Parmco AR 900 manual

Parmco AR 900
8 · 1
PDF manual
 · 33 pages
English
manualParmco AR 900
31
The appliance comes fitted with an approved supply cord and can be connected to an
appropriately rated plug that is compatible with the socket-outlet that is fitted to the final sub-
circuit in the fixed wiring that is intended to supply this appliance. It is necessary that all
installation and connections are carried out by qualified personnel and that the connections meet
all New Zealand regulatory requirements.

Connection of Feed Cable to Mains

In the case of direct connection to the mains (hardwired without plug), it is necessary to insert a
suitable omnipolar switch before the appliance, with a minimum opening of 3mm between the
contacts the grounding wire should not be interrupted by the switch.
Before connecting to the mains, make sure that:
The electrical counter, the circuit breaker, feed cable, and socket are suitable to withstand the
maximum load requirements as detailed on the rating label.
The supply system is regularly grounded as per New Zealand regulations.
The socket or omnipolar switch can easily be reached after the appliance is installed.
After connection of the appliance to the mains, make sure no wires come into contact with any
parts of the appliance subjected to heating.
Never use reductions, shunts or adapters which can cause overheating or burning.
This appliance is not intended to be operated by means of an external timer of separate remote-
control system. It is essential that this unit is operated in conjunction with some form of
ventilation/extraction system. Parmco has a wide range of kitchen ventilation solutions available.

ELECTRICAL CONNECTION

Manual

View the manual for the Parmco AR 900 here, for free. This manual comes under the category stoves and has been rated by 1 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Parmco AR 900 or do you need help? Ask your question here

Need help?

Do you have a question about the Parmco and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Parmco AR 900 specifications

Below you will find the product specifications and the manual specifications of the Parmco AR 900.

General
BrandParmco
ModelAR 900
Productstove
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Parmco AR 900 below.

Can I use my pans on induction?

Nowadays almost all pans are suitable for induction. You can easily test whether your old pans can also be used on induction by holding a magnet against the bottom of the pan. If the magnet stays on the pan, your old pan is suitable for induction.

How do I reset my induction hob?

Most induction hobs can be reset by disconnecting the hob from power by unplugging it from the power outlet. You will then have to wait at least 60 minutes.

What is a Perilex connection?

A Perilex connection is a special connection that can handle more power than a normal connection. This connection has five holes instead of two and is often used for induction hobs.

Is cooking on induction dangerous?

No, cooking on induction is not dangerous.

Is the manual of the Parmco AR 900 available in English?

Yes, the manual of the Parmco AR 900 is available in English .

Is your question not listed? Ask your question here

No results