Philips CD230 manual

Philips CD230
6 · 1
PDF manual
 · 35 pages
English
manualPhilips CD230
14
EN

Calling from the phonebook

1. Press DOWN to directly acces the phonebook.
2. Press the UP / DOWN to search for the record that you would like to dial.
3. Press .

Ending a call

Press or place the handset on the base unit or charger.

Answering a call

When you receive a call, the phone will ring and will flash on the display.
Press to answer the call.

Answering a call in hands free mode

The handsfree feature enables you to talk to the caller without holding onto the phone. It also allows others
in the room to join in the conversation.
Press to turn the loudspeaker on/off during a call.

Call in progress

Setting the earpiece volume

You can increase or reduce the volume of a caller’s voice during a call. There are 3 different volume levels.
Press UP / DOWN to adjust the receiver or loudspeaker volume.
Note : You can use the number keys to jump directly to the record starting with the corresponding
letters of that key. For example, press 2 to search for records starting with A.
If the number has more than 12 digits, press to view off screen digits, and press once more
to view the first 12 digits again.
Note : If a caller ID record is received (subscription needed), turns on and the caller information
is displayed. When the phone is ringing, you can press to turn the ringer off for this incoming call.
Note : appears to indicate the loudspeaker is on.
Warning ! Handsfree activation could suddenly increase the volume in the loudspeaker to a very high
level. Make sure the handset is not too close to your ear.
Call

View the manual for the Philips CD230 here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 6. This manual is available in the following languages: English. Do you have a question about the Philips CD230 or do you need help? Ask your question here

Need help?

Do you have a question about the Philips and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandPhilips
ModelCD230 | CD2301B/79
Productphone
EAN8712581361709
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF), Datasheet (PDF)
Power
Number of batteries supported2
Battery capacity650 mAh
AC input voltage220 - 240 V
AC input frequency50 Hz
Battery typeAAA
Talk time10 h
Standby time120 h
Call management
Caller IDYes
Call log entries20
Call waitingYes
Caller ID on call waitingYes
Call blockingYes
Weight & dimensions
Base dimensions125 x 118 x 56 mm
Handset dimensions (WxDxH)154 x 50 x 29 mm
Display
Display number of lines2 lines
Backlight colorAmber
Backlight displayYes
Built-in displayYes
DisplayCSTN
Display number of colorsMonochrome
Indication
Battery charge indicatorYes
Other features
Signal strength indicationYes
Phone features
Phonebook capacity50 entries
Microphone muteYes
SpeakerphoneYes
Multi base capability4
Multi handset capability4
Paging functionYes
DialingTone/Pulse
Performance
Type-
Answering machineNo
IntercomNo
Maximum indoor range50 m
Ringer typePolyphonic
GAP compatibleYes
Maximum outdoor range300 m
Design
Product colorBlack
Mounting typeDesk
Elderly phone-
Integrated antennaYes
Ports & interfaces
Wireless connection-
Management features
Volume controlDigital
Alarm clockYes
Packaging content
Number of handsets included1
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Philips CD230 below.

Does the Philips CD230 support caller ID?

Yes, the Philips CD230 supports caller ID. This means that the user will be able to see the incoming caller's number or name on the phone's display, allowing them to easily identify who is calling.

What is the battery capacity of the Philips CD230?

The battery capacity of the Philips CD230 is 650 mAh. This indicates the amount of charge that the battery can hold. A higher battery capacity generally means a longer battery life for the user.

Does the Philips CD230 have a backlight display?

Yes, the Philips CD230 has a backlight display. This means that the screen will be illuminated, making it easier for the user to read the information displayed, especially in low-light conditions.

Does the Philips CD230 have a battery charge indicator?

Yes, the Philips CD230 has a battery charge indicator. This feature allows the user to easily monitor the battery level of the phone, ensuring that they never run out of battery unexpectedly.

What is the phonebook capacity of the Philips CD230?

The phonebook capacity of the Philips CD230 is 50 entries. This means that the user can store up to 50 phone numbers in the phonebook, making it convenient for them to quickly access and dial their contacts.

How can I troubleshoot if the Philips CD230 phone is not working properly?

To troubleshoot if the Philips CD230 phone is not working properly, you can follow these steps: 1. Check the power supply: Ensure that the phone is properly connected to the power source and that the power cable is securely plugged into the base station. If the phone is not turning on, try using a different power outlet or replacing the power cable. 2. Verify the battery: If the phone is not charging or not holding a charge, check the battery. Make sure it is properly inserted into the handset and that it is not damaged or worn out. If necessary, replace the battery with a new one. 3. Check the phone line connection: Ensure that the telephone cable is securely connected to both the base station and the telephone wall socket. If there is no dial tone or if the phone is not connecting to the line, try using a different telephone cable or testing the line with another phone. 4. Reset the phone: If the phone is experiencing software or performance issues, try resetting it. Disconnect the power cable from the base station, remove the batteries from the handset, and wait for a few minutes. Then, reconnect the power cable and reinsert the batteries. 5. Contact customer support: If the troubleshooting steps above do not resolve the issue, it is recommended to contact Philips customer support for further assistance. They can provide specific troubleshooting guidance or arrange for repairs if necessary. Remember to refer to the Philips CD230 phone's user manual for detailed instructions and illustrations specific to your device.

