View the manual for the Parkside PDFW 120 A2 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Parkside PDFW 120 A2 or do you need help? Ask your question here
The Parkside PDFW 120 A2 is a product that falls into an uncategorized category. It is a tool that is primarily used for a specific purpose, although the exact purpose is unknown due to the lack of information available about this tool. The Parkside PDFW 120 A2 is designed with certain specifications in mind, but these specifications are also unknown. The tool is made with standard and basic materials, although the exact materials used are not specified. It can be assumed that the Parkside PDFW 120 A2 is built to a certain level of quality and reliability, but without further information, it is difficult to determine the extent of its durability. Overall, the Parkside PDFW 120 A2 does not have enough information to provide a detailed and objective description.
| Brand | Parkside |
| Model | PDFW 120 A2 |
| Product | not categorized |
| EAN | 4055334052085 |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Parkside PDFW 120 A2 below.
To adjust the cutting depth of the Parkside PDFW 120 A2, you can use the depth adjustment knob located on the side of the tool. Rotating it clockwise will increase the cutting depth, while rotating it counterclockwise will decrease it.
To change the blade on the Parkside PDFW 120 A2, you need to follow these steps: 1) Make sure the tool is unplugged. 2) Use the provided wrench to loosen the blade nut. 3) Remove the old blade. 4) Insert the new blade, ensuring it is properly aligned. 5) Tighten the blade nut securely using the wrench.
The maximum cutting capacity of the Parkside PDFW 120 A2 is 120 millimeters. This means it can cut through materials with a thickness up to 12 centimeters.
To adjust the bevel angle on the Parkside PDFW 120 A2, you need to loosen the bevel locking knob located at the front of the tool. Once loosened, you can tilt the base plate to the desired angle and then tighten the knob to secure it in place.
The Parkside PDFW 120 A2 is equipped with a dust extraction port at the back of the tool. You can connect a suitable dust extraction system to this port using a standard vacuum hose. This will help to minimize dust and debris during operation, ensuring a cleaner work environment.
Yes, the manual of the Parkside PDFW 120 A2 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Parkside and is the answer not in the manual?
Question and answer
Number of questions: 0