Parkside PBS 2 A1 manual

Parkside PBS 2 A1
7.5 · 1
PDF manual
 · 180 pages
manualParkside PBS 2 A1




Translation of the original instructions


Traduction des instructions d‘origine


Vertaling van de originele gebruiksaanwijzing


Překlad originálního provozního návodu



Tłumaczenie oryginalnej instrukcji obsługi


reklad originálneho návodu na obsluhu

IAN 309505

View the manual for the Parkside PBS 2 A1 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Parkside PBS 2 A1 or do you need help? Ask your question here

Need help?

Do you have a question about the Parkside and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Parkside owners to provide you with a good answer.

Number of questions: 0

PBS 2 A1
not categorized
User manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Parkside PBS 2 A1 below.

How do I accurately adjust the cutting depth of my Parkside PBS 2 A1?

To adjust the cutting depth on your Parkside PBS 2 A1, simply locate the cutting depth adjustment lever located on the side of the tool. By sliding this lever up or down, you can easily set the desired cutting depth for your task.

What is the maximum cutting capacity of the Parkside PBS 2 A1?

The Parkside PBS 2 A1 has a maximum cutting capacity of 55 millimeters (mm) for wood and 6 millimeters (mm) for steel. Ensure you do not exceed these limits to ensure optimal performance and safety.

How can I change the blade on my Parkside PBS 2 A1?

To change the blade on your Parkside PBS 2 A1, start by disconnecting the tool from the power source. Next, locate the blade release lever near the blade holder and push or pull it to release the current blade. Then, insert the new blade into the holder, ensuring it is properly seated and engaged. Finally, release the blade release lever to secure the new blade in place.

What is the recommended speed for cutting various materials with the Parkside PBS 2 A1?

When using the Parkside PBS 2 A1, it is important to adjust the speed according to the material you are cutting. For wood, it is recommended to use a lower speed setting around 1,500 revolutions per minute (rpm), while for metal, a higher speed setting around 3,000 rpm is suitable. Adjust the speed accordingly to achieve the best results.

What safety precautions should I take when using the Parkside PBS 2 A1?

When operating the Parkside PBS 2 A1, always prioritize safety. Ensure you wear appropriate personal protective equipment such as safety glasses and gloves. Keep a firm grip on the tool and maintain a stable stance. Avoid loose clothing or jewelry that could get caught in the tool. Additionally, make sure the workpiece is securely clamped or held in place to prevent it from moving during operation.

Is the manual of the Parkside PBS 2 A1 available in English?

Yes, the manual of the Parkside PBS 2 A1 is available in English .

Is your question not listed? Ask your question here

No results