Philips Azur Advanced OptimalTEMP GC4938 manual

Philips Azur Advanced OptimalTEMP GC4938
8.8 · 3
PDF manual
 · 30 pages
English
manualPhilips Azur Advanced OptimalTEMP GC4938
EN To use KO 사용법 TH ในการใช้งาน TC 使用 SC 使用
ID Penggunaan MS Untuk menggunakan
EN Quick Calc Release (Specic types only) KO 빠른 석회질 제거 (특정 모델만 해당)
TH Quick Calc Release (
เฉพาะบางรุ่นเท่านั้น
) TC 一秒除鈣裝置(限特定機型)
SC Quick Calc Release(仅限于特定型号) ID Quick Calc Release (hanya tipe tertentu)
MS Pelepas Kerak Pantas (jenis tertentu sahaja)
EN Calc Clean KO 석회질 제거 (특정 모델만 해당) TH ระบบขจัดตะกรัน (
เฉพาะบางรุ่น
เท่านั้น
) TC 鈣化清洗(限特定機型) SC 清除水垢(仅限于特定型号) ID Calc Clean
(hanya tipe tertentu) MS Bersih Kerak (jenis tertentu sahaja)
EN To store KO 보관법 TH ในการจัดเก็บ TC 儲存 SC 存放
ID Penyimpanan MS Untuk menyimpan
1
2
1-9
1-1
1-8
1-7
~2 min.
3-6
3-5
~2 min.
2-32-2
2-5
3
3-2 3-4
3-9
3-11 3-12
3-7
3-10
3-8

1 2 3 4 5

6
7
8
10
9
1-6
1-10
1-5
1-2
1-3
3-32-4
2-72-6
2-9
2-8
~30 sec.
2-1
~30 sec.
3-1
4
4-1
4-2
4-3
4-4
3
1-4
2-11
2-10
1
2
1-9
1-1
1-8
1-7
~2 min.
3-6
3-5
~2 min.
2-32-2
2-5
3
3-2 3-4
3-9
3-11 3-12
3-7
3-10
3-8

1 2 3 4 5

6
7
8
10
9
1-6
1-10
1-5
1-2
1-3
3-3
2-4
2-72-6
2-9
2-8
~30 sec.
2-1
~30 sec.
3-1
4
4-1
4-2
4-3
4-4
3
1-4
2-11
2-10
1 2
1-9
1-1
1-8
1-7
~2 min.
3-6
3-5
~2 min.
2-32-2
2-5
3
3-2 3-4
3-9
3-11 3-12
3-7
3-10
3-8

1 2 3 4 5

6
7
8
10
9
1-6
1-10
1-5
1-2
1-3
3-3
2-4
2-72-6
2-9
2-8
~30 sec.
2-1
~30 sec.
3-1
4
4-1
4-2
4-3
4-4
3
1-4
2-11
2-10

View the manual for the Philips Azur Advanced OptimalTEMP GC4938 here, for free. This manual comes under the category irons and has been rated by 3 people with an average of a 8.8. This manual is available in the following languages: English. Do you have a question about the Philips Azur Advanced OptimalTEMP GC4938 or do you need help? Ask your question here

Need help?

Do you have a question about the Philips and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 3
R
Rosalyn August 6, 2021

Hi, my Philip azur advanced iron keeps blinking with blue light and not hot at all. May in know why?

Hi, my Philip azur advanced iron keeps blinking with blue light and not hot at all. May in know why?
zoom-in
View photo
O
Orinda HalaOctober 2, 2020

Is there any way to open the iron? Because since it appear the red light calc clean and I made the calc clean, it does not work anymore. It does not get hot. Can I get a help in here?

L
Linda RazakSeptember 14, 2020

Why is my iron not hot

The Philips Azur Advanced OptimalTEMP GC4938 is an iron that offers efficient and effective performance for ironing tasks. With a water tank capacity of 0.33 liters, it allows for longer ironing sessions without the need for frequent refills. The continuous steam performance of 55 grams per minute ensures smooth and wrinkle-free results. Featuring a vertical steam function, the iron allows for steaming garments directly on the hanger, making it convenient for quick touch-ups. The anti-drip function prevents any water from dripping onto the fabric, avoiding any potential for stains or damage. The iron is designed with an extra-large water inlet, making it easier to fill and reducing the chance of spills or splashes. With a power output of 3000 watts, it provides sufficient heat to quickly remove wrinkles from clothes. The iron's cord length is 3 meters, offering flexibility and convenience during ironing sessions, especially when the power outlet is located further away. The auto shut-off feature ensures safety by turning off the iron automatically when it is left unattended for a certain period of time. Overall, the Philips Azur Advanced OptimalTEMP GC4938 is a reliable and efficient iron that provides convenient features for achieving wrinkle-free results. Its design and specifications make it suitable for various ironing tasks, offering durability and ease of use.

