settings
You can reset your phone settings to the
original factory settings.
1 Press MENU/OK.
2 Select [Services] > [Reset], then press
MENU/OK to conrm.
»A conrmation request is displayed on
the handset.
3 Press MENU/OK to conrm.
»All settings (except the phonebook
and direct access keys information) are
reset.
View the manual for the Philips D5352S here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 6.1. This manual is available in the following languages: English. Do you have a question about the Philips D5352S or do you need help? Ask your question here
Need help?
Do you have a question about the Philips and is the answer not in the manual?
Question and answer
Number of questions: 0