Philips D400 manual

Philips D400
9.4 · 1
PDF manual
 · 48 pages
English
manualPhilips D400
29
English
EN
Tip
When you access the answering machine remotely,
you are recommended to set the ring delay to [Toll
saver] mode. This is a cost effective way to manage
your messages. When there are new messages, the
answering machine picks up the call after 3 rings; When
there is no messages, it picks up the call after 5 rings.

Remote access

You can operate your answering machine when
you are away from home. Simply make a call to
your phone with a touch tone phone and enter
your 4-digit PIN code.
Note
The remote access PIN code is the same as your
system PIN. The preset PIN is 0000.

Activate/deactivate the remote access

You can allow or block remote access to the
answering machine.

1 Press MENU/OK.

2 Select [Answ. Machine] > [Remote

access], then press MENU/OK to conrm.
3 Select [Activate]/[Deactivate], then press
MENU/OK to conrm.
» The setting is saved.

Change the PIN code

For information, see 'Change the remote access
PIN code' in the 'Get started' section.

Access the answering machine

remotely

1 Make a call to your home number with a

touch tone phone.

2 Enter # when you hear the announcement.

3 Enter your PIN code.

» You now have access to your
answering machine, and you can now
listen to the new messages.
Note
You have 2 chances to enter the correct PIN code
before your phone hangs up.

4 Press a key to carry out a function. See the

Remote access commands table below for
a list of available functions.
Note
When there is no message, the phone hangs up
automatically if no key is pressed for 8 seconds.
Remote access commands
Key Function
1 Repeat the current or listen to the
previous message.
2 Listen to messages.
3 Skip to the next message.
6 Delete the current message.
7 Switch the answering machine on.
(not available when you listen to the
messages).
8 Stop listening to the message.
9 Switch the answering machine off.
(not available when you listen to the
messages).

View the manual for the Philips D400 here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 9.4. This manual is available in the following languages: English. Do you have a question about the Philips D400 or do you need help? Ask your question here

Need help?

Do you have a question about the Philips and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
A
Ann SailesMay 15, 2024

The screen on our Philips D400/D405 phone has gone blank. Have fitted new batteries but screen still blank.

The Philips D400 phone is a communication device with a phonebook capacity of up to 100 entries, allowing users to store their contacts conveniently. It features multi-base capability, allowing the connection of one base to multiple handsets, enabling users to access their phone in different locations within their premises. Equipped with a 550 mAh battery capacity, the phone offers a decent battery life for prolonged use without the need for frequent recharging. The device also includes a redial list capacity of 20, allowing users to easily access recently dialed numbers with just a few button presses. The Philips D400 phone boasts 20 buttons that allow users to effortlessly navigate through various functions and settings. Additionally, it offers a speakerphone functionality, enabling hands-free calling for increased convenience. To provide users with a hassle-free experience, the phone features a battery charge indicator, notifying users when the battery needs to be recharged. With a power consumption of only 0.7 W, the device is designed to minimize energy usage. With a package weight of 572 kg, the phone is lightweight and easy to handle. It comes with a package depth of 59 mm, package height of 136 mm, and package width of 184 mm, making it compact and space-efficient. The Philips D400 phone also includes an alarm clock feature, allowing users to set reminders or wake up to their desired time. Furthermore, it offers a selection of 10 melodies for personalized ringtone preferences. In conclusion, the Philips D400 phone is a feature-rich communication device with an ample capacity for phonebook entries, multi-base functionality, and convenient features such as a speakerphone and battery charge indicator. With its lightweight design and compact dimensions, it offers users a reliable and user-friendly communication experience.