General
BrandPhilips
ModelAzur Advanced OptimalTEMP GC4938 | GC4938/20
Productiron
EAN0871010382880, 0871010382881, 0871010383103, 1871010383103, 8710103831037, 18710103831034, 8710103828815, 8710103828808, 8710103860327
LanguageEnglish
FiletypeUser manual (PDF)
Features
Water tank capacity0.33 L
Continuous steam performance55 g/min
Vertical steam functionYes
Soleplate typeT-ionicGlide soleplate
Anti-drip functionYes
Extra large water inletYes
Auto shut-offYes
Water tank capacity0.33 L
Continuous steam performance55 g/min
Vertical steam functionYes
Soleplate typeT-ionicGlide soleplate
Anti-drip functionYes
Product colorBlue
TypeSteam iron
CordlessNo
Designed for travelNo
Steam boost functionYes
Variable steamYes
Steam boost performance240 g/min
Cord length3 m
Stable heel restYes
Calc-clean functionYes
Continuous steamYes
Auto power offYes
Automatic anti-calcNo
Filling opening sizeExtra large
User manual recycled paperYes
Other features
Power3000 W
Extra large water inletYes
Ergonomics
Cord length3 m
Non-twisting cordNo
Power
Iron power3000 W
Packaging content
ManualYes
Weight & dimensions
Width333 mm
Depth135 mm
Height175 mm
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Philips Azur Advanced OptimalTEMP GC4938 below.

What does the wattage on my iron say?

A high wattage iron heats up faster.

How do I remove stains on the soleplate?

Soak a cloth in vinegar and put your iron on the cloth for half an hour so that the vinegar can absorb into the stains. You can then remove the stains with a damp cloth.

Can I use tap water in my iron?

Yes, irons are in principle only suitable for tap water.

What is the height of the Philips Azur Advanced OptimalTEMP GC4938?

The Philips Azur Advanced OptimalTEMP GC4938 has a height of 175 mm.

What is the width of the Philips Azur Advanced OptimalTEMP GC4938?

The Philips Azur Advanced OptimalTEMP GC4938 has a width of 333 mm.

What is the depth of the Philips Azur Advanced OptimalTEMP GC4938?

The Philips Azur Advanced OptimalTEMP GC4938 has a depth of 135 mm.

What is the water tank capacity of Philips Azur Advanced OptimalTEMP GC4938?

The water tank capacity of Philips Azur Advanced OptimalTEMP GC4938 is 0.33 L. This means that the user will have a decent amount of water capacity for continuous ironing without the need for frequent refills.

Does Philips Azur Advanced OptimalTEMP GC4938 have a vertical steam function?

Yes, Philips Azur Advanced OptimalTEMP GC4938 has a vertical steam function. This allows the user to easily remove creases from hanging garments or curtains, providing convenience and versatility.

Does Philips Azur Advanced OptimalTEMP GC4938 have an anti-drip function?

Yes, Philips Azur Advanced OptimalTEMP GC4938 has an anti-drip function. This feature prevents water leakage and ensures that no water stains are left on the fabric, enhancing the overall ironing experience for the user.

Does Philips Azur Advanced OptimalTEMP GC4938 have a steam boost function?

Yes, Philips Azur Advanced OptimalTEMP GC4938 has a steam boost function. With a steam boost performance of 240 g/min, this iron provides powerful steam bursts to tackle stubborn wrinkles and enables efficient ironing even on thicker fabrics.

Is Philips Azur Advanced OptimalTEMP GC4938 a cordless iron?

No, Philips Azur Advanced OptimalTEMP GC4938 is not a cordless iron. This means that the user will need to have a power outlet nearby for operation, but it ensures continuous power supply and eliminates the need to recharge or replace batteries.

How do I register my Philips Azur Advanced OptimalTEMP GC4938 iron for support?

To register your Philips Azur Advanced OptimalTEMP GC4938 iron for support, follow these steps: 1. Visit the Philips website at www.philips.com/welcome. 2. Look for the registration section on the website. 3. Fill in the required information, such as your name, email address, and product details. 4. Provide the necessary information about your Philips Azur Advanced OptimalTEMP GC4938 iron, such as the model number and purchase date. 5. Complete any additional fields or questions that may be required for registration. 6. Double-check all the information you have entered to ensure its accuracy. 7. Submit the registration form. 8. You will receive a confirmation message or email indicating that your registration has been successful. 9. Keep a record of your registration details for future reference. By following these steps, you can easily register your Philips Azur Advanced OptimalTEMP GC4938 iron for support.

What are the different parts of the Philips Azur Advanced OptimalTEMP GC4938 iron and their functions?

