View the manual for the Philips CD230 here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 6. This manual is available in the following languages: English. Do you have a question about the Philips CD230 or do you need help? Ask your question here


| Brand | Philips |
| Model | CD230 | CD2301B/79 |
| Product | phone |
| EAN | 8712581361709 |
| Language | English |
| Filetype | User manual (PDF), Quickstart Guide (PDF), Datasheet (PDF) |
| Number of batteries supported | 2 |
| Battery capacity | 650 mAh |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Battery type | AAA |
| Talk time | 10 h |
| Standby time | 120 h |
| Caller ID | Yes |
| Call log entries | 20 |
| Call waiting | Yes |
| Caller ID on call waiting | Yes |
| Call blocking | Yes |
| Base dimensions | 125 x 118 x 56 mm |
| Handset dimensions (WxDxH) | 154 x 50 x 29 mm |
| Display number of lines | 2 lines |
| Backlight color | Amber |
| Backlight display | Yes |
| Built-in display | Yes |
| Display | CSTN |
| Display number of colors | Monochrome |
| Battery charge indicator | Yes |
| Signal strength indication | Yes |
| Phonebook capacity | 50 entries |
| Microphone mute | Yes |
| Speakerphone | Yes |
| Multi base capability | 4 |
| Multi handset capability | 4 |
| Paging function | Yes |
| Dialing | Tone/Pulse |
| Type | - |
| Answering machine | No |
| Intercom | No |
| Maximum indoor range | 50 m |
| Ringer type | Polyphonic |
| GAP compatible | Yes |
| Maximum outdoor range | 300 m |
| Product color | Black |
| Mounting type | Desk |
| Elderly phone | - |
| Integrated antenna | Yes |
| Wireless connection | - |
| Volume control | Digital |
| Alarm clock | Yes |
| Number of handsets included | 1 |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Philips CD230 below.
Yes, the Philips CD230 supports caller ID. This means that the user will be able to see the incoming caller's number or name on the phone's display, allowing them to easily identify who is calling.
The battery capacity of the Philips CD230 is 650 mAh. This indicates the amount of charge that the battery can hold. A higher battery capacity generally means a longer battery life for the user.
Yes, the Philips CD230 has a backlight display. This means that the screen will be illuminated, making it easier for the user to read the information displayed, especially in low-light conditions.
Yes, the Philips CD230 has a battery charge indicator. This feature allows the user to easily monitor the battery level of the phone, ensuring that they never run out of battery unexpectedly.
The phonebook capacity of the Philips CD230 is 50 entries. This means that the user can store up to 50 phone numbers in the phonebook, making it convenient for them to quickly access and dial their contacts.
To troubleshoot if the Philips CD230 phone is not working properly, you can follow these steps: 1. Check the power supply: Ensure that the phone is properly connected to the power source and that the power cable is securely plugged into the base station. If the phone is not turning on, try using a different power outlet or replacing the power cable. 2. Verify the battery: If the phone is not charging or not holding a charge, check the battery. Make sure it is properly inserted into the handset and that it is not damaged or worn out. If necessary, replace the battery with a new one. 3. Check the phone line connection: Ensure that the telephone cable is securely connected to both the base station and the telephone wall socket. If there is no dial tone or if the phone is not connecting to the line, try using a different telephone cable or testing the line with another phone. 4. Reset the phone: If the phone is experiencing software or performance issues, try resetting it. Disconnect the power cable from the base station, remove the batteries from the handset, and wait for a few minutes. Then, reconnect the power cable and reinsert the batteries. 5. Contact customer support: If the troubleshooting steps above do not resolve the issue, it is recommended to contact Philips customer support for further assistance. They can provide specific troubleshooting guidance or arrange for repairs if necessary. Remember to refer to the Philips CD230 phone's user manual for detailed instructions and illustrations specific to your device.
