Panasonic Viera TX-40CX800E manual

Panasonic Viera TX-40CX800E
9.3 · 1
PDF manual
 · 361 pages
English
manualPanasonic Viera TX-40CX800E

Manual Tuning

Normally use Auto Setup or Update Channel List to retune DVB channels.
If tuning has not been done completely or for adjusting the direction of the
aerial or dish, use this function. (DVB)
All DVB channels found are added to Channel List.

DVB-S

Please consult the received satellite broadcasting companies for the
setting.
1. Select Transponder Frequency / Symbol Rate / Polarisation / Modulation /
Service ID and set with Cursor buttons or Numeric buttons.
2. Select Start scan and press OK to search.

DVB-C

1. Enter the frequency with Numeric buttons.
Normally set Symbol Rate and Service ID to Auto.
2. Select Start scan and press OK to search.

DVB-T

1. Select a channel and adjust frequency for each channel.
Set where the level of Signal Quality becomes the maximum.
2. Press OK to search.

Analogue

Set Analogue channel manually after Auto Setup.
Set Sound System and Colour System, and then perform this function.
Normally set Colour System to Auto.
SC1: PAL B, G, H / SECAM B, G
SC2: PAL I
SC3: PAL D, K / SECAM D, K
F: SECAM L, L
- 121 -

Manual

View the manual for the Panasonic Viera TX-40CX800E here, for free. This manual comes under the category televisions and has been rated by 1 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Panasonic Viera TX-40CX800E or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Panasonic and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Panasonic Viera TX-40CX800E specifications

Below you will find the product specifications and the manual specifications of the Panasonic Viera TX-40CX800E.

General
BrandPanasonic
ModelViera TX-40CX800E
Producttelevision
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic Viera TX-40CX800E below.

What's the best viewing distance for my Panasonic television?

The ideal viewing distance for your Panasonic television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

Is the manual of the Panasonic Viera TX-40CX800E available in English?

Yes, the manual of the Panasonic Viera TX-40CX800E is available in English .

Is your question not listed? Ask your question here

No results