4. Select the proper water level according to the quantity of clothes.
5. Select the functions and programs.
6. Press "Preset" button to select the starting time of washing.
7. Press "Start/Pause" button and close the lid.
Preset
Method of use of "preset" button
Confirmation of the preset
After the preset starting, the corresponding light will be turned on, the display digit shows the washing
machine starting time.
After starting preset, you can press the preset button continuously to check the preset status, then loose the
preset button, the program returns to preset status, if you open the lid now, the washing machine will alarm.
9
10
WAY OF USE
The light will move in turn as per press.
Self program
Functions
Soak
Wash
Single
wash
Features and usage of the programs
The time and flows for soak, wash, rinse and
spin are different from each other, it is
applicable when the water temperature is very
low in winter and the clothes are very dirty.
The time and flows for single wash of the 5
programs are different from each other, and it
does not drain after the end of wash, it is
applicable when the cleansing solution is used
for two times.
Wash
Rinse
The flows, washing time, rinse times of 5 wash
and rinse programs are different from each other
and it does not drain after the end of rinse,
applicable for the case of clothes need not
spinning.
Rinse
spin
Spin
The rinse times and the spinning time of 5 rinse
spin programs are different from each other,
applicable for pre-washing seriously stained
clothes.
The spin time of 5 programs are different from
each other, applicable for drain the residual
water or only for spinning the wet clothes.
Way of use
Step1-step4 are the same as those of the full
automatic programs
Step5: Press "wash" button one time, the soak
wash light is on.
Step6: Press program to select the program
which needed.
Step7: Press start/pause button, the washing
machine will start, press this button again in the
operation, the washing machine will pause.
Function indication
The corresponding lights and design to the process "Soak"
"Wash" "Rinse" "Spinning" are all turned on, and the light
corresponding to "Soak" will flash after the start.
The light and design corresponding to "Wash" will be turned on,
and it will flash after the start.
The light and desgin corresponding to "Wash" and "Rinse" will
be turned on, and the light corresponding to "wash" will flash
after the start.
The light design corresponding to "Rinse" and "Spin" will be
turned on, and the light corresponding to "Rinse" will flash after
the start.
The light and design corresponding to "Spin" will be turned on, and
the light corresponding to "Spinning" will flash after the start.
Soak
Wash
Water injection
Soak
Wash
Rinse
Rinse for the first time
Rinse for the second time
Spin
Drain
Water injection
Rinse
DrainDrainDrain
DrainDrain
Drain
Drain
Drain
SpinSpin
Spin
Spin
Spin
Spin
Spin
Spin
Spin
Water injection
Rinse
RinseRinse
Rinse
Rinse
Water injection
Water injection
Water injection
Water injection
Water injectionWater injection
Wash
Wash
Step5: Press rinse button 3 times, and the
rinse light is off, press spin button the spin
light is off. The other steps are same as top
step.
Step5: Press the spin button 3 times, the
spin light is off. The others steps are same
as the top steps.
Step5: Press the wash 4 times, and the wash
light is off, press the spin button 3 times, and
the spin light is off. The others steps are
same as the top steps.
Step5: Press the wash button 4 times, and
the wash light is off. The others steps are
same as the top steps.
Step 5: Press the wash button 4 times, and the
wash light is off, press the rinse button 3 times,
and the rinse light is off. The others steps are
same as the top steps.
The light and design corresponding to "Rinse" will be turned on,
and the light corresponding to "Rinse" will flash after the start.
Drain
Spin
Water injection
Rinse
Drain
Spin
Water injection
Rinse
1. Press wash button, the indicator light move in turns, and select wash 12 minutes, soak wash, wash 6 minutes, wash 9 minutes, all lights turning off means no washing course, the details of soak wash program see page 11.
2. Press the rinse button the indicator light move in turn, and corresponding to select rinse to times, injection rinse, rinse one times, all lights turning off means no rinsing course.
3. Press the spin button the indicator light move in turn, and corresponding to select to spin 5 minutes, gentle spin, spin 2minutes, all lights turning off means no spinning course .
The user can press the wash rinse spin button to compound program freely, the following is some common self programs.
Rinse
Rinse time and number of rinse will be different
between the 5 rinse programs. This program is
applicable for clothes that requires deep rinse
but not applicable for spinning.
Manual
View the manual for the Philco GJW55P here, for free. This manual comes under the category washing machines and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Philco GJW55P or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Philco GJW55P below.
What temperature should I use for my laundry?
The washing label of your garment shows the recommended washing temperature.
Do I need to use an anti-scaling agent for my washing machine?
It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.
How do I prevent my washing machine from smelling?
Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.
Is the manual of the Philco GJW55P available in English?
Yes, the manual of the Philco GJW55P is available in English .
Need help?
Do you have a question about the Philco and is the answer not in the manual?
Question and answer
Number of questions: 0