Philips 50PFL5704 manual

Philips 50PFL5704
7.4 · 1
PDF manual
 · 79 pages
English
manualPhilips 50PFL5704

Troubleshooting tips

If the unit does not perform properly when operated as instructed in this manual,

Please check the following Troubleshooting tips and all connections once before calling for service.

Power
No power
Make sure the AC power cord is plugged in.
Make sure that the AC outlet supplies the proper voltage, plug another
electrical appliance into the AC outlet to ensure that the AC outlet operates
normally.
If a power failure occurs, unplug the AC power cord for 1 minute to allow the
unit to reset itself.
Remote
Control buttons do not work.
Do NOT press more than one button at the same time.
Ensure that no buttons on the remote are depressed and move freely.
Re-insert or replace the AAA batteries with their polarities (+/–) as indicated
on the remote battery area.
Universal remote does not work properly.
Refer to the user manual of the universal remote for the Philips code.
The Google Assistant microphone on the remote does not work.
To pair the remote, refer to the step “6 Connecting your devices” in the Quick
start guide and see “How to connect to your Bluetooth® devices”.
Performance
Remote response is delayed or sluggish during initial use.
Your television is automatically, downloading and installing the latest
applications, for the best user experience.
During this time, you may experience a delayed response from your remote.
Upon successful installation, your remote will operate normally.
Accessibility
Television is speaking prompts out-loud.
To enable or disable the talkback (text to speech) on your television, press
x
(HOME) on your remote, navigate to settings (found in the upper right
corner of the home screen) and select accessibility, select talkback, press
OK to toggle between on or off.
Picture
Power is on but screen image is off.
Check if the connection for your source device is properly secured.
Check if the correct input is selected by pressing
w
(INPUT).
Verify that your HDMI mode, for the input selected matches the resolution
output of your source device.
Change source input until you have picture and sound.
Sound
No sound is heard when using the HDMI digital connection.
Some HDMI cables and devices may not be compatible with the TV due to
different HDMI specifications.
No sound, distorted sound or incorrect audio sound is heard when using the
HDMI-DVI connections.
Make sure that the analog audio signals from the HDMI-DVI device are
connected to the analog audio input L/R jacks.
When using Composite analog video, make sure that the analog audio
(L/R) connectors are mounted into the audio (L/R) input jacks.
No sound from Soundbar / Home theater using an HDMI cable.
Please check to be sure the device is connected to the HDMI 2 (ARC) input
on the TV.
Sound intermittent or no sound.
Check if the audio cable is connected into the unit correctly.
You switch to a different input and the volume changes.
This unit will memorize the volume level from the last time you adjusted it.
If the volume of the sound from another device is higher or lower, then the
loudness will change.
Make sure Auto Volume Control is set to On.
L p. 29
Picture & Sound
No sound with distorted picture occurs when using the HDMI digital
connection.
Some HDMI cables and devices may not be compatible with the TV due to
different HDMI specifications.
No picture or sound
Check if the power is on.
Check whether all the cables to the unit are connected to the correct output
jack on your separate device like Blu-ray Disc™ / DVD recorder.
View other TV channels. The problem might be limited to the broadcasting
station or weak signal strength.
Unplug the AC power cord and wait for about 1 minute, then plug the AC
power cord and turn on the unit again.
Check whether the connection of the antenna or cable / satellite set-top
box is connected correctly.
Make sure that the selected input mode is connected to the working input
jack.
Make sure that the sound is not muted. Press
2
(MUTE) so that the volume
bar and current volume level will appear on the TV screen.
Make sure that the volume is NOT set to 0 or
2
(MUTE). If so, use VOL + / –
to adjust to the desired volume.
Make sure that the headphone is NOT connected to the headphone audio
output jack.
If there are issues with picture/color and/or sound when connecting an
external device using the HDMI port, please try switching the HDMI EDID
Version. (Refer to HDMI EDID Version L p. 15)
Adjusted Picture or Sound settings are not effective every time the unit is
turned on.
You need to turn off the Retail Mode setting. L p. 29 (Otherwise, the
settings you adjusted will not be memorized after the unit goes into standby
mode.)
You see a distorted picture or hear an unusual sound. (Analog TV - NTSC
signal)
You may be getting NTSC (Analog) TV signal (not HDTV signal) interference
from electrical appliances, automobiles, motorcycles or fluorescent lights.
Try moving the unit to another location to see if this is the cause of the
problem.
Ghosts, lines or streaks in picture.
Electrical interference from nearby appliances may affect picture quality.
View other TV channels. The problem might be limited to the broadcasting
station or weak signal strength.
Picture poor, sound intermittent or no sound
View other TV channels. The problem might be limited to the broadcasting
station or weak signal strength.
Screen
You switch to a different input and the screen size changes.
This unit will memorize the viewing mode from the last time you used the
particular input modes.
The display image does not cover the entire screen.
If you are watching TV or using the composite video or HDMI with 480i input,
select Picture format, and then switch to various screen modes. (Refer to
Picture format L p. 20)
Different color marks on the TV screen
View other TV channels. The problem might be limited to the broadcasting
station, missing data or pixelation due to weak signal strength.

