View the manual for the Parkside PATC 2 B1 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Parkside PATC 2 B1 or do you need help? Ask your question here
Below you will find the product specifications and the manual specifications of the Parkside PATC 2 B1.
| Brand | Parkside |
| Model | PATC 2 B1 |
| Product | not categorized |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Parkside PATC 2 B1 below.
To properly use the Parkside PATC 2 B1 for its intended purpose, follow these steps: 1. Familiarize yourself with the safety information and instructions for use provided in the product's documentation. 2. Ensure that you are using the product in a dry indoor location, such as a store room or garage, as it is only suitable for private use in these environments. 3. Take note that the Parkside PATC 2 B1 is not intended for commercial use or for use in other applications. 4. Before using the product, check that all the necessary parts are present, including the hook, strip light, ON/OFF switch, magnetic base, charging indicator, USB input socket, joint, USB cable, and rechargeable battery. 5. If the battery is not fully charged, connect the product to a properly installed USB socket using a SELV adapter with a maximum output voltage of 5V and a current of 500mA. 6. Once the product is fully charged, it can provide light for approximately 4-5 hours. 7. Use the ON/OFF switch to control the light and adjust the position of the product using the hook and joint as needed. 8. When not in use, store the Parkside PATC 2 B1 in a safe and dry place. By following these steps, you can ensure that you are using the Parkside PATC 2 B1 correctly and safely for its intended purpose.
Before using the Parkside PATC 2 B1, it is important to take the following precautions: 1. Inspect the product: Check that all the necessary parts are present and in good condition, including the hook, strip light, ON/OFF switch, magnetic base, charging indicator, USB input socket, joint, USB cable, and rechargeable battery. Ensure there are no visible signs of damage or defects. 2. Read the instructions: Familiarize yourself with the safety information and instructions for use provided in the product's documentation. Pay attention to any specific warnings or precautions mentioned. 3. Suitable environment: Use the product in a dry indoor location, such as a store room or garage. It is not suitable for outdoor or wet conditions. 4. Charging: Before using the product, ensure that the battery is fully charged. Connect the product to a properly installed USB socket using a SELV adapter with a maximum output voltage of 5V and a current of 500mA. 5. Safe handling: Handle the product with care and avoid dropping or subjecting it to excessive force. Keep it away from children and pets. 6. Proper use: Use the product only for its intended purpose. Do not modify or tamper with the product in any way. By following these precautions, you can ensure safe and proper use of the Parkside PATC 2 B1.
To charge the Parkside PATC 2 B1, follow these steps: 1. Remove all packaging materials from the product. 2. Connect the USB connector of the USB cable to the USB input socket of the product. 3. Insert the USB plug of the USB cable into a USB port on a USB power supply. 4. Ensure that the USB power supply is properly installed and provides a maximum output voltage of 5V and a current of 500mA. 5. The charging indicator on the product will illuminate red during the charging process. 6. Allow the product to charge for approximately 12 hours before first use. 7. If the product has not been charged for an extended period of time (approximately 2 months), it may enter a dormant state. To reactivate the integral rechargeable battery, charge and discharge the product a number of times in succession. 8. Once the charging process is complete, the charging indicator will illuminate green. 9. Disconnect the product from the USB power supply. By following these steps, you can properly charge the Parkside PATC 2 B1 and ensure that it is ready for use.
Yes, you can use the Parkside PATC 2 B1 without a power connection. Here are the steps to use it without a power connection: 1. Ensure that the product is fully charged. Connect the USB connector of the USB cable to the USB input socket of the product, and insert the USB plug of the USB cable into a USB port on a USB power supply. Charge the product for approximately 12 hours before first use. 2. Once the product is fully charged, it can be used without a power connection. The product can be operated in three different modes. To select a mode, repeatedly press the ON/OFF switch on the product. 3. The first press of the ON/OFF switch will activate the product with full power, illuminating the light strip at its maximum brightness. 4. The second press of the ON/OFF switch will activate the product with low power, illuminating the light strip at a lower brightness level. 5. The third press of the ON/OFF switch will turn off the product. By following these steps, you can use the Parkside PATC 2 B1 without a power connection and adjust the brightness level according to your needs.
Before using the Parkside PATC 2 B1, follow these steps: 1. Inspect the product: Check that all the necessary parts are present and in good condition, including the hook, strip light, ON/OFF switch, magnetic base, charging indicator, USB input socket, joint, USB cable, and rechargeable battery. Ensure there are no visible signs of damage or defects. 2. Read the instructions: Familiarize yourself with the safety information and instructions for use provided in the product's documentation. Pay attention to any specific warnings or precautions mentioned. 3. Charge the product: Connect the USB connector of the USB cable to the USB input socket of the product, and insert the USB plug of the USB cable into a USB port on a USB power supply. Charge the product for approximately 12 hours before first use. 4. Familiarize yourself with the modes: The product can be operated in three different modes. To select a mode, repeatedly press the ON/OFF switch on the product. The first press activates the product with full power, the second press activates it with low power, and the third press turns it off. 5. Store the product properly: When not in use, store the Parkside PATC 2 B1 in a safe and dry place, away from children and pets. By following these steps, you can ensure that you are properly prepared to use the Parkside PATC 2 B1 and maximize its functionality.
Yes, the manual of the Parkside PATC 2 B1 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Parkside and is the answer not in the manual?
Question and answer
Number of questions: 0