The Philips Azur Advanced OptimalTEMP GC4938 iron consists of several parts, each serving a specific function. Here are the different parts and their functions: 1. Water tank lid: This is where you fill the iron with water for steam generation during ironing. 2. Steam slider: This slider allows you to control the steam output of the iron. Slide it to the "Steam on" position to enable steam and to the "Steam off" position to disable steam. 3. Steam boost button: Press and hold this button to release an extra burst of steam for removing stubborn creases. 4. 'Iron ready' light: This light indicates when the iron has reached the desired temperature for ironing. 5. Calc-Clean / Quick Calc Release reminder light: This light flashes to remind you to perform the Quick Calc Release function to remove collected scales from the iron. 6. Mains cord: The power cord that connects the iron to the electrical outlet. 7. Cord winding: This feature allows you to neatly wrap the cord around the iron for easy storage. 8. Calc-Clean button (specific types only): This button activates the Calc-Clean function for cleaning the iron and removing scale deposits. 9. Soleplate: The flat, heated surface of the iron that comes into direct contact with the fabric. 10. Quick Calc Release (specific types only): This function collects loose scale particles during ironing and can be used to remove scales and prolong the life of the iron. By understanding the different parts and their functions, you can effectively use the Philips Azur Advanced OptimalTEMP GC4938 iron for your ironing needs.

Why is my Philips Azur Advanced OptimalTEMP GC4938 iron emitting smoke when I use it for the first time?

When using the Philips Azur Advanced OptimalTEMP GC4938 iron for the first time, it is normal for the iron to emit some smoke. This is due to the initial heating of the internal components and any residual manufacturing substances. The smoke should dissipate after a short while of use. To address this issue, follow these steps: 1. Ensure that the iron is properly plugged into a power source and turned on. 2. Allow the iron to heat up for a few minutes until the "iron ready" light stops blinking and remains steady. 3. Place the iron in an upright position on a heat-resistant surface. 4. Press the steam boost button a few times to release any trapped air or residual substances. 5. Wait for the smoke to dissipate and for the iron to reach the desired temperature for ironing. It is important to note that if the smoke persists or if you notice any unusual smells or signs of malfunction, discontinue use and contact Philips customer support for further assistance. By following these steps, you can safely use your Philips Azur Advanced OptimalTEMP GC4938 iron without any concerns about the initial smoke emission.

Can I use any type of water with the Philips Azur Advanced OptimalTEMP GC4938 iron?

The Philips Azur Advanced OptimalTEMP GC4938 iron is designed to be used with tap water. However, if you live in an area with hard water, it is recommended to use distilled or demineralized water to prevent fast scale build-up and prolong the lifetime of the appliance. It is important not to use perfumed water, water from the tumble dryer, vinegar, starch, descaling agents, ironing aids, chemically descaled water, or other chemicals, as they may cause water spitting, brown staining, or damage to the iron. By using the appropriate type of water, you can ensure optimal performance and longevity of your Philips Azur Advanced OptimalTEMP GC4938 iron.

How do I prevent scale build-up in my Philips Azur Advanced OptimalTEMP GC4938 iron when using hard water?

To prevent scale build-up in your Philips Azur Advanced OptimalTEMP GC4938 iron when using hard water, follow these steps: 1. Perform regular Calc-Clean maintenance: After 1 to 3 months of use, the Calc-Clean reminder light will start flashing. This indicates that it's time to perform the Calc-Clean function to remove scales and prolong the life of your iron. Follow these steps for Calc-Clean: a. Make sure the steam slider is set to the "steam off" position. b. Ensure there is enough water in the water tank. c. Wait for the iron to heat up, then unplug it. d. Hold the iron over a sink and push the Calc-Clean button while gently shaking the iron to flush out scales. e. Repeat the process if necessary. f. Plug in the iron and let it heat up to dry the soleplate. 2. Use distilled or demineralized water: If you live in an area with hard water, it is recommended to use distilled or demineralized water instead of tap water. This helps reduce scale build-up and maintain the performance of your iron. By following these steps, you can effectively prevent scale build-up in your Philips Azur Advanced OptimalTEMP GC4938 iron when using hard water.

How do I register my Philips Azur Advanced OptimalTEMP GC4938 iron for support?

To register your Philips Azur Advanced OptimalTEMP GC4938 iron for support, follow these steps: 1. Visit the Philips website (www.philips.com) on your computer or mobile device. 2. Navigate to the "Support" section of the website. 3. Look for the "Product Registration" or "Register Your Product" option. 4. Click on the option to register your product. 5. Fill in the required information, such as your name, email address, and product details. 6. Provide the necessary details about your Philips Azur Advanced OptimalTEMP GC4938 iron, such as the model number and purchase date. 7. Double-check the information you entered to ensure its accuracy. 8. Submit the registration form. 9. You will receive a confirmation email with the registration details. 10. Keep the confirmation email or note down the registration number for future reference. By following these steps, you can easily register your Philips Azur Advanced OptimalTEMP GC4938 iron for support.

