Philips 50PFL5704 manual

Philips 50PFL5704
7.4 · 1
PDF manual
 · 79 pages
English
manualPhilips 50PFL5704

5 Useful tips

FAQ
Question Answer
My remote does not work.
What should I do?
Check the antenna or cable connection to the main unit.
Check the batteries on the remote.
Check if there is an obstacle between the infrared sensor window and the remote.
Test the IR signal output use IR signal check. L p. 36
If okay, then possible infrared sensor trouble.
Aim the remote directly at the infrared sensor window on the front of the unit.
Reduce the distance to the unit.
Re-insert or replace the AAA batteries with their polarities (+/–) as indicated on the remote battery
area.
When there is an infrared-equipped device such as PC near this unit, it may interrupt the remote
signal on this unit. Move the infrared-equipped device away from this unit, change the angle of the
device's infrared sensor or turn off the infrared communication function.
How come the initial setup appears every
time I turn on this unit?
Make sure to complete the initial setup before the unit goes into standby mode.
Why can I not watch some RF signal TV
programs?
The selected channel may not be broadcasting.
The selected channel cannot be viewed by the Parental Controls setting. L p. 23
The unit requires some kind of antenna input. An indoor antenna (Digital or VHF / UHF), an external
antenna (Digital or VHF / UHF) or an RF coaxial cable from your wall cable or set-top box needs to
be plugged into the unit.
How come there is no image from the
connected external devices?
Check if the correct input is selected by pressing
w
(INPUT). L p. 18
Check the antenna, cable or other input connection to the unit.
When I enter a channel number, why does
it change automatically?
Many digital channels have alternate channel numbers. The unit changes the numbers automatically
to the ones signifying the broadcasting station's channel number. These basic numbers used for the
previous analog broadcasts. (e.g., input digital ch# 30 automatically changes to digital ch# 8.1)
Why are captions not displayed entirely?
Or why are captions delayed behind the
dialog?
Closed captions that are delayed a few seconds behind the actual dialog are common for live
broadcasts. Most captioning production companies can display a dialog to maximum of 220 words
per minute. If a dialog exceeds that rate, selective editing is used to insure that the closed captions
remain up-to date with the current TV screen dialog.
How can I set the clock?
From the Android TV home screen, select Settings in the upper right of the screen.
Scroll down to Device Preferences and select Date & time.
Please set it automatically or manually.

33 .English

Continued on next page.

Manual

View the manual for the Philips 50PFL5704 here, for free. This manual comes under the category televisions and has been rated by 1 people with an average of a 7.4. This manual is available in the following languages: English. Do you have a question about the Philips 50PFL5704 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Philips and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Philips 50PFL5704 specifications

Below you will find the product specifications and the manual specifications of the Philips 50PFL5704.

General
BrandPhilips
Model50PFL5704 | 50PFL5704/F7
Producttelevision
EAN0609585252165
LanguageEnglish
FiletypeUser manual (PDF)
Display
Display diagonal49.5 "
Display resolution3840 x 2160 pixels
Response time9.5 ms
Supported video modes480i, 480p, 720p, 1080i, 1080p, 2160p
Display diagonal (metric)127 cm
HD type4K Ultra HD
Display technologyLED
Screen shapeFlat
Display brightness- cd/m²
Motion interpolation technology-
Contrast ratio (typical)5000:1
Viewing angle, vertical178 °
Viewing angle, horizontal178 °
Screen format adjustments4:3, 16:9
Native aspect ratio16:9
Audio
RMS rated power10 W
Number of speakers2
Power
Power consumption (standby)0.5 W
Power consumption (typical)130 W
AC input voltage120 V
AC input frequency60 Hz
Design
Panel mounting interface300 x 300 mm
Product colorBlack
On/off switch-
VESA mountingYes
Network
Bluetooth version4.2
Wi-FiYes
Ethernet LANYes
Wi-Fi standardsWi-Fi 5 (802.11ac)
BluetoothYes
Other features
3DNo
Built-in speaker(s)Yes
TV tuner
Tuner typeAnalog
Analog signal format systemNTSC
Digital signal format systemNot supported
Smart TV
Smart TVYes
Internet TVYes
Operating system installedAndroid
Performance
Teletext functionNo
High Dynamic Range (HDR) supportedNo
Ports & interfaces
HDMI ports quantity3
PC in (D-Sub)No
DVI portNo
DVI-D ports quantity0
Ethernet LAN (RJ-45) ports1
USB 2.0 ports quantity1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
Composite video in0
Component video (YPbPr/YCbCr) in0
Audio (L/R) in1
Headphone outputs1
Common interface (CI)No
Common interface Plus (CI+)No
S-Video inputs quantity0
Operational conditions
Operating temperature (T-T)5 - 40 °C
Weight & dimensions
Width (without stand)1135 mm
Depth (without stand)78.7 mm
Height (without stand)660.4 mm
Weight (without stand)9298 g
Width (with stand)1135 mm
Height (with stand)685.8 mm
Depth (with stand)223.5 mm
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Philips 50PFL5704 below.

What's the best viewing distance for my Philips television?

The ideal viewing distance for your Philips television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is the screen size of the Philips 50PFL5704?

The screen size of the Philips 50PFL5704 is 49.5 ".

What is the screen resolution of the display of the Philips 50PFL5704?

The screen resolution of the Philips 50PFL5704 is 3840 x 2160 pixels.

Is the manual of the Philips 50PFL5704 available in English?

Yes, the manual of the Philips 50PFL5704 is available in English .

Is your question not listed? Ask your question here

No results