The thumbnail refers to a reduced image displayed on Disc Navigation to help distinguish recorded scenes.
Normally, the first image of the recorded scene is displayed as a thumbnail: You can choose another image
of the scene for thumbnail. If you set a vivid image to thumbnail, you can know what you recorded from
a glance at the Disc Navigation screen.
1 Press the DISC NAVIGATION button.
2 Select the thumbnail of the scene to be changed.
3 Press the MENU button.
4 Choose “Scene”, “Edit”,
“Thumbnail”, and then
press the A button.
5 The “Change Thumbnail”
screen will appear: If you
are sure you want to
change the thumbnail of
the selected scene, press
the A button: The
selected scene will be
played back.
If you want to change the scene whose
thumbnail is to be changed, you can change it on
this screen.
6 When the image you want to use as the
thumbnail of the scene appears, press the
SELECT button.
7 The screen for verifying
switching of thumbnail will
appear: Choose “YES”,
and then press the A
button.
Choose “NO” to cancel
switching of thumbnail.
After Yes or No setting, the “Change Thumbnail”
screen will be restored.
Repeat steps 5-7 to change the other scenes.
8Press the B button to quit.
Note:
•If you press the MENU button before pressing the A
button in step 5, the submenu screen will appear (See
page 88).
•A thumbnail of still cannot be changed.
•Since the scene to which skipping is set cannot be played
back, you will not be able to change its thumbnail:
Release the skip setting of the scene to change the
thumbnail.
● ● ● ● ● ●
Original thumbnailYou can use this image as thumbnail.
Scene
RAM
ENTERRETURN
Delete
Edit
Copy
Select
Detail
Skip
Fade
Combine
Divide
Thumbnail
Move
ETC
Select Thumbnail Point
ENTERCANCEL
SEL
ENTER
Change thu
m
bnai l?
Change Thu
m
bnai l
YESNO
ENG.book 89 ページ 2003年3月20日 木曜日 午後4時49分
Manual
View the manual for the Panasonic VDR-M30EG here, for free. This manual comes under the category camcorders and has been rated by 1 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the Panasonic VDR-M30EG or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Panasonic VDR-M30EG below.
What is a megapixel?
The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.
What does the abbreviation 'MP' stand for?
MP stands for MegaPixels.
Is the manual of the Panasonic VDR-M30EG available in English?
Yes, the manual of the Panasonic VDR-M30EG is available in English .
Need help?
Do you have a question about the Panasonic and is the answer not in the manual?
Question and answer
Number of questions: 0