Philips D200 manual

Philips D200
8.5 · 3
PDF manual
 · 42 pages
English
manualPhilips D200
27
English
EN

Set the ring delay

You can set the number of times the phone
rings before the answering machine picks up
the call.

1 Press MENU/OK.

2 Select [Answ. Machine] > [Ring delay],
then press MENU/OK to conrm.

3 Select a new setting, then press MENU/

OK to conrm.
» The setting is saved.
Note
Make sure that the answering machine is switched on
before this feature can be applied.
Tip
When you access the answering machine remotely,
you are recommended to set the ring delay to [Toll
saver] mode. This is a cost effective way to manage
your messages. When there are new messages, the
answering machine picks up the call after 3 rings; When
there is no messages, it picks up the call after 5 rings.

Remote access

You can operate your answering machine when
you are away from home. Simply make a call to
your phone with a touch tone phone and enter
your 4-digit PIN code.
Note
The remote access PIN code is the same as your
system PIN. The preset PIN is 0000.

Activate/deactivate the remote access

You can allow or block remote access to the
answering machine.

1 Press MENU/OK.

2 Select [Answ. Machine] > [Remote

access], then press MENU/OK to conrm.
3 Select [On]/[Off], then press MENU/OK
to conrm.
» The setting is saved.

Change the PIN code

For information, see 'Change the remote access
PIN code' in the 'Get started' section.

Access the answering machine

remotely

1 Make a call to your home number with a

touch tone phone.

2 Enter # when you hear the announcement.

3 Enter your PIN code.

» You now have access to your
answering machine, and you can now
listen to the new messages.
Note
You have 2 chances to enter the correct PIN code
before your phone hangs up.

4 Press a key to carry out a function. See the

Remote access commands table below for
a list of available functions.
Note
When there is no message, the phone hangs up
automatically if no key is pressed for 8 seconds.

View the manual for the Philips D200 here, for free. This manual comes under the category phones and has been rated by 3 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Philips D200 or do you need help? Ask your question here

Need help?

Do you have a question about the Philips and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Philips D200 phone comes with a cable length of 1.8 meters, allowing for flexible placement within your space. With a phonebook capacity of up to 50 entries, you can easily store and access your contacts. The phone also features multi base capability for added convenience. The battery capacity of 550 mAh ensures a decent amount of usage time before needing to recharge. You can choose from 10 different melodies for your ringtones, and the redial list can store up to 10 previous numbers dialed. The package dimensions of the Philips D200 are as follows: 80 millimeters in depth, 136 millimeters in height, and 185 millimeters in width. The phone has a power consumption of 0.7 watts under typical usage. Additionally, it has a speakerphone function and a built-in display with a diagonal measurement of 1.6 inches. The package weight of the Philips D200 is 432 grams, making it easy to transport and handle.

General
BrandPhilips
ModelD200 | D2001B/77
Productphone
EAN8712581664589
LanguageEnglish
FiletypeUser manual (PDF)
Weight & dimensions
Cable length1.8 m
Package depth80 mm
Package height136 mm
Package width185 mm
Package weight432 g
Base weight329 g
Phone features
Phonebook capacity50 entries
Multi base capability1
SpeakerphoneYes
Microphone muteYes
Multi handset capability4
Power
Battery capacity550 mAh
Power consumption (typical)0.7 W
Battery recharge time8 h
Talk time16 h
Standby time180 h
Battery technologyNickel-Metal Hydride (NiMH)
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Display
Backlight colorAmber
Built-in displayYes
Display diagonal1.6 "
Backlight displayYes
Performance
Number of melodies10
IntercomYes
Maximum outdoor range300 m
Maximum indoor range50 m
GAP compatibleYes
ECO modeYes
TypeDECT telephone
Answering machineNo
Ringer typePolyphonic
Call management
Redial list capacity10
Caller IDYes
Call waitingYes
Other features
Signal strength indicationYes
Clock/Date displayYes
Indication
Battery charge indicatorYes
Battery capacity indicatorYes
LED indicatorsYes
Management features
Programmable hot keysYes
Design
Product colorBlack
Mounting typeDesk
Elderly phone-
Packaging content
Number of handsets included1
Certificates
Specific absorption rate (SAR) value (EU)0.1 W/kg
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Philips D200 below.

What is the screen size of the Philips D200?

The screen size of the Philips D200 is 1.6 ".

How long does it take to charge the battery of the Philips D200?

It takes 8 h to charge the battery of the Philips D200.

How do I set up the phone for the first time?

To set up the Philips D200 phone for the first time, ensure that the power cord is connected and then insert the batteries in the handset and base. Place the handset on the base to charge. Once fully charged, you can proceed with the initial setup by following the on-screen instructions.

How can I adjust the ringer volume?

To adjust the ringer volume on your Philips D200 phone, press the up or down arrow keys located on the side of the handset while the phone is in standby mode. You can press the up arrow to increase the volume or the down arrow to decrease it. Keep adjusting until you find the desired volume level.

How do I make a call with the Philips D200?

Making a call with your Philips D200 phone is simple. Lift the handset or press the speaker button if you wish to use the loudspeaker function. Then, using either the number keypad or the phonebook, dial the desired number. Press the call button (green phone icon) to initiate the call. Remember to include the country or area code if necessary.

Can I block unwanted calls?

Yes, you can block unwanted calls on the Philips D200 phone. Go to the menu by pressing the menu button (represented by three horizontal lines) on the handset. Navigate to the settings menu and then find the call settings option. Within the call settings, you should find a call blocking or call barring feature. Enable this feature and follow the instructions to block specific numbers.

How can I check my voicemail messages?

To check your voicemail messages on the Philips D200 phone, press and hold the number 1 key on the handset keypad. This will automatically dial your voicemail service. Follow the prompts provided by your service provider to listen to your voicemail messages. Remember to set up your voicemail service and personalize your voicemail greeting if you haven't done so already.

What is the phonebook capacity of Philips D200?

The phonebook capacity of Philips D200 is 50 entries. This means that the user can store up to 50 contacts in their phonebook.

Does Philips D200 have multi base capability?

No, Philips D200 does not have multi base capability. This means that the user can connect only one base unit to the phone.

What is the battery capacity of Philips D200?

The battery capacity of Philips D200 is 550 mAh. This indicates that the phone has a moderate battery capacity, which should be sufficient for normal daily usage.

How many melodies does Philips D200 have?

Philips D200 has 10 melodies. This provides the user with a decent selection of ringtones to choose from.

What is the package height of Philips D200?

The package height of Philips D200 is 136 mm. This indicates that the package is of average size and should be easy to handle and store.

Is the manual of the Philips D200 available in English?

Yes, the manual of the Philips D200 is available in English .

Is your question not listed? Ask your question here

No results