What are the different parts of the Philips Azur Advanced OptimalTEMP GC4938 iron and their functions?

The Philips Azur Advanced OptimalTEMP GC4938 iron consists of several parts, each serving a specific function. Here are the different parts and their functions: 1. Water tank lid: This lid covers the water tank of the iron, allowing you to fill it with water for steam generation. 2. Steam slider: The steam slider controls the flow of steam from the iron. You can slide it to the "Steam on" position to enable steam or to the "Steam off" position to disable steam. 3. Steam boost button: This button provides an extra burst of steam for removing stubborn creases from fabrics. 4. 'Iron ready' light: This light indicates when the iron has reached the desired temperature for ironing. 5. Calc-Clean / Quick Calc Release reminder light: This light flashes to remind you to perform the Quick Calc Release function to remove collected scales from the iron. 6. Mains cord: The mains cord is the power cord that connects the iron to the electrical outlet. 7. Cord winding: This feature allows you to neatly wrap and store the mains cord when not in use. 8. Calc-Clean button (specific types only): This button activates the Calc-Clean function for cleaning the iron and removing scale deposits. 9. Soleplate: The soleplate is the flat, heated surface of the iron that comes into direct contact with the fabric during ironing. 10. Quick Calc Release (specific types only): This function collects loose scale particles during ironing and can be used to remove scales and prolong the life of the iron. By understanding the different parts and their functions, you can effectively use and maintain your Philips Azur Advanced OptimalTEMP GC4938 iron.

Why is my Philips Azur Advanced OptimalTEMP GC4938 iron emitting smoke when I use it for the first time?

When using the Philips Azur Advanced OptimalTEMP GC4938 iron for the first time, it is normal for the iron to emit some smoke. This is a temporary occurrence and will stop after a short while. The smoke is a result of the initial heating of the iron's components and does not indicate a malfunction or safety concern. To address this issue, you can follow these steps: 1. Allow the iron to heat up for a few minutes before using it for the first time. 2. Ensure that the room is well-ventilated to allow any smoke to dissipate. 3. If the smoke persists for an extended period or has a strong odor, unplug the iron and contact Philips customer support for further assistance. Remember, the smoke during the initial use is a normal part of the iron's operation and should not cause any harm. However, if you have any concerns or the smoke continues beyond the initial use, it is always best to seek guidance from the manufacturer's customer support team.

Can I use any type of water with the Philips Azur Advanced OptimalTEMP GC4938 iron?

The Philips Azur Advanced OptimalTEMP GC4938 iron is designed to be used with tap water. However, if you live in an area with hard water, it is recommended to use distilled or demineralized water to prevent fast scale build-up and prolong the lifetime of the appliance. It is important to note that using perfumed water, water from the tumble dryer, vinegar, starch, descaling agents, ironing aids, chemically descaled water, or other chemicals is not recommended as they may cause water spitting, brown staining, or damage to the appliance. By using tap water or distilled/demineralized water as recommended, you can ensure optimal performance and longevity of your Philips Azur Advanced OptimalTEMP GC4938 iron.

How do I prevent scale build-up in my Philips Azur Advanced OptimalTEMP GC4938 iron when using hard water?

To prevent scale build-up in your Philips Azur Advanced OptimalTEMP GC4938 iron when using hard water, you can follow these steps: 1. Perform regular Calc-Clean maintenance: After 1 to 3 months of use, the Calc-Clean reminder light will start flashing. This indicates that it's time to use the Calc-Clean function to remove scales and prolong the life of your iron. Follow these steps: a. Make sure the steam slider is set to the "steam off" position. b. Ensure there is enough water in the water tank. c. Wait for the iron to heat up, then unplug it. d. Hold the iron over a sink and push the Calc-Clean button while gently shaking the iron to flush out scales. e. Plug in the iron and let it heat up to dry the soleplate. 2. Use distilled or demineralized water: If you live in an area with hard water, it is recommended to use distilled or demineralized water instead of tap water. This helps reduce scale build-up and maintain the performance of your iron. By following these steps and using the appropriate water, you can effectively prevent scale build-up in your Philips Azur Advanced OptimalTEMP GC4938 iron and ensure its optimal performance.

Is the manual of the Philips Azur Advanced OptimalTEMP GC4938 available in English?

Yes, the manual of the Philips Azur Advanced OptimalTEMP GC4938 is available in English .

Is your question not listed? Ask your question here

No results