What should I do if the Philips CD230 phone is not charging?

If the Philips CD230 phone is not charging, you can try the following steps: 1. Check the battery: Ensure that the battery is properly inserted into the handset and that it is not damaged or worn out. If necessary, replace the battery with a new one. 2. Verify the power connection: Make sure that the power cable is securely plugged into the base station and the power outlet. Try using a different power outlet or power cable to rule out any issues with the power source. 3. Clean the charging contacts: Sometimes, dirt or debris can accumulate on the charging contacts of the handset or base station, preventing proper charging. Gently clean the charging contacts using a soft, dry cloth. 4. Reset the phone: If the phone is still not charging, try resetting it. Disconnect the power cable from the base station, remove the batteries from the handset, and wait for a few minutes. Then, reconnect the power cable and reinsert the batteries. 5. Contact customer support: If the troubleshooting steps above do not resolve the issue, it is recommended to contact Philips customer support for further assistance. They can provide specific troubleshooting guidance or arrange for repairs if necessary. Please note that these steps are general troubleshooting suggestions and may vary depending on the specific issue with your Philips CD230 phone.

How can I troubleshoot if the Philips CD230 phone is not connecting to the base station?

To troubleshoot if the Philips CD230 phone is not connecting to the base station, you can follow these steps: 1. Check the power and telephone connections: Ensure that the power cable is securely plugged into the base station and the power outlet. Also, make sure that the telephone cable is properly connected to both the base station and the telephone wall socket. 2. Reset the phone and base station: Disconnect the power cable from the base station and remove the batteries from the handset. Wait for a few minutes, then reconnect the power cable and reinsert the batteries. This will reset the phone and base station, which can help resolve connection issues. 3. Verify the registration process: If the handset is not registered with the base station, follow the registration process outlined in the manual. Press and hold the PAGING button on the base station for 4 seconds, then press the OK button on the handset to initiate the registration process. 4. Ensure proximity to the base station: Make sure that the handset is within range of the base station. Keep the handset close to the base station during the registration process and while using the phone. 5. Contact customer support: If the troubleshooting steps above do not resolve the issue, it is recommended to contact Philips customer support for further assistance. They can provide specific troubleshooting guidance or arrange for repairs if necessary. Please note that these steps are general troubleshooting suggestions and may vary depending on the specific issue with your Philips CD230 phone.

What should I do if the Philips CD230 phone is not ringing when there is an incoming call?

To troubleshoot if the Philips CD230 phone is not ringing when there is an incoming call, you can try the following steps: 1. Check the ringer volume: Make sure that the ringer volume is not set to the lowest level or muted. Press the volume up button on the handset to increase the ringer volume. 2. Verify the ringtone selection: Ensure that a ringtone is selected for incoming calls. Access the phone's settings menu and navigate to the ringtone options. Choose a desired ringtone and save the settings. 3. Check the handset settings: Confirm that the handset is not set to silent mode or do not disturb mode. Access the handset settings menu and disable any silent or do not disturb settings. 4. Reset the phone: If the issue persists, try resetting the phone. Disconnect the power cable from the base station, remove the batteries from the handset, and wait for a few minutes. Then, reconnect the power cable and reinsert the batteries. 5. Contact customer support: If the troubleshooting steps above do not resolve the issue, it is recommended to contact Philips customer support for further assistance. They can provide specific troubleshooting guidance or arrange for repairs if necessary. Please note that these steps are general troubleshooting suggestions and may vary depending on the specific issue with your Philips CD230 phone.

How can I troubleshoot if the Philips CD230 phone is not displaying the caller ID?

To troubleshoot if the Philips CD230 phone is not displaying the caller ID, you can try the following steps: 1. Check caller ID service: Ensure that you have subscribed to caller ID service with your telephone service provider. Contact your provider to confirm if the service is active on your phone line. 2. Verify handset settings: Make sure that the caller ID feature is enabled on your handset. Access the phone's settings menu and navigate to the caller ID options. Enable the caller ID feature if it is disabled. 3. Check phone line connection: Ensure that the telephone cable is securely connected to both the base station and the telephone wall socket. A loose or faulty connection can affect the caller ID functionality. Try using a different telephone cable to rule out any issues with the cable. 4. Reset the phone: If the issue persists, try resetting the phone. Disconnect the power cable from the base station, remove the batteries from the handset, and wait for a few minutes. Then, reconnect the power cable and reinsert the batteries. 5. Contact customer support: If the troubleshooting steps above do not resolve the issue, it is recommended to contact Philips customer support for further assistance. They can provide specific troubleshooting guidance or arrange for repairs if necessary. Please note that these steps are general troubleshooting suggestions and may vary depending on the specific issue with your Philips CD230 phone.

Is the manual of the Philips CD230 available in English?

Yes, the manual of the Philips CD230 is available in English .

Is your question not listed? Ask your question here

No results