Philips 50PFL5704 manual

Philips 50PFL5704
7.4 · 1
PDF manual
 · 79 pages
English
manualPhilips 50PFL5704

HDMI-ARC connection

HDMI-ARC allows you to use HDMI control to output TV audio directly
to a connected audio device, without the need for an additional digital
audio cable.
HDMI cable
Digital home theater
amplifier that supports
HDMI-ARC
HDMI 2 IN only
OUT
Note(s)
The HDMI 2 connector is HDMI Audio Return Channel (ARC) compliant. Use
it to output digital audio to an HDMI home theater system.
Be sure that the device is HDMI CEC and ARC compliant and that the TV is
connected to the device using an HDMI cable attached to HDMI-ARC
connectors.

HDMI EDID Version

If there are issues with picture/color and/or sound when connecting
an external device using the HDMI port, please try switching the HDMI
mode following the instructions below.
1
Press w (INPUT) to switch input device list.
2
Press y (OPTIONS) on your remote and navigate to Settings and
press OK.
3
Select Device Preferences and press OK.
4
Select Inputs and press OK.
5
Select HDMI EDID Version and press OK.
Note(s)
EDID 1.4 is used for legacy devices that can output in 2K or 4K @30 Hz.
EDID 2.0 is used for modern devices that can output 4K @ 60Hz and 4K
with HDR 10.

Digital audio output connection

If you connect this unit to an external digital audio device, you can
enjoy multi-channel audio like 5.1ch digital broadcasting sound.
Use a digital audio optical cable to connect the unit to external digital
audio devices.
Digital audio optical cable
Digital home theater
amplifier
IN
OUT

Composite analog video connection

Composite analog video connection offers standard picture quality
for video devices connected to the unit.
If you connect to the unit's composite video (VIDEO) input jack,
connect audio cables to the audio (L/R) input jacks. When the audio
is monaural, then only connect to the audio L input jack.
Video + Audio (L/R)
cables
DVD player
IN
OUT

Connecting the TV to the internet using an Ethernet

cable

Internet
LAN
Ethernet cable
Network provisioning
equipment
Note(s)
Please purchase shielded Ethernet cables at your local store and use them
when you connect to network equipment.
After connecting an Ethernet cable, set up necessary network settings.
Network & Internet L p. 22
Do not insert any cable other than an Ethernet cable to the Ethernet port to
avoid damaging the unit.
If your telecommunications equipment (modem, etc.) does not have
broadband router functions, connect a broadband router.
If your telecommunications equipment (modem, etc.) has broadband router
functions but there is no vacant port, then add a hub.
For a broadband router, use a router which supports 10BASE-T / 100BASE-
TX.
Do not connect your PC directly to the Ethernet port of this unit.

15 .English

Continued on next page.

Manual

View the manual for the Philips 50PFL5704 here, for free. This manual comes under the category televisions and has been rated by 1 people with an average of a 7.4. This manual is available in the following languages: English. Do you have a question about the Philips 50PFL5704 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Philips and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Philips 50PFL5704 specifications

Below you will find the product specifications and the manual specifications of the Philips 50PFL5704.

General
BrandPhilips
Model50PFL5704 | 50PFL5704/F7
Producttelevision
EAN0609585252165
LanguageEnglish
FiletypeUser manual (PDF)
Display
Display diagonal49.5 "
Display resolution3840 x 2160 pixels
Response time9.5 ms
Supported video modes480i, 480p, 720p, 1080i, 1080p, 2160p
Display diagonal (metric)127 cm
HD type4K Ultra HD
Display technologyLED
Screen shapeFlat
Display brightness- cd/m²
Motion interpolation technology-
Contrast ratio (typical)5000:1
Viewing angle, vertical178 °
Viewing angle, horizontal178 °
Screen format adjustments4:3, 16:9
Native aspect ratio16:9
Audio
RMS rated power10 W
Number of speakers2
Power
Power consumption (standby)0.5 W
Power consumption (typical)130 W
AC input voltage120 V
AC input frequency60 Hz
Design
Panel mounting interface300 x 300 mm
Product colorBlack
On/off switch-
VESA mountingYes
Network
Bluetooth version4.2
Wi-FiYes
Ethernet LANYes
Wi-Fi standardsWi-Fi 5 (802.11ac)
BluetoothYes
Other features
3DNo
Built-in speaker(s)Yes
TV tuner
Tuner typeAnalog
Analog signal format systemNTSC
Digital signal format systemNot supported
Smart TV
Smart TVYes
Internet TVYes
Operating system installedAndroid
Performance
Teletext functionNo
High Dynamic Range (HDR) supportedNo
Ports & interfaces
HDMI ports quantity3
PC in (D-Sub)No
DVI portNo
DVI-D ports quantity0
Ethernet LAN (RJ-45) ports1
USB 2.0 ports quantity1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
Composite video in0
Component video (YPbPr/YCbCr) in0
Audio (L/R) in1
Headphone outputs1
Common interface (CI)No
Common interface Plus (CI+)No
S-Video inputs quantity0
Operational conditions
Operating temperature (T-T)5 - 40 °C
Weight & dimensions
Width (without stand)1135 mm
Depth (without stand)78.7 mm
Height (without stand)660.4 mm
Weight (without stand)9298 g
Width (with stand)1135 mm
Height (with stand)685.8 mm
Depth (with stand)223.5 mm
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Philips 50PFL5704 below.

What's the best viewing distance for my Philips television?

The ideal viewing distance for your Philips television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is the screen size of the Philips 50PFL5704?

The screen size of the Philips 50PFL5704 is 49.5 ".

What is the screen resolution of the display of the Philips 50PFL5704?

The screen resolution of the Philips 50PFL5704 is 3840 x 2160 pixels.

Is the manual of the Philips 50PFL5704 available in English?

Yes, the manual of the Philips 50PFL5704 is available in English .

Is your question not listed? Ask your question here

No results