View the manual for the Philips CD1453B here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 5.9. This manual is available in the following languages: English. Do you have a question about the Philips CD1453B or do you need help? Ask your question here
| Brand | Philips |
| Model | CD1453B | CD1453B/19 |
| Product | phone |
| EAN | 8712581313913, 8712581323189, 8712581347413 |
| Language | English |
| Filetype | User manual (PDF), Quickstart Guide (PDF) |
| Multi base capability | 1 |
| Speakerphone | - |
| Microphone mute | Yes |
| Multi handset capability | 4 |
| Paging function | Yes |
| Dialing | Tone/Pulse |
| Phonebook capacity | 20 entries |
| Battery capacity | 550 mAh |
| Number of batteries supported | 2 |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Battery type | AAA |
| Talk time | 12 h |
| Standby time | 120 h |
| Battery technology | Nickel-Metal Hydride (NiMH) |
| Base dimensions | 116 x 110 x 81 mm |
| Handset dimensions (WxDxH) | 48 x 24 x 160 mm |
| Backlight display | No |
| Display number of colors | Monochrome |
| Built-in display | Yes |
| Display | TN |
| Battery charge indicator | Yes |
| LED indicators | Yes |
| Signal strength indication | Yes |
| Plug and Play | Yes |
| Wireless connection | Yes |
| Type | - |
| Answering machine | Yes |
| Recording time | 15 min |
| Intercom | No |
| Ringer type | Polyphonic |
| Maximum outdoor range | 300 m |
| Product color | Black |
| Mounting type | Desk |
| Elderly phone | - |
| Integrated antenna | Yes |
| Caller ID | Yes |
| Conference call | Yes |
| Call log entries | 10 |
| Call waiting | Yes |
| Explicit call transfer | Yes |
| Call blocking | Yes |
| Volume control | Digital |
| Number of handsets included | 3 |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Philips CD1453B below.
Yes, the Philips CD1453B has a battery charge indicator, which is convenient for users to know when to recharge the phone.
Yes, the Philips CD1453B comes with an answering machine feature with a recording time of 15 minutes, providing users with the ability to receive and store messages.
No, the Philips CD1453B only has a multi-base capability of 1, which means users can only connect one base station.
No, the Philips CD1453B does not have a backlight display, which may make it slightly less visible in low light conditions compared to phones with a backlight display.
No, the Philips CD1453B does not have an intercom feature, which may be a drawback for users who require intercom functionality in their home phone system.
To take a second call during a conversation on the Philips CD1453B phone: 1. Press the "Flash" button to put the current call on hold. 2. Enter the number for the second call and establish the connection. 3. When the second call is answered, you can switch between the two calls by pressing the "Flash" button. 4. To answer a second call while already in a conversation, press the "Flash" button when you hear a short tone. 5. The first call will be automatically put on hold, allowing you to switch between the two calls using the "Flash" button. 6. Remember that the handset stores the five most recently dialed numbers for easy access.
To view the call timer display on the Philips CD1453B phone, follow these steps: 1. Look at the phone display while the phone is in use. The call timer display will be shown. 2. The call timer display will blink when there is an incoming call. 3. The call timer display will also blink when a new voicemail message is received and not yet played. 4. While browsing the call list, the call timer display will be visible. It will blink after missed calls. 5. When browsing the phonebook, the call timer display will be shown. 6. The call timer display will appear when the phone is in the phone settings mode. 7. It will also be shown when the keypad is locked, the microphone is muted, the ringer is turned off, or the answering machine is enabled. It will blink when a new message is received on the answering machine. 8. The call timer display will indicate that the handset is registered and within range of the base station. It will blink if the handset is out of range or searching for a base.
To end a call on the Philips CD1453B phone, follow these steps: 1. During a call, press the button to mute the microphone. The display will show that the microphone is muted. 2. Press the button again to unmute the microphone. 3. If you want to adjust the speaker volume during the call, press the corresponding button to select the desired level. 4. To end a call and return to the standby mode, press the button on the handset of the caller. 5. If you are in a conference call, press the button to put the external call on hold and switch back to the internal call. 6. Press and hold the button to resume the conference call. Note that if a handset disconnects during a conference call, the connection between the other handset and the external caller will remain active.
To disconnect a call on the Philips CD1453B phone, follow these steps: 1. During a call, press the button to mute the microphone. The display will show that the microphone is muted. 2. Press the button again to unmute the microphone. 3. If you want to adjust the speaker volume during the call, press the corresponding button to select the desired level. 4. To end the call, press and hold the button on the handset that initiated the call. 5. If you are in a conference call, press the button to put the external call on hold and switch back to the internal call. 6. To resume the conference call, press and hold the button. 7. Note that if one handset disconnects during a conference call, the connection between the other handset and the external caller will remain active.
Yes, the manual of the Philips CD1453B is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Philips and is the answer not in the manual?
Question and answer
Number of questions: 0