26 EN
Activate/deactivate the remote access Y ou can allow or b lock remote access to the
answering machine .
1 Press or MENU/OK > [Answ . Machine]
2 Select [Remote access] , then press MENU/OK to conrm.
3 Select [Activate] /[Deactivate] , then press
MENU/OK to conrm.
» The setting is sav ed.
Change the PIN code 1 Press or MENU/OK > [Answ . Machine].
2 Select [Remote access] > [Change PIN] ,
then press MENU/OK to conrm.
3 Enter the old PIN, then press MENU/OK to conrm.
4 Enter the new PIN code, then press MENU/OK to conrm.
5 Enter the new PIN code again, then press MENU/OK to conrm.
» The setting is sav ed.
Access the answering machine remotely 1 Make a call to your home number with a touch tone phone .
2 Enter # when you hear the announcement. 3 Enter your PIN code. » Y ou now ha ve access to y our
answering machine , and you can now
listen to the new messages.
Note
• Y ou ha ve 2 chances to enter the correct PIN code
before your phone hangs up .
4 Press a key to carry out a function. See the Remote access commands table belo w for
a list of availab le functions.
Note
• When there is no message, the phone hangs up
automatically if no key is pressed for 8 seconds.
Remote access commands
Key Function
1 Listen to the previous message .
2 Listen to messages.
3 Skip to the next message .
6 Delete the current message .
7 Switch the answering machine on
(not availab le when y ou listen to the
messages).
8 Stop listening to the message .
9 Switch the answering machine off.
(not availab le when y ou listen to the
messages).
Behavior of the LED display on the base station The table belo w shows y ou the current status
with different LED displa y behavior on the base
station.
LED
display
Message status
Steady on • There is no new message and
the memor y is not full.
• The handset is on.
• Enter the paging mode .
Flashing • There is a new message and the
memor y is not full.
• There is an incoming call.
• Recording an incoming mes -
sage/announcement.
• Listen to messages.
• Remote access/listen to mes-
sages from the handset.
Flashing
(Fast)
• There is a new or no new mes-
sage and the memor y is full.
• Enter the registration mode .
Need help?
Do you have a question about the Philips and is the answer not in the manual?
Question and answer
Number of questions: 0