Name: Peerless PAP-SANYO-ST1
Brand: Peerless
SKU: 199949
Rating: 99 (1 reviews)

ISSUED: 10-31-08 SHEET #: 056-9012-1

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

1 of 1

FRONT

Note: Actual parts may appear slightly different than illustrated.

Installation and Assembly - Projector Adapter Plate

Models: PAP-SANYO-ST1, PAP-SANYO-ST1-S,

PAP-SANYO-ST1-W

Peerless is a registered trademark of Peerless Industries, Inc.

IMPORTANT! Read entire instruction sheet before you

start installation and assembly.

Before you start check the parts list below to make sure all

of the parts shown are included.

• Installer must verify that the supporting surface will

safely support the combined weight of all attached

equipment and hardware.

WARNING

PROJECTOR

*Notch indicates front of projector.

Attach adapter plate (A) to projector using

four M4 x 8 mm socket pin serrated washer

head screws (B). Tighten using 4 mm allen

wrench (C).

BA C

SANYO-ST1 SANYO-ST1-S SANYO-ST1-W

Qty

Part # Part # Part #

A adapter plate 1 055-1878 055-4878 055-2878

B M4 x 8 mm socket pin serrated washer head screw 4 510-1005 510-2005 510-2005

C 4 mm allen wrench 1 560-9646 560-9646 560-9646

Parts List

Description

Need help?

Number of questions: 0

Do you have a question about the Peerless PAP-SANYO-ST1 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Peerless PAP-SANYO-ST1 owners to properly answer your question.

About the Peerless PAP-SANYO-ST1

View the manual for the Peerless PAP-SANYO-ST1 here, for free. This manual comes under the category Projector accessories and has been rated by 1 people with an average of a 9.9. This manual is available in the following languages: English. Do you have a question about the Peerless PAP-SANYO-ST1 or do you need help? Ask your question here