34 .English

Continued on next page.

Manual

View the manual for the Philips 50PFL5704 here, for free. This manual comes under the category televisions and has been rated by 1 people with an average of a 7.4. This manual is available in the following languages: English. Do you have a question about the Philips 50PFL5704 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Philips and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Philips 50PFL5704 specifications

Below you will find the product specifications and the manual specifications of the Philips 50PFL5704.

General
BrandPhilips
Model50PFL5704 | 50PFL5704/F7
Producttelevision
EAN0609585252165
LanguageEnglish
FiletypeUser manual (PDF)
Display
Display diagonal49.5 "
Display resolution3840 x 2160 pixels
Response time9.5 ms
Supported video modes480i, 480p, 720p, 1080i, 1080p, 2160p
Display diagonal (metric)127 cm
HD type4K Ultra HD
Display technologyLED
Screen shapeFlat
Display brightness- cd/m²
Motion interpolation technology-
Contrast ratio (typical)5000:1
Viewing angle, vertical178 °
Viewing angle, horizontal178 °
Screen format adjustments4:3, 16:9
Native aspect ratio16:9
Audio
RMS rated power10 W
Number of speakers2
Power
Power consumption (standby)0.5 W
Power consumption (typical)130 W
AC input voltage120 V
AC input frequency60 Hz
Design
Panel mounting interface300 x 300 mm
Product colorBlack
On/off switch-
VESA mountingYes
Network
Bluetooth version4.2
Wi-FiYes
Ethernet LANYes
Wi-Fi standardsWi-Fi 5 (802.11ac)
BluetoothYes
Other features
3DNo
Built-in speaker(s)Yes
TV tuner
Tuner typeAnalog
Analog signal format systemNTSC
Digital signal format systemNot supported
Smart TV
Smart TVYes
Internet TVYes
Operating system installedAndroid
Performance
Teletext functionNo
High Dynamic Range (HDR) supportedNo
Ports & interfaces
HDMI ports quantity3
PC in (D-Sub)No
DVI portNo
DVI-D ports quantity0
Ethernet LAN (RJ-45) ports1
USB 2.0 ports quantity1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
Composite video in0
Component video (YPbPr/YCbCr) in0
Audio (L/R) in1
Headphone outputs1
Common interface (CI)No
Common interface Plus (CI+)No
S-Video inputs quantity0
Operational conditions
Operating temperature (T-T)5 - 40 °C
Weight & dimensions
Width (without stand)1135 mm
Depth (without stand)78.7 mm
Height (without stand)660.4 mm
Weight (without stand)9298 g
Width (with stand)1135 mm
Height (with stand)685.8 mm
Depth (with stand)223.5 mm
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Philips 50PFL5704 below.

What's the best viewing distance for my Philips television?

The ideal viewing distance for your Philips television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is the screen size of the Philips 50PFL5704?

The screen size of the Philips 50PFL5704 is 49.5 ".

What is the screen resolution of the display of the Philips 50PFL5704?

The screen resolution of the Philips 50PFL5704 is 3840 x 2160 pixels.

Is the manual of the Philips 50PFL5704 available in English?

Yes, the manual of the Philips 50PFL5704 is available in English .

Is your question not listed? Ask your question here

No results