View the manual for the Peugeot Expert Tepee (2012) here, for free. This manual comes under the category cars and has been rated by 2 people with an average of a 9.4. This manual is available in the following languages: English. Do you have a question about the Peugeot Expert Tepee (2012) or do you need help? Ask your question here
Below you will find the product specifications and the manual specifications of the Peugeot Expert Tepee (2012).
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Peugeot Expert Tepee (2012) below.
1 mile equals 1.609344 kilometers and 1 kilometer equals 0.62137119 miles.
The location of the VIN number of the car differs per brand and type of car. The code may be stamped on the frame of the car or mounted on a plate. It is best to consult the manual of the Peugeot Expert Tepee (2012)for the exact location of the VIN number.
The VIN number of a car is an identification number unique to each car. The abbreviation VIN therefore stands for Vehicle Identification Number.
Regular maintenance is necessary for every car. How often the car needs maintenance and what exactly needs to be done can be found in the maintenance instructions. For major periodic service, this should generally be done every 2 years or after 30,000 kilometres.
It is recommended to change the brake fluid every two years.
E10 petrol consists of up to ten per cent ethanol while E5 petrol will contain less than five per cent ethanol. As a result, the percentage of E10 petrol is lower than that of E5 petrol, making it less bad for the environment.
The lock is most likely set to the child safety lock so it cannot be opened from the inside. How to unset the child safety lock differs per brand and type.
If your car radio does not turn on, it will not receive any power. Check that the red wire is connected to the contact power supply and the yellow wire to the constant power supply.
To ensure the best performance and maximum engine lifespan of your Peugeot Expert Tepee (2012) with TOTAL lubricants recommended for PEUGEOT vehicles, follow these steps: 1. Use TOTAL lubricants specifically formulated for PEUGEOT vehicles to match the latest technical innovations. 2. Optimize engine performance and protect emission control systems by using TOTAL lubricants. 3. Avoid using additives in the engine oil to preserve engine reliability and emission control devices. 4. Follow the manufacturer's maintenance schedule strictly for brake fluid replacement and use DOT4 compliant fluids. 5. Maintain oil levels between the MIN and MAX marks on the reservoir and check regularly with the engine cold and on a flat surface. 6. Choose the viscosity grade of oil recommended by the manufacturer to meet the vehicle's needs. 7. Consult the dashboard indicators for oil level verification and refer to the driver's manual for further guidance.
To ensure the proper functioning of the post-treatment systems in your Peugeot Expert Tepee (2012), follow these maintenance advice steps: 1. Have the heater checked at least once a year before winter by the PEUGEOT network or a qualified repairer. 2. Use only approved spare parts for maintenance and repairs. 3. Avoid using the heater in enclosed spaces without exhaust gas extraction to prevent the risk of intoxication and asphyxiation. 4. Do not park the vehicle on flammable surfaces to prevent the risk of fire. 5. Ensure the temperature near the heater does not exceed 120°C to avoid damaging electronic circuit components. 6. Regularly replace the oil filter according to the maintenance schedule. 7. Prioritize a combined cabin filter to purify the air and maintain a clean cabin environment. 8. Follow the maintenance booklet for replacement intervals based on environmental conditions and vehicle usage. 9. Drive at speeds of at least 60 km/h for 5 minutes to regenerate the particulate filter when needed.
To handle fuel interruptions and diesel repriming in your Peugeot Expert Tepee (2012) for optimal performance, follow these steps: 1. Refill the fuel tank with at least five liters of diesel. 2. Open the engine hood and locate the priming button. 3. Press the priming button firmly to re-prime the fuel circuit. 4. Start the engine by engaging the starter motor. 5. If the engine does not start on the first attempt, do not persist. Repeat the priming process and try starting the engine again. In case of a fuel cut-off due to a violent impact, the fuel flow to the engine is automatically stopped. To re-prime the diesel circuit: 1. Refill the fuel tank with at least five liters of diesel. 2. Use the manual priming pump located under the engine hood to prime the circuit until fuel appears in the transparent tube. 3. Start the engine using the starter motor. Ensure there are no fuel leaks, and if needed, restore the fuel flow by following the specified steps.
Yes, the manual of the Peugeot Expert Tepee (2012) is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Peugeot and is the answer not in the manual?
Question and answer
Number of questions: 0