Peavey BTS 2.2 manual

Peavey BTS 2.2
(1)
  • Number of pages: 2
  • Filetype: PDF

FUNCTION

1. Volume Control

2. Play/Pause

3. Press 3 sec to Power ON (blue LED

light shown), Press 2 sec to Power OFF

4. Forward & Backward

5. 3.5 mm AUX-in

6. 3.5 mm headphones

7. SD/TF

8. USB INPUT

9. MINI USB 5V

10. Bluetooth ON/OFF

PEAVEY ELECTRONICS CORPORATION LIMITED WARRANTY
Effective Date: 06/01/2012
What This Warranty Covers
Your Peavey Warranty covers defects in material and workmanship in Peavey
products purchased and serviced in the U.S.A. and Canada.
What This Warranty Does Not Cover
The Warranty does not cover: (1) damage caused by accident, misuse, abuse,
improper installation or operation, rental, product modification or neglect; (2)
damage occurring during shipment; (3) damage caused by repair or service
performed by persons not authorized by Peavey; (4) products on which the serial
number has been altered, defaced or removed; (5) products not purchased from
an Authorized Peavey Dealer.
Who This Warranty Protects
This Warranty protects only the original purchaser of the product.
How Long This Warranty Lasts
The Warranty begins on the date of purchase by the original retail purchaser. The
duration of the Warranty is 90 days.
What Peavey Will Do
We will repair or replace (at Peavey’s discretion) products covered by Warranty at
no charge for labor or materials. If the product or component must be shipped to
Peavey for Warranty service, the consumer must pay initial shipping charges. If the
repairs are covered by Warranty, Peavey will pay the return shipping charges.
How To Get Warranty Service
(1) Take the defective item and your sales receipt or other proof of date of purchase
to your Authorized Peavey Dealer or Authorized Peavey Service Center.
OR
(2) Ship the defective item, prepaid, to Peavey Electronics Corporation, International
Service Center, 412 Highway 11 & 80 East, Meridian, MS 39301. Include a detailed
description of the problem, together with a copy of your sales receipt or other proof
of date of purchase as evidence of Warranty coverage. Also provide a complete
return address.
Limitation of Implied Warranties
ANY IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO
THE LENGTH OF THIS WARRANTY.
Some states do not allow limitations on how long an implied Warranty lasts, so the
above limitation may not apply to you.
Exclusions of Damages
PEAVEY’S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO THE
REPAIR OR REPLACEMENT OF THE PRODUCT, AT PEAVEY’S OPTION. IF
WE ELECT TO REPLACE THE PRODUCT, THE REPLACEMENT MAY BE A
RECONDITIONED UNIT. PEAVEY SHALL NOT BE LIABLE FOR DAMAGES
BASED ON INCONVENIENCE, LOSS OF USE, LOST PROFITS, LOST SAVINGS,
DAMAGE TO ANY OTHER EQUIPMENT OR OTHER ITEMS AT THE SITE OF
USE, OR ANY OTHER DAMAGES WHETHER INCIDENTAL, CONSEQUENTIAL
OR OTHERWISE, EVEN IF PEAVEY HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation may not apply to you.
This Warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
If you have any questions about this Warranty or services received or if you need
assistance in locating an Authorized Service Center, please contact the Peavey
International Service Center at (601) 483-5365.
Features and specifications are subject to change without notice.

BTS 2.2

BLUETOOTH SPEAKER

SPECIFICATIONS

Bluetooth Version: V2.1 + EDR (backward compatible) Frequency Band: 2400 – 2483.5 MHz Working Range: 10 Meters (33 Feet) Charging Input Voltage: 5V DC BluetoothProles: A2DP,HSP,HFP,AVRCP Internal Battery: 3.7 Volt Rechargeable Lithium Input: 3.5 mm Aux-In Jack Output: 3.5 mm Headphone Jack Rated Power: 2W x 2 Drivers Size: 7.165” x 2.283” x 1.3” Weight: 10.47 oz. Audio Playback Format: MP3 / WMA Storage Capacity: USB and SD/TF Card <32GB Speaker: Magnetically Shielded D40mm (4 ohms) / 2 Battery Charge Time: 3.5 Hours Play Time: 8.5 Hours Battery Voltage/Capacity: 850 mAh Device ID: PY-11BTNote: Bluetooth switch must be in the off position for use with SD Card or USB inputs.Flashing blue light indicates discoverable mode and unit is able to be seen by other bluetooth devices.
TO CHARGE:Connect MINI USB/USB cable to
computer or USB AC adapter. Red light illuminates
while charging.

PACKAGE CONTENTS: BTS 2.2 Speaker,

USB charging cable, and 3.5 mm audio

connector cable.

5 7 68 9 10
SIDE CONNECTIONS
1
3
4
2
FRONT PANEL

OPERATION

WIRELESS MODE:

Put mode switch (10) to Bluetooth “ON” mode.

Enable your Bluetooth device and select Device ID

“TL78666”.

If Bluetooth device is asking for a password, use

“0000”.

Speaker will “beep” when connected to Bluetooth

device.

WIRED MODE:

Put mode switch (10) to Bluetooth “OFF” mode.

Connect audio source’s output to the 3.5 mm audio

jack, SD Card or USB input.

Unitwilldetectsourceandplayinorderoftheles

on the Card/Drive.

Peavey BTS 2.2

Need help?

Number of questions: 0

Do you have a question about the Peavey BTS 2.2 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Peavey BTS 2.2 owners to properly answer your question.

View the manual for the Peavey BTS 2.2 here, for free. This manual comes under the category Cradles & Docking Stations and has been rated by 1 people with an average of a 9. This manual is available in the following languages: English. Do you have a question about the Peavey BTS 2.2 or do you need help? Ask your question here

Peavey BTS 2.2 specifications

General
Brand Peavey
Model BTS 2.2
Product Cradle / docking station
Language English
Filetype PDF
Loudspeakers
Audio output channels - channels
Number of speakers 1
Number of drivers 2
Driver diameter 40 mm
Speaker type -
Performance
Recommended usage -
Amplifier
Compatible memory cards microSD (TransFlash),SD
Audio
RMS rated power 4 W
Frequency range - Hz
Impedance 4 Ω
Design
Product colour White
Volume control Digital
On/off switch
Ports & interfaces
Bluetooth range 10 m
Connectivity technology Wired & Wireless
Headphone out
AUX in
Bluetooth profiles A2DP,AVRCP,HFP,HSP
Frequency range 2.4 GHz
Bluetooth
USB connectivity
3.5 mm connector
Power
Power source type USB
Battery voltage 3.7 V
Battery life (max) 8.5 h
Battery technology Lithium
Battery capacity 850 mAh
Battery recharge time 3.5 h
show more

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Peavey BTS 2.2.

Is your question not listed? Ask your question here