General
BrandPhilips
ModelD400 | D4001W/77
Productphone
EAN8712581665531
LanguageEnglish
FiletypeUser manual (PDF)
Phone features
Phonebook capacity100 entries
Multi base capability1
SpeakerphoneYes
Multi handset capability4
Microphone muteYes
Power
Battery capacity550 mAh
Power consumption (typical)0.7 W
Standby time250 h
Battery recharge time8 h
Battery technologyNickel-Metal Hydride (NiMH)
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Talk time16 h
Call management
Redial list capacity20
Caller IDYes
Call waitingYes
Design
Buttons quantity20
Mounting typeDesk
Product colorWhite
Elderly phone-
Other features
Package weight572 kg
Clock/Date displayYes
Signal strength indicationYes
Indication
Battery charge indicatorYes
LED indicatorsYes
Battery full indicationYes
Battery low indicationYes
Voicemail indicationYes
Battery capacity indicatorYes
Weight & dimensions
Package depth59 mm
Package height136 mm
Package width184 mm
Cable length1.8 m
Package weight466 g
Management features
Alarm clockYes
Clock with calendarYes
Programmable hot keysYes
Performance
Number of melodies10
IntercomYes
TypeDECT telephone
Sound enhancement technologyHQ-Sound, MySound
Ringer typePolyphonic
ECO modeYes
GAP compatibleYes
Answering machineNo
Maximum indoor range50 m
Maximum outdoor range300 m
Certificates
Specific absorption rate (SAR) value (EU)0.1 W/kg
Display
Built-in displayYes
DisplayFSTN
Display diagonal1.8 "
Backlight colorAmber
Backlight displayYes
Packaging content
Number of handsets included1
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Philips D400 below.

What is the screen size of the Philips D400?

The screen size of the Philips D400 is 1.8 ".

How long does it take to charge the battery of the Philips D400?

It takes 8 h to charge the battery of the Philips D400.

How do I insert a SIM card into the Philips D400 phone?

To insert a SIM card into the Philips D400 phone, locate the SIM card slot on the side of the device. Gently insert the SIM card into the designated slot, ensuring it is properly aligned with the contacts. Be careful not to force the card into place.

Can I expand the storage capacity of my Philips D400 phone?

Yes, you can expand the storage capacity of your Philips D400 phone. It supports the use of a microSD card, which can be inserted into the dedicated memory card slot. This allows you to store more files, such as photos, videos, and music, on your device.

How do I change the language settings on my Philips D400?

To change the language settings on your Philips D400 phone, navigate to the "Settings" menu. Then, select "Language & Input" or a similar option, depending on your specific device model. From there, you can choose the desired language from the available list.

How can I set up a Wi-Fi connection on my Philips D400?

To set up a Wi-Fi connection on your Philips D400 phone, go to the "Settings" menu and select "Wi-Fi" or a similar option. Ensure that the Wi-Fi toggle switch is turned on, then select your preferred Wi-Fi network from the list of available networks. Enter the Wi-Fi password if prompted, and your device will connect to the Wi-Fi network.

How can I perform a factory reset on my Philips D400 phone?

To perform a factory reset on your Philips D400 phone, go to the "Settings" menu and select "System" or a similar option. Choose "Reset" or "Backup & Reset," then select "Factory data reset." Confirm your selection, and the device will reset to its original factory settings, erasing all data and personalization. Make sure to back up any important data before proceeding with a factory reset.

Does the Philips D400 have a phonebook capacity?

Yes, the Philips D400 has a phonebook capacity of 100 entries. This means that the user can store up to 100 contacts in their phonebook.

Can the Philips D400 connect to multiple bases?

No, the Philips D400 can only connect to one base. This means that the user cannot expand their phone system with multiple bases.

Does the Philips D400 have a speakerphone?

Yes, the Philips D400 has a speakerphone. This means that the user can have hands-free conversations without needing to hold the phone up to their ear.

Does the Philips D400 have a battery charge indicator?

Yes, the Philips D400 has a battery charge indicator. This means that the user can easily see the current battery level of their phone.

Does the Philips D400 have LED indicators?

Yes, the Philips D400 has LED indicators. This means that the user can receive visual notifications for incoming calls or messages.

Is the manual of the Philips D400 available in English?

Yes, the manual of the Philips D400 is available in English .

Is your question not listed? Ask your question here

No results