View the manual for the Parkside PBTS 370 A1 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Parkside PBTS 370 A1 or do you need help? Ask your question here
| Brand | Parkside |
| Model | PBTS 370 A1 |
| Product | not categorized |
| EAN | 4056233640359 |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Parkside PBTS 370 A1 below.
If you encounter any damages while using the Parkside PBTS 370 A1, follow these steps: 1. Stop using the equipment immediately to prevent further damage or injury. 2. Assess the nature and extent of the damage. Check if any parts are broken, bent, or malfunctioning. 3. If the damage is minor and can be easily repaired, refer to the troubleshooting section of the manual for guidance on how to fix common issues. 4. If the damage is significant or beyond your ability to repair, contact the service department mentioned in the warranty certificate section of the manual. They will provide assistance and guidance on how to proceed. 5. Provide a detailed description of the problem when contacting the service department. Include information about the nature of the damage, any error messages displayed, and any unusual sounds or behaviors observed. 6. Follow the instructions provided by the service department for returning the device for repair or replacement. 7. If the damage is not covered by the warranty or if the warranty period has expired, consider seeking professional repair services or contacting a qualified technician for assistance. Remember, it is important to follow the instructions in the manual and not attempt to tamper with or repair the equipment yourself, as this may void the warranty or cause further damage.
To interpret the symbols on the Parkside PBTS 370 A1, follow these steps: 1. Read the operating and safety instructions before starting up the device. This is important to ensure safe and proper usage. 2. Pay attention to the symbols on the device, as they provide important information and warnings. 3. The symbol of a warning sign indicates a potential risk of death, injury, or damage to the tool. Disregarding this warning can be dangerous. 4. The symbol of an eye indicates the need to wear eye protection while using the device. This is to protect your eyes from any potential hazards. 5. The symbol of an ear indicates the need to wear hearing protection. This is important to prevent hearing damage from prolonged exposure to loud noise. 6. If dust builds up during operation, the symbol of a respiratory mask indicates the need to wear respiratory protection. This is to protect your lungs from inhaling dust particles. 7. Pay attention to the running direction of the sanding belt. There is a warning symbol indicating the danger of injury if you reach into the sanding disc while it is running. Always ensure your hands and fingers are kept away from the moving parts. By understanding and following these symbols, you can ensure safe and effective use of the Parkside PBTS 370 A1.
To determine the correct running direction of the sanding belt on the Parkside PBTS 370 A1, follow these steps: 1. Pull out the mains plug to ensure the device is not powered. 2. Remove the sanding belt from the device by reducing the tension and sliding it to the rear. 3. Take note of the running direction indicated on the housing and on the inside of the sanding belt. 4. When installing a new sanding belt, ensure that the running direction matches the indicated direction. 5. Slowly push the sanding belt by hand in the running direction to ensure it runs centrally on the sanding surface. 6. If the sanding belt is not running centrally, use the knurled screw to make adjustments until it is properly aligned. 7. If you need to move the sanding position of the sanding belt, loosen the Allen screw and adjust it to the desired position. Tighten the Allen screw to fix the new position. 8. If you need to replace the sanding paper on the sanding disc, dismantle the bottom disc guard and remove the old sanding paper. Attach the new sanding paper using the quick-fit fastening system. By following these steps, you can determine and ensure the correct running direction of the sanding belt on the Parkside PBTS 370 A1.
Yes, the manual of the Parkside PBTS 370 A1 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Parkside and is the answer not in the manual?
Question and answer
Number of questions: 0