If the Philips CD230 phone is not charging, you can try the following steps: 1. Check the battery: Ensure that the battery is properly inserted into the handset and that it is not damaged or worn out. If necessary, replace the battery with a new one. 2. Verify the power connection: Make sure that the power cable is securely plugged into the base station and the power outlet. Try using a different power outlet or power cable to rule out any issues with the power source. 3. Clean the charging contacts: Sometimes, dirt or debris can accumulate on the charging contacts of the handset or base station, preventing proper charging. Gently clean the charging contacts using a soft, dry cloth. 4. Reset the phone: If the phone is still not charging, try resetting it. Disconnect the power cable from the base station, remove the batteries from the handset, and wait for a few minutes. Then, reconnect the power cable and reinsert the batteries. 5. Contact customer support: If the troubleshooting steps above do not resolve the issue, it is recommended to contact Philips customer support for further assistance. They can provide specific troubleshooting guidance or arrange for repairs if necessary. Please note that these steps are general troubleshooting suggestions and may vary depending on the specific issue with your Philips CD230 phone.
To troubleshoot if the Philips CD230 phone is not connecting to the base station, you can follow these steps: 1. Check the power and telephone connections: Ensure that the power cable is securely plugged into the base station and the power outlet. Also, make sure that the telephone cable is properly connected to both the base station and the telephone wall socket. 2. Reset the phone and base station: Disconnect the power cable from the base station and remove the batteries from the handset. Wait for a few minutes, then reconnect the power cable and reinsert the batteries. This will reset the phone and base station, which can help resolve connection issues. 3. Verify the registration process: If the handset is not registered with the base station, follow the registration process outlined in the manual. Press and hold the PAGING button on the base station for 4 seconds, then press the OK button on the handset to initiate the registration process. 4. Ensure proximity to the base station: Make sure that the handset is within range of the base station. Keep the handset close to the base station during the registration process and while using the phone. 5. Contact customer support: If the troubleshooting steps above do not resolve the issue, it is recommended to contact Philips customer support for further assistance. They can provide specific troubleshooting guidance or arrange for repairs if necessary. Please note that these steps are general troubleshooting suggestions and may vary depending on the specific issue with your Philips CD230 phone.
To troubleshoot if the Philips CD230 phone is not ringing when there is an incoming call, you can try the following steps: 1. Check the ringer volume: Make sure that the ringer volume is not set to the lowest level or muted. Press the volume up button on the handset to increase the ringer volume. 2. Verify the ringtone selection: Ensure that a ringtone is selected for incoming calls. Access the phone's settings menu and navigate to the ringtone options. Choose a desired ringtone and save the settings. 3. Check the handset settings: Confirm that the handset is not set to silent mode or do not disturb mode. Access the handset settings menu and disable any silent or do not disturb settings. 4. Reset the phone: If the issue persists, try resetting the phone. Disconnect the power cable from the base station, remove the batteries from the handset, and wait for a few minutes. Then, reconnect the power cable and reinsert the batteries. 5. Contact customer support: If the troubleshooting steps above do not resolve the issue, it is recommended to contact Philips customer support for further assistance. They can provide specific troubleshooting guidance or arrange for repairs if necessary. Please note that these steps are general troubleshooting suggestions and may vary depending on the specific issue with your Philips CD230 phone.
To troubleshoot if the Philips CD230 phone is not displaying the caller ID, you can try the following steps: 1. Check caller ID service: Ensure that you have subscribed to caller ID service with your telephone service provider. Contact your provider to confirm if the service is active on your phone line. 2. Verify handset settings: Make sure that the caller ID feature is enabled on your handset. Access the phone's settings menu and navigate to the caller ID options. Enable the caller ID feature if it is disabled. 3. Check phone line connection: Ensure that the telephone cable is securely connected to both the base station and the telephone wall socket. A loose or faulty connection can affect the caller ID functionality. Try using a different telephone cable to rule out any issues with the cable. 4. Reset the phone: If the issue persists, try resetting the phone. Disconnect the power cable from the base station, remove the batteries from the handset, and wait for a few minutes. Then, reconnect the power cable and reinsert the batteries. 5. Contact customer support: If the troubleshooting steps above do not resolve the issue, it is recommended to contact Philips customer support for further assistance. They can provide specific troubleshooting guidance or arrange for repairs if necessary. Please note that these steps are general troubleshooting suggestions and may vary depending on the specific issue with your Philips CD230 phone.
Yes, the manual of the Philips CD230 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Philips and is the answer not in the manual?
Question and answer
Number of questions: 0